1-888-955-6000
crutchfield.com
Crutchfield

Scosche FD134030B Factory Integration Adapter

Allows you to install and connect a new car stereo to 1996-99 Ford Taurus and Mercury Sable models with the factory rotary climate controls

Save with a compatible car stereo with a compatible car stereo
Zoom
  • Scosche FD134030B Factory Integration Adapter

    Front

  • Scosche FD134030B Factory Integration Adapter

 

Our take on the Scosche FD134030B Factory Integration Adapter

Scosche

Until now, if you wanted to replace the factory radio in your 1996-99 Ford Taurus or Mercury Sable, you were out of luck. The Ford-built "radio" is an oval control panel that houses climate controls along with the radio tuning and cassette mechanisms. The unusual shape and inclusion of temperature controls prohibited any aftermarket receivers from working in this location. You were stuck with just the cassette deck unless you shelled out $500 to $600 for the CD changer option from the dealer.

Now, if your Taurus or Sable has mechanical climate controls, you can upgrade to an in-dash CD player or a better cassette deck, thanks to this innovative Scosche FD134030B integration adapter. It fits the oval opening in the Taurus or Sable perfectly. Plus, it includes a series of plugs to operate the climate controls. You transfer the switches and knobs from the factory oval control panel into the new panel.

Important Note: When installing an aftermarket radio, you will need to run the provided antenna extension cable and speaker extension harness from the Ford rear tuner/amp unit to your new receiver.

See more info on this item

Note: Most vehicles will require additional installation parts — please identify your vehicle if you haven’t done so, then check here for a list of parts. You can also call an Advisor for more information.

Hands-on research from the Crutchfield Labs (what are the Labs?)

Product Research
What's in the box?

Download owner's manual

  • Receiver mounting bracket with attached wires and plugs
  • Left and right ISO mount brackets
  • DIN radio trim plate
  • 18' FDA-18 Ford antenna extension cable (with male Motorola plug on one end and a right-angle male Ford plug on the other)
  • 7" FD22 Wiring adapter harness
  • 17.5' FD12 Power/speaker wiring harness
  • Instruction sheet

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features
Manual Correction

Features

Product Description: This kit allows you to install an aftermarket receiver into 1996-99 Ford Taurus/Mercury Sable models with rotary climate controls. The oval-shaped kit has a rectangular DIN opening for the receiver. Three circular openings below the receiver slot accommodate the factory Fan Control switch, Vent Control switch and Temperature Control switch. The Rear Defrost switch and indicator light are also located on the front of the kit. Attached to the rear of the kit are several wires, some of which plug into factory harnesses and others that need to be spliced into the wiring of the new receiver.

Receiver Mounting Options: You can mount the radio into the kit from the front using the radio's mounting sleeve, or you can mount the radio into the kit from the rear by using the supplied ISO mount brackets. In both cases, you will need to use the supplied DIN trim ring. It is recommended that you support the rear of the receiver with the support strap supplied with the radio to add to the installation's structural integrity.

Modifications: For Ford Taurus/Mercury Sable models with floor consoles, a minor modification to the factory trim panel may be necessary. A small corner of the factory trim may need to be filed or cut in order for the kit to fit the opening. The modified area will not be visible after the receiver has been installed, and should not affect the re-installation of the factory radio.

Kit Wiring: Attached to the back of the kit are two sets of wires: a defroster harness (green plug) and a radio power harness (white plug). These plug into the vehicle harnesses, either directly (1996-97 models) or with the supplied FD22 adapter harness (1998-99 models). Four 6" wires coming out of the radio power harness (white plug) need to be spliced to the new receiver's wiring harness using the following color codes:

  • Yellow: 12 Volts Constant Power
  • Red: 12 Volts Switched Power
  • Orange: Illumination (dash lights)
  • Black: Chassis Ground

Speaker Wiring Adapter/Amplifier Bypass: Supplied with the kit is a 17-1/2' Speaker Wiring adapter harness that carries the output signal from the new receiver to the factory speaker harness, located in the rear of the vehicle. The bare ends of this harness need to be spliced to the speaker output wires of the new receiver. The other end contains the 14-pin Speaker Input Plug which connects to the factory speaker harness after it has been disconnected from the amplifier output. (Note: The factory amplifier is located in the rear of the vehicle and the speaker wiring harness, along with the supplied antenna extension cable, need to be routed from the radio location to the rear of the vehicle.) The factory amplifier is bypassed and the speakers are powered by the new receiver. The color codes for the Speaker Wiring Adapter are:

