About the EFX 10-gauge Amplifier Wiring Kit
This wiring kit does not include speaker wire, so you'll need to purchase that separately to complete your amp installation. This kit includes patch cables for a 2-channel or mono amp — you'll need to add cables for multi-channel amps.
Make sure you enjoy the full potential of your new amplifier by hooking it up with quality power and signal connections.
This wiring kit from EFX includes 10-gauge power and ground cables, a stereo RCA audio cable, and all the accessories you'll need to connect your new amp. Just add whatever speaker wire you need, and you're ready to go. Designed for amplifiers with a fuse rating of up to 30 amperes.
Product highlights:
- amplifier wiring kit with power, ground, and audio connections
- 17-foot blue 10-gauge power cable
- 4-foot silver 10-gauge ground cable
- 17-foot blue remote turn-on lead
- 17-foot twisted pair patch cable with EFX-2 RCA connectors
- 30-amp ATC blade fuse and in-line fuse holder
- 6 feet of flex loom
- assorted crimp-on connectors and wire ties
- warranty: 1 year (no warranty on fuses)
- MFR # 142PA10
What's in the box:
EFX 10-gauge Amplifier Wiring Kit owner's manual
- 17' Stereo RCA interconnect cable
- 17' Ten-gauge blue power cable with in-line fuse holder and ring terminal on end near fuse holder
- 30 amp ATC (blade) fuse
- 4' Ten-gauge silver ground cable with ring terminal on one end
- 17' Eighteen-gauge blue remote turn-on wire
- 6' Length of flex loom
- 6 Plastic wire ties
- Red 10-gauge crimp-on ring terminal
- 2 Red 18-gauge crimp-on spade connector
- 1 Plastic grommet
- 1 Red butt connector
- "Scosche" sticker
- Instructions
Customer reviews for EFX 10-gauge Amplifier Wiring Kit
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the EFX 10-gauge Amplifier Wiring Kit
Product Research
Features
Compatibility: The PA10 kit is designed for amplifiers with fuse ratings up to 30 amps.
Kit Contents:
- 17-ft Stereo RCA interconnect cable
- Waterproof in-line fuse holder with 10-gauge power cable attached (width: 1.135", height: 1.365", depth: 0.522")
- 30-amp ATC fuse
- 17-ft 10-gauge blue power cable, with fuse holder in-line and a ring terminal on the same end as the fuse holder (0.551" outer diameter, 0.315" inner diameter)
- 4-ft 10-gauge silver ground cable with ring terminal on one end (0.551" outer diameter, 0.315" inner diameter)
- 17-ft 18-gauge blue remote turn-on wire
- 6-ft length of flex loom (0.40" diameter)
- 6 Plastic wire ties (zip ties, 3-7/8" long)
- 10-gauge crimp-on ring terminal with a red insulator boot (0.551" outer diameter, 0.315" inner diameter)
- Two 18-gauge crimp-on spade connector with red insulator boots (0.262" outer width, 0.166" inner width)
- 1 Plastic grommet
- 1 Red butt connector
- Scosche sticker
- Instructions
Note: All power cables have Oxygen-free high-conductivity wire for maximum power flow.
The EFX 10-gauge Amplifier Wiring Kit replaces these items
EFX 10-Gauge Amplifier Wiring Kit
- 10-gauge power and ground cables
- turn-on lead
- 17-foot stereo RCA patch cable
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
I gave this five stars because the kit comes with everything needed to hookup a powered subwoofer in my car.They are more than capable for handling the power needed and stay cool during operation. The cabels are very pliable and long .Plus they are cool looking .
R S from Cedar Lake In.