by Crutchfield's Ken Nail

Make sure you enjoy the full potential of your new amplifier by hooking it up with quality power and signal connections.

KEEP READING

This wiring kit does not include speaker wire, so you'll need to purchase that separately to complete your amp installation. This kit includes patch cables for a 2-channel or mono amp — you'll need to add cables for multi-channel amps.

Make sure you enjoy the full potential of your new amplifier by hooking it up with quality power and signal connections.

This wiring kit from EFX includes 4-gauge power and ground cables, 17' Stereo RCA interconnect cable, space-saving mini wafer fuse holder and fuse, and all the accessories you'll need to connect your new amp. Just add whatever speaker wire you need, and you're ready to go. Designed for amplifiers with a fuse rating of up to 100 amperes.

READ LESS

Product highlights:

amplifier wiring kit with power, ground, and audio connections
17-foot blue 4-gauge power cable
4-foot silver 4-gauge ground cable
17-foot blue remote turn-on lead
17' Stereo RCA interconnect cable
100-amp mini wafer in-line fuse and fuse holder
6 feet of flex loom
assorted crimp-on connectors and wire ties
warranty: 1 year (no warranty on fuses)
MFR # 142PA41

What's in the box:

EFX 4-gauge Amplifier Wiring Kit owner's manual

17' Stereo RCA interconnect cable
16' Four-gauge blue power cable (installed on amp side of fuse holder)
1' Four-gauge blue power cable with ring terminal (installed on battery side of fuse holder)
Waterproof in-line fuse holder
100-amp AFS mini wafer fuse
2 Mounting screws (for the in-line fuse holder)
4' Four-gauge silver ground cable with ring terminal on one end
17' Eighteen-gauge blue remote turn-on wire
6' Length of flex loom
6 Plastic wire ties
Two 4-gauge crimp-on spade connectors (one red/one black)
2 Red 18-gauge crimp-on spade connectors
1 Plastic grommet
2 Red butt connectors
"Scosche" sticker
Instructions

Loading reviews...

Average review:

75 reviews

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Filter by rating

filterStar

Customer photos

Customer provided image, click to load a larger version.

Verified customer

Verified employee review

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Have questions for

Crutchfield response

Was this helpful?

<< >>

Researched by Crutchfield's Mark G.

The EFX 4-gauge Amplifier Wiring Kit replaces these items:

Product Research

Features

Compatibility: The PA41 kit is designed for amplifiers with fuse ratings up to 100 amps.

Kit Contents:

17-ft Stereo RCA interconnect cable
Waterproof in-line fuse holder with 4-gauge power cable attached (width: 3.230", height: 1.082", depth: 1.959")
100-amp AFS mini wafer fuse
1-ft 4-gauge blue power cable, one end attached to fuse holder, the other end has a ring terminal (0.655" outer diameter, 0.315" inner diameter)
16-ft 4-gauge blue power cable, one end attached to fuse holder
4-ft 4-gauge silver ground cable with ring terminal on one end (0.655" outer diameter, 0.315" inner diameter)
17-ft 18-gauge blue remote turn-on wire
6-ft length of flex loom (0.561" diameter)
6 Plastic wire ties (zip ties, 7-3/4" long)
Two 4-gauge crimp-on spade connectors, one with a red insulator boot for power and one with a black insulator boot for ground (0.367" outer width, 0.216" inner width)
Two 18-gauge crimp-on spade connector with red insulator boots (0.257" outer width, 0.168" inner width)
1 Plastic grommet
2 Red butt connector
Two 1/2" Mounting screws for the waterproof in-line fuse holder
Scosche sticker
Instructions