  • White: Left Front Speaker Positive
  • White/Black: Left Front Speaker Negative
  • Green: Left Rear Speaker Positive
  • Green/Black: Left Rear Speaker Negative
  • Gray: Right Front Speaker Positive
  • Gray/Black: Right Front Speaker Negative
  • Violet: Right Rear Speaker Positive
  • Violet/Black: Right Rear Speaker Negative

Note On Receiver Wiring: The wire colors of the new receiver may, or may not, match the wire colors of the adapter. You will need to match the adapter and receiver wires by function, disregarding color.

Manual Correction

Wire Color Codes: The manual (Page 4) lists the factory color codes of the Black 14-pin Speaker Input plug incorrectly. The correct functions for each wire are printed on the actual wires on the supplied 17-1/2' speaker wiring harness, and match the color code list above.

 
Review this product
Great Gear Giveaway rewards card

Submit a review and then enter to win a $500 rewards card

Scosche FD134030B Factory Integration Adapter Reviews

Average Customer Review:

52 people say:

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left
Filter by rating:
5 out of 5

factory panel

Written By Sito, brawley, ca on Sunday, November 10, 2013
Crutchfield Customer Review (What's this?)
 
This panel made everything super easy to change out. AWESOME!
Pros:
Evening switched out into this panel with ease AWESOME factory fIitpanel
Cons:
None
Was this review helpful?    Yes | No
 
4 out of 5

Scosche FD134030B Adapter

Written By Adapter ford mercury, Waukesha , Wisconsin on Tuesday, July 02, 2013
Crutchfield Customer Review (What's this?)
 
ok good to fit a smallest 1 din radio deck
Pros:
nice adapter good quality made
Cons:
a little hard to install
Was this review helpful?    Yes | No
 
5 out of 5

Scosche Integration Adapter

Written By Jake, Towanda, PA on Friday, May 24, 2013
Crutchfield Customer Review (What's this?)
 
Just installed this in a 99 Taurus. Took me a few hours, but looks great in the car It is easy to install, but can be time consuming if you've never done it before, since wiring needs to be ran from the amp in the trunk Well worth it.
Pros:
Good quality Great fit Easy to install
Cons:
Not really a big deal, but I had to trim some plastic off of the right climate control dial cut out. for the plug to fit properly Instructions could be a little more detailed, but with a little common sense, it's not that hard.
Was this review helpful?    Yes | No
 
4 out of 5

Does the job

Written By Jeff, Nashville,TN on Sunday, May 19, 2013
Crutchfield Customer Review (What's this?)
 
Replaces front for very strange Ford Taurus radio
Pros:
good fit
Cons:
Seems a bit cheap
Was this review helpful?    Yes | No
 
5 out of 5

Scosche FD134030B Factory Integration Adapter

Written By jerny06, portland, or on Saturday, December 15, 2012
Crutchfield Customer Review (What's this?)
 
I'm so glad somebody decided to create this so those of us who have our radios built into the climate controls are able to upgrade our sound systems.
Pros:
Great conversion kit!
Was this review helpful?    Yes | No
 
1 out of 5

Very poor product

Written By bradxt, Portland, OR on Friday, December 14, 2012
 
I have purchased this product twice, and I wish I had never puchased it at all. My second purchase was to replace the first. In both cases, the brackets that actually hold the stereo into the faceplate fail to lock and hold the stereo in place - even with a rear bracket installed. In addition, the package does not come with the springs that hold the faceplate into the dash. This is not described on the website, and it has caused me no end of trouble because one of my OEM springs is broken.
Pros:
Looks nice, fits the dash as advertised
Cons:
missing key elements (e.g. screws to hold the switches in place and the springs that hold the faceplate in the dash). Reuse of existing parts required. This is not described on the website. In my Taurus, half of the screws I was supposed to reuse don't exist, and one of the springs I was supposed to reused is broken. On top of that, the stereo brackets don't fully lock in place and hold the stereo securely. Very poor product and not worth the money.
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Reviews for the Ford/Mercury Factory Stereo Integration Package

Written By Rick, Clarksville,TN on Thursday, November 22, 2012
Crutchfield Customer Review (What's this?)
 
