Skip Navigation

Scosche SAC653 Speaker Mounting Brackets

Install 5-1/4" or 6-1/2" speakers in select 1995-up Dodge Neon vehicles

Item #: 142SAC653

In Stock

11 Reviews | Ask Questions

Add to Cart

+ Add to wishlist + Email me alerts for this product

View all associated offers

Does it fit my car?

Select your car

Find what fits your car

Can't find your exact car?

Scosche SAC653

Scosche's SAC653 brackets will allow you to install select 5-1/4" or 6-1/2" speakers in the factory speaker openings of select 1995-up Dodge Neon vehicles. Please enter your vehicle information or call an Advisor at 1-888-955-6000 to confirm that these adapters are compatible with your vehicle. Warranty: 60 days.

Scosche SAC653 Speaker Mounting Brackets Reviews

Average Customer Review:

11 Reviews

Scosche SAC653 Speaker Mounting Brackets

Written by: Anonymous from California on May 25, 2015

2006 Nissan Xterra
Crutchfield Customer Review (What's this?)

Got these to install Kicker's in rear door of Xterra. Only needed to drill one hole and the speakers went in nicely. Fits perfectly behind the factory door panel.



Factory ungrade

Written by: JD from Webster, NY on April 26, 2015

2000 Chevrolet Camaro
Crutchfield Customer Review (What's this?)

Required to install Infinity Primus PR5002is rear panel speakers into a 2000 Chevy Camaro Convertible. They worked as designed placing the speaker at the desired location (depth). Could not install the speakers with out bracket.

Pros: Worked as designed

Cons: Instructions could be better.

didn't give enough depth

Written by: craigc from California on January 5, 2015

2010 Volkswagen Golf
Crutchfield Customer Review (What's this?)

I had to trim the piece to fit and find that the depth was inadequate for the location of the speakers. After some adjustments to placement, I settled with something less desired but I was able to use these to get the speakers in place.



Works, but not a direct replacement

Written by: Chip from Browns Mills, NJ on September 13, 2014

2005 Nissan Xterra
Crutchfield Customer Review (What's this?)

For the Nissan Xterra rear speakers, this bracket does not quite fit exactly. With some effort, you can get a decent fit for the speaker in the hole lining up 2 of the existing holes and drilling one new. Use care when routing the wire, as the factory speaker wires plug in outside of the door panel, while the replacements will need to be fed into the door panel. Overall, still not a difficult installation.

Pros: Works.

Cons: Correct fit would be much better.

Scosche SAC653 Speaker Mounting Brackets

Written by: FishingDude from Texas on June 27, 2014

2010 Nissan Xterra
Crutchfield Customer Review (What's this?)

Let's not kid ourselves. These aren't some crazy difficult product to make and use. They're speaker brackets, and they excel at being speaker brackets. Took about 10 minutes to install the pair and they seem to be holding up very well since the install. So far no distortion noises from my speakers. Definitely a must have for xterra owners looking to replace their speaker system.

Pros: Easy install. Sturdy construction.

Cons: None so far.

Performed to expectations

Written by: TMHNBK from Northbrook, IL on July 24, 2013

2011 Suzuki Kizashi
Crutchfield Customer Review (What's this?)

These brackets did what they were supposed to do, just as expected.

Pros: Easily adapted to the installation requirements of my doors.

Cons: None

Didn't quite fit the speakers they were intended for

Written by: rhutch from Pasadena, CA on July 24, 2013

2007 Nissan Xterra
Crutchfield Customer Review (What's this?)

Crutchfield sent these to accompany the Sony XS-GT1638F, but when I tried to put the speakers into these, they didn't quite fit. A little heavy pushing and one of the mounting tabs on those particular speakers would bend up enough to sit solidly into these mounting brackets. Not a problem for me, just thought I'd point that out.



Life made simple!!

Written by: johnny from Isabela Puerto Rico on July 9, 2013

2002 Toyota Echo
Crutchfield Customer Review (What's this?)

These mounting brackets made the task of replacing the old factory speakers with the new 6 1/2's supplied by Crutchfield a snap. I spent more time placing back the factory panels than the time spent installing the new speakers. Thanks so much for supplying these FREE brackets, you guys are awesome!!

Pros: a win win situation!!

Cons: none


Written by: duke from columbus, oh on December 19, 2012

Crutchfield Customer Review (What's this?)

as stated in the other reviews these do not fit without some alterations. (2nd gen xterra, non rockford fosgate) kept them only bc they came "free" with the speakers i ordered.



Drill, Drill, Drill............

Written by: Tanker from NY on June 4, 2011

2008 Nissan Xterra
Crutchfield Customer Review (What's this?)

Fits but after much drilling. Does not mount in factory holes and does not come with a template. You need to center the bracket and make sure that the holes have metal underneath to drill into. Speakers need 4 holes too for the not so self tapping screws. They should make one that fits better or warn that it's not a direct fit.



fits, but not so good

Written by: lunchtime from arctic tundra on May 1, 2011

2011 Nissan Xterra
Crutchfield Customer Review (What's this?)

these came with my order of speakers for a 2011 nissan xterra, and at first i was very pleased, however when i went to screw the assembly to the door panel, i found that the tabs with the screw holes did not line up very well. i was able to get them screwed in, but it came at the cost of having to put the screws in at an angle and was not very sturdy :( i decided to return them because i am concerned my speakers may eventually fall out of the door panel after hitting miles and miles of bumps and potholes. these are listed as being intended for a different vehicle, and it seems pretty obvious why. i think a vehicle specific one should be molded to mate up to the holes better in the xterra.



Hands-on research

What's in the box?

Download owner's manual

  • Two speaker adapter brackets

Product Research


Overview: The SAC653 bracket is designed to allow easy replacement of the factory speakers with select aftermarket 6-1/2 and 5-1/4 speakers. (Please refer to the Crutchfield Vehicle Selector to confirm fit in your vehicle.)

6-1/2 Speakers: 6-1/2 speakers with the 3-hole or 4-hole bolt pattern can be mounted using the multiple openings around the perimeter of this bracket (if the hole spacing matches).

5-1/4 Speakers: The frame diameter of a some 5-1/4s is smaller than the bracket's cutout; in these cases a speaker baffle should be used to seal the rear of the speaker.


  • Cutout Diameter: 5.093"
  • Height: 0.56"
  • Three-Hole Spacing (6-1/2): 4.625"-4.82"
  • Four-Hole Spacing (6-1/2 or 5-1/4):
    • Perimeter: 3.78"-3.95"
    • Diagonal: 5.325"-5.565"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Customer Q&A

Searches related to the Scosche SAC653 Speaker Mounting Brackets Install 5-1/4" or 6-1/2" speakers in select 1995-up Dodge Neon vehicles