1.888.955.6000
 
 
1-888-955-6000
crutchfield.com
Crutchfield

Scosche HD7000B Factory Integration Adapter for Harley-Davidson

Fits select 2006-up Street Glide and 1998-up Road Glide models (single-DIN)

Zoom
  • Scosche HD7000B Factory Integration Adapter for Harley-Davidson

    Package pictured

  • Scosche HD7000B Factory Integration Adapter for Harley-Davidson

    Mounting kit

  • Scosche HD7000B Factory Integration Adapter for Harley-Davidson

 

Our take on the Scosche HD7000B Factory Integration Adapter for Harley-Davidson

by Jon Paulette
Scosche

Scosche HD7000B

This Scosche factory integration package allows you to install a single-DIN (2" tall) aftermarket stereo in select 2006-up Street Glide and 1998-up Road Glide models from Harley-Davidson. The package includes a mounting plate to trim out your new radio, along with a wiring harness that connects your new stereo to your bike's wiring. The harness will also connect to Scosche's SWI-RC steering wheel control module so you can maintain your factory handlebar audio controls.  Warranty: 60 days.

Note: Most vehicles will require additional installation parts — please identify your vehicle if you haven’t done so, then check here for a list of parts. You can also call an Advisor for more information.

 

Hands-on research from the Crutchfield Labs (what are the Labs?)

Product Research
What's in the box?

Download owner's manual

  • Radio housing
  • Wiring harness
  • 2 Brackets
  • 2 Spacers
  • 4 Machine screws
  • Self-adhesive foam gasket
  • Installation Instructions

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

Overview: The Scosche HD7000B, is an aftermarket stereo installation kit for 1996 and newer Harley Davidson touring motorcycles, including Road Glide models. For a seamless installation of an aftermarket head unit, the HD7000B will accommodate ISO side mounting. The kit mounts into the factory location using original factory hardware and also includes the wiring harness with a provision to retain handlebar controls with PAC's SWC interface (541SWIRC, sold separately). The front-panel and mounting brackets are constructed from automotive grade ASA plastic to withstand the elements. The mounting brackets include factory-style brass threaded inserts. The kit also includes stainless steel mounting screws to ensure durability. The kit includes a weather-resistant gasket for cleaner installation on certain apps and also includes small mounting spacers for Road glide installations.

Note: The Scosche HD7000B only offers front speakers connection; no rear speaker connection.
 
Review this product
Great Gear Giveaway rewards card

Submit a review and you will be entered to win a $150 gift card

Crutchfield Great Gear Giveaway Official Sweepstakes Rules

Scosche HD7000B Factory Integration Adapter for Harley-Davidson Reviews

Average Customer Review:

7 people say:

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left
Filter by rating:
5 out of 5

Best product for the $$$$

Written By Bob, WV on Friday, April 11, 2014
Crutchfield Customer Review (What's this?)
 
Installation was pretty simple. I have the Strong Arm fairing mounts, so it was a little tight (mounts had to be unbolted at top). This is definitely the best product I could find for the money. Similar products marketed to Harley owners are way overpriced.
Pros:
Easy install. Priced right.
Cons:
Let you know if there are any in 1000 miles.
Was this review helpful?    Yes | No
 
1 out of 5

Even at 50% off, not worth it.

Written By DK, Los Angeles on Monday, April 07, 2014
Crutchfield Customer Review (What's this?)
 
Terrible fit. There is no way explained to actually HOLD the head unit in between the two side pieces they supply. You are supposed to use their 4 supplied screws to attach each side piece to the front bezel, ok I get that. Then use the factory 4 screws from your old Harley radio to attach those sides to the stock mounting holes in the Harley cage (inside the fairing), ok got that too... but apparently the head unit is supposed to just magically hover there between the rails????? Come on! There are two holes on each side that line up with screw holes on my aftermarket head unit, but there were no screws supplied or ANY mention about that in the manual. In fact, the manual says to remove and NOT USE the factory cage (that HOLDS the head unit up!!).