I would not recomend this for a novice installer. You need a few more tools than are described in the instructions. You will need a small set of metric torx bits,the tool to remove factory unit and a set of small metric sockets. The kit was complete with all you need to install the new stereo. You do not need to buy an antenna adapter,it comes with the kit.But all in all I was able to figure it out in about 3 hours.Had to go to a stereo installer shop to have them remove the factory unit. Would recomend this kit for a good looking install.
Pros:
Very complete
Cons:
Instructions lacking a few tools needed.
Was this review helpful?    Yes | No
 
4 out of 5

Scosche FD134030B Factory Integration Adapter

Written By TZER56, VA on Thursday, September 27, 2012
Crutchfield Customer Review (What's this?)
 
BETTER THEN MOST FOR THE MONEY
Pros:
A LITTLE CHEAP LOOKING
Cons:
BUT GFOR THE PRICEEEAT
Was this review helpful?    Yes | No
 
4 out of 5

Scosche FD134030B Factory Integration Adapter

Written By Anonymous, Milltown WI on Wednesday, July 18, 2012
Crutchfield Customer Review (What's this?)
 
I am so happy to have a new stereo system in my car that I can listen to CDs and my Ipod. However it was not as simple to install as we had hoped. Had to run wires from the trunk up to the stereo. And then connect the wires to the stereo it was not already set up. Took a couple of hours.
Pros:
New stereo!!!
Cons:
Long hook up time. Be ready to spend some time in your car! And be careful while taking things out! Don't throw anything from the original away until you are done. Need the front and back of the climate controls.
Was this review helpful?    Yes | No
 
5 out of 5

Scosche FD134030B Factory Integration Adapter

Written By william, pa on Tuesday, May 01, 2012
Crutchfield Customer Review (What's this?)
 
Easy to use
Was this review helpful?    Yes | No
 
5 out of 5

Good service

Written By george, Berkeley Springs, West Virginia on Friday, March 09, 2012
Crutchfield Customer Review (What's this?)
 
The kit to change my radio from one car to the other was everything that I needed. I had a few questions, and when I called the help line, I got connected very quickly, even on a Sunday. The help was accurate and had me going in a short time. I will buy all my radio items here from now on.
Was this review helpful?    Yes | No
 
5 out of 5

Scosche FD134030B Factory Integration Adapter

Written By CameronR, gallipolis ferry, WV on Wednesday, September 21, 2011
Crutchfield Customer Review (What's this?)
 
good product toke longer to instill than i thought but works really good
Was this review helpful?    Yes | No
 
5 out of 5

Scosche FD134030B Factory Integration Adapter

Written By john p, globe,az on Sunday, August 28, 2011
Crutchfield Customer Review (What's this?)
 
GREAT ITEM,MAKES INSTALL SOOO EASY,EASY TO UNDERSTAND....
Was this review helpful?    Yes | No
 
3 out of 5

Scosche FD134030B Factory Integration Adapter

Written By Shawn E, Anoka, MN on Sunday, August 07, 2011
Crutchfield Customer Review (What's this?)
 
All in all it seems to be a good product, doesn't seem "cheap". The outside edge of the main unit has a felt lining so when you're on a bouncy road you don't have a plastic to plastic rubbing squeak. Nice wires and connecters HOWEVER it was missing the "7" FD22 Wiring adapter harness" that is required for my 1998 Ford Taurus so make sure when you get it check to see if it's in the package, in the image of the product it's the harness to the left of the main unit with 1 big black connecter with 1 small black and 1 small white connecters on the other end.

The Scosche directions that come with the unit are "ok", they could have a little more and clearer info. Crutchfield also sends their own set of installation instructions that are pretty nice but still lacks a little info.
3 out of 3 people found this helpful
Was this review helpful?    Yes | No
 
4 out of 5

Ford.. What were they thinking

Written By KevinK, Montague, NJ on Wednesday, July 06, 2011
Crutchfield Customer Review (What's this?)
 
