Skip Navigation

Harley-Davidson Speaker Mounting Brackets

Allows you to install 6-3/4" speakers in select 1996-up Harley-Davidson motorcycles

8 Reviews

Item #: 142SAHD656

In Stock

Add to Cart

Ask an expert

Our VA-based experts can help.

1.888.955.6000

ChatEmail

Add to Cart

Harley-Davidson Speaker Mounting Brackets

Overview

Our take on the Harley-Davidson Speaker Mounting Brackets

Nothing sounds quite like a Harley, but that doesn't mean you don't want quality audio when you're on the road. Now you can install standard 6-3/4" aftermarket speakers on select Harley-Davidson motorcycles. These mounting brackets are designed to fit all models equipped with a factory fairing, including the Road Glide.

Nothing sounds quite like a Harley, but that doesn't mean you don't want quality audio when you're on the road. Now you can install standard 6-3/4" aftermarket speakers on select Harley-Davidson motorcycles. These mounting brackets are designed to fit all models equipped with a factory fairing, including the Road Glide.

Sold in pairs, these adapters are made from sturdy ABS plastic. Stainless steel mounting hardware and detailed instructions are included. Warranty: 60 days.

What's in the Box:

  • 2 Speaker brackets
  • 2 Gaskets
  • Six 1" Stainless steel self-tapping screws (for mounting brackets-not speakers)
  • Instructions
Reviews

Harley-Davidson Speaker Mounting Brackets Reviews

Average Customer Review:

8 Reviews

adapters

Written by: adapters from Florida on December 31, 2015

Crutchfield Customer Review (What's this?)

I had these and Hog Tune adapters on hand during installation of my Kappa speakers. For my road glide these fit much better then the HT adapters

Pros: Fitment was perfect

Cons: None

Fit

Written by: Stoop from Butler pa on August 11, 2015

Crutchfield Customer Review (What's this?)

Instruction need clarification but all gd

Pros: All good

Cons: None

Harley FLHT

Written by: Geoff from Callahan, Fl on October 3, 2014

Crutchfield Customer Review (What's this?)

Only thing I have ever received from Crutchfield I was unhappy with

Pros: Non really

Cons: Did not fit well at all, was so bad I purchased another set, which fit perfect...

Not exact fit...

Written by: David from Montgomery, AL on July 9, 2014

2006 Harley Davidson Street Glide
Crutchfield Customer Review (What's this?)

They fit perfect into the Harley but the speaker rings were slightly larger then my Polk speakers... Had to make my own holes because speakers and ring holes didn't line up, was able to get three screws in them. Sound comes thru just fine, and for free you can't really complain!

Pros: Did the job. Free!!

Cons: Had to modify to fit speakers...

Big Sound - Small Investment

Written by: Machinegun Joe from Milwaukee, WI, USA. Earth on May 20, 2014

Crutchfield Customer Review (What's this?)

Easy to install with Crutchfield's great instructions. I went from stock 4" to booming 6 1/2" WHAT A DIFFERENCE ! I used Polk Audio speakers and they ROCK

Pros: Easy and quick installation, great price

Cons: Too bad they don't make a 12" version...........LOL

Road glide speaker brackets

Written by: Derek from Freetown ma on May 14, 2014

Crutchfield Customer Review (What's this?)

These brackets do work, however they only allow two screws on the Polk 6 1/2" speakers I was told they would mount just fine.

Pros: Cheap and lightweight

Cons: Not as secure as I would like

Harley-Davidson 6.5" Speaker Mounting Brackets

Written by: REDEAGLE from CAROL STREAM, IL on August 9, 2013

Crutchfield Customer Review (What's this?)

THE MOUNTS HOLD FIRM AND ARE EASY TO INSTALL. JUST ALIGN THE HOLES AND SCREW IT IN WITH THE SPEAKER.

Pros: EASY TO INSTALL

Cons: NONE THAT I CAN THINK OF

Fits but....

Written by: Tom K from detroit michigan on June 28, 2013

Crutchfield Customer Review (What's this?)

They need to relook at design and do specific right and left molds. Mount is too thin in important areas. I would not buy these again as other brands are around that do not have the two negative traits listed and are actually much cheaper

Pros: they fit and allow fairing support bracket to fit

Cons: the universal right and left design leaves 3 way speakers mid range and tweeters in different planes when mounted rings need more thickness around speaker mounting holes the are way too thin

Details

Hands-on research

What's in the box?

Download the Harley-Davidson Speaker Mounting Brackets manual

  • 2 Speaker brackets
  • 2 Gaskets
  • Six 1" Stainless steel self-tapping screws (for mounting brackets-not speakers)
  • Instructions

Product Research

Features

Overview: The SAHD656 is compatible with select Harley Davidson models with factory fairing speakers. (As of April 2013 this includes the 2006-2013 FLHX Street Glide, 1996-2013 FLHT Electra Glide, and 1998 and later FLTR Road Glide models.) The bracket is designed to allow replacement of the factory speakers with select aftermarket 6-3/4 speakers. (Please refer to the Crutchfield Vehicle Selector to confirm fit.)

Mounting: The aftermarket speakers bottom mount to this bracket. The diagonal screw hole measurement on the speakers should be in the 6.14" to 6.2" range.

Dimensions: The height (thickness) of the bracket is 1.081" and the opening where the speaker mounts is 5.735" in diameter.

Screw Hole Spacing:

  • Perimeter: 4.344"
  • Diagonal: 6.18"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Library

Searches related to the Harley-Davidson Speaker Mounting Brackets Allows you to install 6-3/4" speakers in select 1996-up Harley-Davidson motorcycles