The opening of the front plastic bezel is too small to insert the factory cage, yet a little too large to have a good fit around the head unit inserted from the back (if you could support it somehow). It wouldn't work with the Kenwood trim ring around the stereo either... so you have this ugly black plastic thing that makes your face plate not sit correctly... come on!

I bagged it all up and got my RMA online.
Pros:
Includes with a cheap Harley harness adapter ready made for the PAC SWI-RC steering wheel controller (sold separately). So you don't have to try and screw with resistors or cut wires (Oh wait - except you still have to cut a pink wire on your harness and ground it -- heck no!)
Cons:
Terrible instructions, cheap plastic front bezel, doesn't look good, nor fit correctly, can't use aftermarket cages that come with your new stereo (you know the sleeve designed to hold your head unit in place? Yeah, you CAN'T use them). No splash guard available. Stay away from these cheapos, get a kit with metal shelf that allows you to use the cage, inserted from the front, then secured from the back, so you can mount your head unit properly.
Was this review helpful?    Yes | No
 
4 out of 5

Scosche HD7000B Factory Integration Adapter for Harley-Davidson

Written By Anonymous, Eaton,IN on Thursday, January 16, 2014
Crutchfield Customer Review (What's this?)
 
It works good in my Electra Glide...
Was this review helpful?    Yes | No
 
5 out of 5

Scosche HD7000B Factory Integration Adapter for Harley-Davidson

Written By Mike, Arlington TX on Saturday, September 21, 2013
Crutchfield Customer Review (What's this?)
 
Great product for adding aftermarket radio in a Harley Roadglide. I will recommend this product to my friends and customers.
Was this review helpful?    Yes | No
 
5 out of 5

Scosche install kit

Written By Philthy, Tempe Az on Thursday, August 29, 2013
Crutchfield Customer Review (What's this?)
 
Easy install, had to modify to fit my stereo, but still easy. Would buy this again way before hog tunes and others.
Pros:
Designed to fit Harley's
Cons:
Didn't fit for my Kenwood, but was easy to shave it and make it work.
Was this review helpful?    Yes | No
 
1 out of 5

Fits but....

Written By Tom K, detroit michigan on Friday, June 28, 2013
Crutchfield Customer Review (What's this?)
 
Fits and looks clean. Harness limits your choice of steering wheel control unit to one model.
Pros:
clean look
Cons:
1. needs a splash shield at this price point 2. Harness is only for 98 up bikes 3. Needs to be available alone no harness 4. Needs a splash shield either with it or an option Would not buy again
Was this review helpful?    Yes | No
 
3 out of 5

clean look... but poor harness

Written By Allen, Fort Worth on Tuesday, June 25, 2013
 
Makes for a nice clean install on my Alpine for my Harley... but the wiring harness seems poorly constructed. Connections are crimped, not soldered. I am having trouble with the built in connector for the SWI-RC controller for the handlebar controls. Volume up and down are erratic. PAC-Audio (makers of the SWI-RC) technical support told me they are having problems with users attempting to use this kit and instructed me to make my own harness following the diagrams on their site.
Pros:
Looks great installed!
Cons:
Poor harness may be the cause of erratic handle bar controls!
Was this review helpful?    Yes | No
 

1 question already asked

Will the adapter fit my 2014 street glide? [ Ray  Jan 11, 2014 ]
1 answer
  • You will want to contact an Advisor by phone or online chat to discuss compatibility with your factory system. They will be able to pull up your vehicle and see if this will integrate. If it does not, then they will also be able to discuss other options with you. [ Jeff Staff  Jan 12, 2014 ]

For a more in-depth review and enhanced detailed information on the Scosche HD7000B Factory Integration Adapter for Harley-Davidson, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_142HD7000B/Scosche-HD7000B-Factory-Integration-Adapter-for-Harley-Davidson.html ).

Get live, personalized service from an expert

Crutchfield Advisor: Hi there.

Crutchfield Advisor: We're happy to answer questions or provide additional info about this item.

Advisors also available at 1-888-600-3963

Searches related to the Scosche HD7000B Factory Integration Adapter for Harley-Davidson Fits select 2006-up Street Glide and 1998-up Road Glide models (single-DIN)