It is a great little kit with everything you need.. Not sure what Ford was thinking throwing the speaker wire attachments and antennae into the trunk of the car...
Was this review helpful?    Yes | No
 
5 out of 5

Scosche FD134030B Factory Integration Adapter

Written By Greg A, Mo on Monday, May 30, 2011
Crutchfield Customer Review (What's this?)
 
An easy install for a tough set up. Good instructions.
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Scosche FD134030B Factory Integration Adapter

Written By Randy L, Carlinville, Il on Friday, May 27, 2011
Crutchfield Customer Review (What's this?)
 
The kit worked perfectily and the phone rep was outstanding in his support and help.
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Scosche FD134030B Factory Integration Adapter

Written By 802mikes, lake placid ny on Wednesday, May 04, 2011
Crutchfield Customer Review (What's this?)
 
it fit the car perfectly.now all i need is better speakers
Was this review helpful?    Yes | No
 
5 out of 5

Scosche FD134030B Factory Integration Adapter

Written By Anonymous, Spokane, WA on Wednesday, April 27, 2011
Crutchfield Customer Review (What's this?)
 
Excellent product. Easy changeover, and works and appears great!!!!
Was this review helpful?    Yes | No
 
5 out of 5

Scosche comes through again

Written By John L, Arizona on Thursday, April 21, 2011
Crutchfield Customer Review (What's this?)
 
I used the Taurus adapter kit in my niece's car. It took a few minutes to figure it
out, but all of the parts were expertly engineered and fit perfectly. Even with
mad fabricating skills, I could never come close to the fitment and quality of this
kit, especially for the price.
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Scosche FD134030B Factory Integration Adapter

Written By Alex, Houston, Texas on Thursday, March 10, 2011
Crutchfield Customer Review (What's this?)
 
Bought this for my mom's 99 mercury sable. She wanted to put a cd player and
this product worked great. The instalation was easy with the instruction that
came with it.
Was this review helpful?    Yes | No
 
5 out of 5

Scosche FD134030B Factory Integration Adapter

Written By Jordan, Y-town, Ohio on Thursday, February 17, 2011
Crutchfield Customer Review (What's this?)
 
I absolutely love this kit. I own a 1999 Ford Taurus, and this little thing fit like a charm. Installing this was easier then i thought it was going to be. the hardest part of my whole installation was getting the factory radio out since the pins were kind of bent and didn't want to pop out. but after that it was smooth sailing. I still need to organize the wires under my dash since they hang low a little, but i still want to install a Sub, so i'll wait till then. I love that crutchfield lowered the price of this since i bought a radio with it. it made things a lot easier then trying to buy it locally. I recommend this to anyone that needs to use it. don't be afraid to get a new radio, it looks nice too. Theres just one thing that was more of a nuisance then a Con, is that the new temperature controls are back lit red, which makes it look like an older Pontiac,, but its easy to get used to.
Was this review helpful?    Yes | No
 
4 out of 5

1998 Taurus installation kit

Written By Ravenator, Granite Falls, WA on Thursday, February 17, 2011
Crutchfield Customer Review (What's this?)
 
This kit is fairly easy to use and hook up.
Was this review helpful?    Yes | No
 
4 out of 5

Gets the job done, but not trivial

Written By Anonymous, Warwick, NY on Monday, February 07, 2011
Crutchfield Customer Review (What's this?)
 
Without getting into custom dash mods, this is probably your only option for replacing the
factory stereo if you have an old Ford like me. And apparently this is only good for the
pneumatic controlled climate control - I am not sure if there is another option for
electronic controls

They layout of the controls is similar to the original, however the rectangular profile of the
receiver itself doesn't blend as smoothly into the rounded contours of the panel. I
suppose you can't fit a square peg into a round hole without some compromises. Also,
the upper display area becomes just a blank expanse of black. I would prefer to see
some more imaginative styling...

Installation was not trivial, but the kit gives you most everything that you need to ultimately
get the job done. I had a few difficulties...

1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

GREAT!

Written By Megan, DePere, WI on Sunday, January 30, 2011
Crutchfield Customer Review (What's this?)
 
This was exactly what we were looking for, it came w/all the pieces we needed.
Was this review helpful?    Yes | No
 
5 out of 5

Stereo Package

Written By Ricky, Perry. GA on Saturday, October 02, 2010
Crutchfield Customer Review (What's this?)
 
Just what I needed to change out my granddaughter's radio.
Was this review helpful?    Yes | No
 
5 out of 5

Scosche FD134030B Factory Integration Adapter

Written By Bob, Union, MO on Sunday, August 29, 2010
 
I had no problem with this intallation. Just be careful detaching factory plugs. The
vacuum plug has flimsy plastic. I had a couple of tabs break off the part you transfer to
the new faceplate. Luckily the plug was secure when I re-attached it. No vacuum leaks
so far.I took my time and routed cables along races at the drivers side door sills and up
the back seat. took better part of a day, but i want good clean install. I don't see the
complaint from other reviewer who said the panel lights shone thru at edges. I love
Scoshe accsessories they are of very good quality. Thanks Crutchfield your phone staff
is great. My order came timely and in perfect condition. I've been a customer of yours for
20 years and will continue to be.
Bob in MO
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Scosche FD134030B Factory Integration Adapter

Written By Scott, ST.Clair, Michigan on Friday, August 21, 2009
Crutchfield Customer Review (What's this?)
 
This unit is awesome, it installed with ease. The directions are easy to
follow, the HVAC controls transferred with ease. When I installed the new
radio I attached the radio with screws to the side supports and it is not
going anywhere. The wiring was easy to install there was alot left over but
I just secured it under the dash.I would use this product again.
2 out of 2 people found this helpful
Was this review helpful?    Yes | No
 
4 out of 5

For the 1997 Mercury Sable

Written By Troy, Kalamazoo, MI on Friday, April 10, 2009
Crutchfield Customer Review (What's this?)
 
It was a pretty straight-forward installation. Had some difficullty transferring some of the heat controls to the new unit. Also, and I'm not sure if this is due to the CD player I purchased but there wasn't enough depth inside the dash to get a secure fit so I had to improvise. I would recommend it to others though. The antenna and wiring harness extension make it well worth the price.

Troy C- Kalamazoo, Michigan
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
4 out of 5

Good kit, poor lighting

Written By Scott S., Phoenix, AZ on Thursday, April 02, 2009
Crutchfield Customer Review (What's this?)
 
I have never insalled an aftermarket cd player before, but with this kit it wasnt very hard. it took a long time, but that is cuz i didnt want to mess anything up. Crutchfield gives very clear instructions and most of the wires just need to be plugged in. i would give this kit a 5 star except for that at night time it looks dumb. the lights behind the a/c controls shine through the plastic and makes the whole lower half of the kit glow and it makes it look cheap. thats the only thing tho. everything is working perfectly on my a/c and my new kenwood 342u. and the price on it is great. you cant beat crutchfield prices OR customer service!
3 out of 3 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

made for anyone

Written By christopher, gulfport, ms on Friday, March 13, 2009
Crutchfield Customer Review (What's this?)
 
this was a very good kit it only took about 30 min to do i mean all u have to do is run wires to the trunk and hook them up and hide them anyone that has done car hook ups is good to go but people that this is there first time it might be hard for.
Was this review helpful?    Yes | No
 
4 out of 5

Worth buying

Written By Dave, Northern Illinois on Sunday, March 01, 2009
Crutchfield Customer Review (What's this?)
 
As always, Crutchfield does a thorough job of documentation with this product. It was fairly easy to follow the instructions included to remove the old dash piece and install the new. However, I will agree with a prior review that said that a rear mounting strap should be included. My CD player skips a lot more than it did in my last car and I think it's because of lack of support at the rear of the unit. Once the weather gets warmer here, I will install a strap to correct that.
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Excellent Product

Written By Daniel, Austin, TX on Monday, February 02, 2009
Crutchfield Customer Review (What's this?)
 
This was an excellent purchase for me! All of the heat, rear defrost, fan speed controls are you original ones (the guide walks you through accomplishing this). My aftermarket Sony fit just fine. Quite an eloquent look, for it looks just like the factory original! Granted, it was a lot of work to run the wiring harness from the rear tuner amplifier to the front to get the speakers and antenna to work, but was far worth it! You don't have to be a specialist to install this. You just need to be able to take your time and read, following each step. It took me about 4 hours from start to finish, however, I had it right the first time and everything works! Thanks Crutchfield!
Was this review helpful?    Yes | No
 
2 out of 5

Tough installation and Malfunction

Written By k3mbbc, Indiana on Saturday, January 24, 2009
Crutchfield Customer Review (What's this?)
 
I took my car to a local shop to have my stereo installed. They used this kit for my Ford Taurus to install it. They had to do some creative work behind the dash to get the kit and stereo to fit! Thank goodness he knew what he was doing.

Also, the Rear Defroster does not work. I'm going to have to return this kit and get another brand.
1 out of 2 people found this helpful
Was this review helpful?    Yes | No
 
3 out of 5

Scosche FD134030B Factory Integration Adapter

Written By Ed, Monroe, CT on Wednesday, January 21, 2009
Crutchfield Customer Review (What's this?)
 
I did not know that I would have to be an electrician to install this item. Making up electrical connections and removing HVAC controls and reinstalling them. Accidently pulled out one of the frail yellow wires for the lights on the HVAC controls when installing the radio. Yellow wires very flimsy, caution is needed when sliding in the radio. Make sure you have butt electrical connectors for the wire connections. Looks good but make sure you give yourself plenty of time when doing it.
1 out of 3 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Two Thumbs Up

Written By Brian, Pacific Northwest on Monday, November 24, 2008
Crutchfield Customer Review (What's this?)
 
excellent product, makes the installation look like a factory job.
It was a time consuming installation, about 3 hours, but well worth it.
Was this review helpful?    Yes | No
 
3 out of 5

Not as easy as it looks

Written By John, Boston, Ma on Friday, November 21, 2008
Crutchfield Customer Review (What's this?)
 
I got this because I have a great head that was in my old car that I wanted in my new used Sable. I was quite dissapointed at the amount of work that has to go into the wireing. I figured this would be like most installs and all I would have to do was wire an adapter to my heads wiring and plug it in to the existing wiring harness in the dash and just pop it back in. That's not the case, a lot of interior trim has to be pulled out to run the 20+' lines to the trunk. The plate itself is well made and looks pretty much OEM I used the metal frame tha came with my stereo to mount my radio and cut the trim ring to fit over that. It looks great. I haven't installed it yet I just poped the new plate in the dash to see how it all fit and it does look good I am just not up mto pulling the car apart in the cold and probably will get to it later. I have installed 100s of stereos in cars and this one so far has been the one that requiers the most work.
3 out of 4 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Scosche FD134030B Factory Integration Adapter

Written By Don, Ft.Lewis, Washington on Friday, October 31, 2008
Crutchfield Customer Review (What's this?)
 
I bought this replacement piece for my daughters Taurus. This is a quality piece of equipment and the fit was perfect. I would highly recommend it.
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
4 out of 5

Good Product

Written By Seabo, Jackson, NJ on Monday, October 20, 2008
Crutchfield Customer Review (What's this?)
 
This was a very good product. I thought it was a very easy install for a stange automobile design. I don't have an issue with the quality of the plastic as some other reviewers had.

I do however agree with many that the way the receiver mounts to the plastic is weak. Definately get a metal strap (if you don't have the one that came with your head unit) and mount it to the back of the radio and to the plastic piece. I can see how people were having their head units fall into the cavity. The plastic clips that hold the head unit on are pretty insufficient. Also the instructions could be a little more detailed.

Over all a very good product for a stange design.
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
4 out of 5

Indispensable

Written By Jim, Manassas, VA on Sunday, September 07, 2008
Crutchfield Customer Review (What's this?)
 
Good solution to a dumb design, and it worked well for me. The instructions could use some more detail. Removing the edging tape to pry open the bottom of the original dash insert to get at the clips holding one of the plugs was a bit hard to figure out and do properly, but we succeeded. It was unclear that methods A and B for mounting the receiver in the opening were 2 options, only the second of which worked with my unit. Be sure to seat all the plugs securely in the new kit.
Was this review helpful?    Yes | No
 
4 out of 5

Good solution for an odd dashboard

Written By Joseph, Clifton Springs, NY on Thursday, August 07, 2008
Crutchfield Customer Review (What's this?)
 
This is good solution to a badly designed car. I love the Sable but this dashboard and the wiring they use is abusive to installations. The new faceplate is sturdy, and works well with my stereo. If your stereo has the metal frame insert, you can do without the supplied plastic side clips. All the complaints I have read about the cheaply made defrost button, too bright backlights, etc seem petty compared to the ability to install your own stereo in this car. The only complaint I have is with the instructions.
I was able to remove the existing face-plate and stereo, get the knobs off and onto the new faceplate, the '99 wiring adapter went on easily as well. What needs clarifying is that there is a box in the trunk under the carpet that the last wiring harness plugs into. Once you find this it is clear that the 14' harness plugs in after removing one of the plugs. The antenna has to be removed from the same box and plugged into the harness. From here, it is a simple matter of removing the back seat, removing the plastic caps over the running boards on the driver side door frames, running the harness through the back seat frame (following the existing wiring path) under the carpet along the driver's side up to the front of the car, up under the dash and to the stereo compartment. Then it is a simple matter of splicing the appropriate wires to your stereo's harness. Don't forget to reassemble your back seat and replace the plastic rocker panel covers 8-).

6 out of 6 people found this helpful
Was this review helpful?    Yes | No
 
4 out of 5

Scosche FD134030B Factory Integration Adapter

Written By Patentpending, Olympia, WA on Thursday, June 05, 2008
Crutchfield Customer Review (What's this?)
 
I have had my 1999 Taurus for over a year, and I finally got around to
installing an aftermarket headunit(Dual XHD6425). The instructions included
in the kit were rather wishy-washy and didn't go into too much detail, but
pretty much anyone with a few hours and some basic tools/knowledge
would be able to do this install. It took me a little over 2.5 hours. In the
dark. A few problems I had were concerning the mounting of
the new receiver. There isn't much room so you will have to mount it with
the 2 black plastic pieces included in the Scosche kit. If your radio came
with a metal din mount, it probably won't work right. There are about 10-15
wires up front that need to be spliced to the harness that (should have)
come with your new headunit. As for the dash kit itself, it does have some
weaknesses. The lights shine right through the climate control knobs, and
the entire climate control area looks cheaply done. However you reuse the
climate control knobs and switches from your original stereo so you know
they won't fall apart immediately. The rear defrost switch is very cheap
looking and the light for it is way too bright. Everything appears to be fairly
solid and I didn't break anything in the install process. Overall I am pleased
with the looks and performance of this unit, but I think the build quality
could be better. With a few small changes this could be a superb product,
but even as it is, it's a good value and it does it's job well.
2 out of 2 people found this helpful
Was this review helpful?    Yes | No
 
2 out of 5

Scosche FD134030B Factory Integration Adapter

Written By Sean, Oklahoma City, OK on Tuesday, March 04, 2008
Crutchfield Customer Review (What's this?)
 
Crutchfield usually dispenses high-quality products. This is not one of them. Pressed from a single sheet of plastic, it is a little flimsy and looks a little cheap. It lets a ton of light through the climate control section of the panel, and the defroster button looks horrible.



The DIN-sized cutout was a smidge bigger than the DIN cage that came with my stereo. This, and the strange shape of the stuff on the back (because of the Taurus stuff) created a situation where I couldn't secure the cage properly. (Rest assured, this isn't my first rodeo.)



The directions were more-or-less well written and complete, and everything fit well otherwise. The felt tape around the panel's edge was a nice touch to help prevent dash squeaks.



After buying this and being unsatisfied, I went and bought another panel, which is better constructed and better looking. Using the wiring that came with the Scosche kit (which was a snap to install and run), I had a successful and good-looking install.



My recommendation for Crutchfield: drop this panel.
2 out of 3 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Better than expected

Written By Michael, Huntsville, AL on Tuesday, December 04, 2007
Crutchfield Customer Review (What's this?)
 
This was great except for the massive amount of wire to run from the trunk (that is not this company's fault - that belongs to Ford's design of the audio system placement). Works great and am very pleased with the finished result. Do prepare to spend some time to properly run this wiring assembly.
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
4 out of 5

Pretty good overall.

Written By David, WV on Monday, April 09, 2007
Crutchfield Customer Review (What's this?)
 
This is a pretty good kit when you consider the unusual design of the integrated radio and heater controls it is replacing. You definitely need to add a support for the radio you're installing, though. I tried it without any extra support and the radio fell back into the dash after a few weeks.
3 out of 3 people found this helpful
Was this review helpful?    Yes | No
 
3 out of 5

Scosche FD134030B Factory Integration Adapter

Written By Mike, Baltimore, MD on Monday, August 07, 2006
Crutchfield Customer Review (What's this?)
 
Okay, first let me say that I am not completely disapointed with this product. It did make the install of the unit easier. Everything installed perfectly and took about 1 hour. What I am disapointed about is the plastic brackets that hold the head unit in place. Very flimsy. I first time I installed the unit, I tried to install from the rear of the faceplate, because there were no gaps showing around the headunit. Looked pretty good that way, until I hit a bump and the head fell inside the dash. The plastic brackets have 2 sets of very weak clips that clip into the face plate. I had to remove the head unit and reinstall it through the front to get a stable install. I guess I will just have to deal with the gap around the head unit.

They could at least throw in a head unit support bracket just in case you don't have one. My Pioneer MP3800 did not come with one. Also, they could of made some type of support for brackets, maybe 2 screws to hold them to the face plate.
3 out of 3 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

What I've been waiting for!

Written By B. Parker, Pace, FL on Sunday, June 04, 2006
 
I have looked high and low for something like this since I bought the car back in 98 and there was a discount if you bought a deck from Crutchfield. Came with EVERYTHING that I needed for a quick and painless install. The Crutchfield instructions were easy to understand, This product is worth every penny!

2 out of 2 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Scosche FD134030B Factory Integration Adapter

Written By nickey, Ramstein, Germany on Thursday, May 18, 2006
Crutchfield Customer Review (What's this?)
 
This is the second time I've used cruthfield in the last year... They have once again delivered a great product. Easy to install, easy to use.
1 out of 2 people found this helpful
Was this review helpful?    Yes | No
 
3 out of 5

Good, but not Great

Written By Dave, Virginia Beach, VA on Sunday, February 05, 2006
 
The instructions leave a lot to be desired, you really have to think it through when using this product. Plus its not the prettiest thing to look at, however, if you want to install an aftermarket HU in your Taurus, this is the best (and probably only) way to go.
2 out of 2 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Unbeatable

Written By Phillip, Biloxi,MS on Saturday, November 12, 2005
Crutchfield Customer Review (What's this?)
 
Came with EVERYTHING that I needed for a quick and painless install. The Crutchfield instructions were easier to understand than the ones from the manufacturer.This product is worth every penny!
9 out of 9 people found this helpful
Was this review helpful?    Yes | No
 
4 out of 5

Great Alternative

Written By Justin, Concord, NC on Thursday, October 13, 2005
 
I recieved this item promptly, just as soon as UPS could get it here.
This is a great alternative to the stock face plate or a cd changer in the trunk. The instructions are pretty clear, just requires a little bit of thinking. Overall this is a great product...the only thing I would change about it is the plastic side pieces, they when connected to the mainplate are a little flimsy and need some coaxing.
7 out of 7 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Wearth the time

Written By James, Fort lauderdale, Fl. on Tuesday, March 22, 2005
Crutchfield Customer Review (What's this?)
 
When I say it is wearth the time ... I mean it is wearth the effort, money, and time you spend it this extremly valueable peace. If you are one of the tieard people who just wish you cold get more out of that factory radio (like I was) then please I begg you to invest in this. You will not regret it no matter what after market radio you put in you car. The instalation was easy and fast with somewhat no brainer instructions. MONEY WEARTH SPENT!
293 out of 410 people found this helpful
Was this review helpful?    Yes | No
 

For a more in-depth review and enhanced detailed information on the Scosche FD134030B Factory Integration Adapter, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_142F134030/Scosche-FD134030B-Factory-Integration-Adapter.html ).

Searches related to the Scosche FD134030B Factory Integration Adapter Allows you to install and connect a new car stereo to 1996-99 Ford Taurus and Mercury Sable models with the factory rotary climate controls