Scosche SAT6 Speaker Mounting Brackets

Install 5-1/4" or 6-1/2" speakers in select 1999-up vehicles

Item #: 142SAT6

In Stock

94 Reviews | 1 question - 1 answer

Your price: $11.99 Earn up to 12 Rewards points

Add to Cart

+ Add to wishlist + Email me alerts for this product

View all associated offers

1.888.955.6000

Email

Chat

Does it fit my car?

Select your car

Find what fits your car

Loading...

Scosche SAT6

Scosche's SAT6 brackets will allow you to install select 5-1/4" or 6-1/2" speakers in the factory speaker openings of select 1999-up vehicles. Please enter your vehicle information or call an Advisor at 1-888-955-6000 to confirm that these adapters are compatible with your vehicle. Warranty: 60 days.

Important Note: Some 6-1/2" speakers use a larger frame and require a larger cutout. We call these 6-3/4" speakers, and they won't fit in this bracket. This bracket will only work with speakers that require a cutout diameter of 5-1/8" or less.

Note: Most vehicles will require additional installation parts — please identify your vehicle if you haven’t done so, then check here for a list of parts. You can also call an Advisor for more information.

Hands-on research

What's in the box?

Download owner's manual

  • 2 Speaker adapter brackets
  • Eight 15mm Elevator bolts
  • 8 Small flat washers
  • 8 Nuts
  • Eight 3/4" Self-tapping screws
  • 6 Large flat washers
  • 8 Speed clips
  • Instructions

Product Research

Features

Overview: As of 11/6/13, the SAT6 is compatible with select 1999-2013 vehicles from various manufacturers. The bracket is designed to allow easy replacement of the factory speakers with select aftermarket 5-1/4 and 6-1/2 speakers. (Please refer to the Crutchfield Vehicle Selector to confirm fit in your vehicle.)

5-1/4 Speakers: While a 5-1/4 speaker will mount easily in this bracket given the bolt pattern, the frame of many 5-1/4s is smaller than the opening in the bracket, possibly making a 6-1/2 a better fit. When using a 5-1/4, a speaker baffle might also be needed to seal the rear of the speaker.

Dimensions:

  • Outer Diameter: 6.03" (not including the flange)
  • Inner Diameter: 5.1"
  • Height: 1"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Scosche SAT6 Speaker Mounting Brackets Reviews

Average Customer Review:

94 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

(0)
(0)
(0)
(0)
(0)

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

brackets

Written By rspeedvdub, ferrum va on Sunday, October 12, 2014

Crutchfield Customer Review (What's this?)

Easy installation

Pros: Easy installation

Cons: None

Didn't fit 2013 Ford Explorer and Infinity Primus 6502is

Written By DW, Plano, TX on Tuesday, September 23, 2014

Crutchfield Customer Review (What's this?)

These really didn't work at all with the Infinity Primus 6502is speakers in a 2013 Ford Explorer. The speaker mounting tabs were of a larger bolt circle than the adapter bracket had. I had to located an adapter flange at my local hardware store, and with some modification got it to fit both the speaker and the adapter. Also, the mounting tabs on the adapter didn't fit the stock holes in the Ford, so I had to drill a hole in the door to get 3 mount points. Actually a little disappointed, first time after many purchases from Crutchfield that something they supplied didn't fit. Unfortunately, there wasn't a better solution offered by Crutchfield.

Pros: not many,

Cons: didn't fit my speaker and car

Perfect fit

Written By kansay, Brooklyn Center, MN on Wednesday, September 17, 2014

Crutchfield Customer Review (What's this?)

Item fits perfectly without any modification.

Pros: quick and easy install

Cons: none

Scosche SAT6 Speaker Mounting Brackets

Written By RIck, Jackson, Tn. on Saturday, August 30, 2014

Crutchfield Customer Review (What's this?)

good product, shipped fast, saved money

Pros: good product, shipped fast, saved money

Cons: NA

Didn't work for my application

Written By ShaunA, New Port Richey, fL on Thursday, August 28, 2014

Crutchfield Customer Review (What's this?)

Ordered these by themselves separate from any speakers to aid in installation in our Mercedes C240. The factory speakers were built in to a special OEM enclosure that brought the speaker farther forward to meet the door panel and had a foam surround incorporated to help channel the sound waves into the cabin. These brackets set to far back and some sound would have been lost behind the door panel. I was replacing blown speakers so I cannibalized the factory enclosure and basket and remounted the new speakers in that enclosure for a better fit and sound channeling.

Pros: None for my application

Cons: See review.

Speaker brackets for 08 Tacoma

Written By RaderDave, Santa Barbara, CA on Sunday, June 15, 2014

Crutchfield Customer Review (What's this?)

Bracket Holes do not line up for my vehicle ( 2008 Toyota Tacoma rear door speakers).

Pros: I was able to work with them but needed to to make my own simple modifications.

Cons: Mounting holes don't match up properly and the plastic will crack if your not careful. I needed to drill the third hole for mounting and holes for speaker wires to feed wires to the speakers....Three Stars

Great Adapter

Written By Emmmett, Raleigh, NC on Wednesday, April 23, 2014

Crutchfield Customer Review (What's this?)

Fit perfectly, made the installation a snap.

A must have for installs

Written By Islandyodasports, Altus, OK on Monday, March 24, 2014

Crutchfield Customer Review (What's this?)

Great product. Wish I had these in the 80s. Makes for a clean great install.

Pros: Install like a pro.

Cons: None.

Upgrade made simple

Written By Joe, Austin, tx on Sunday, March 23, 2014

Crutchfield Customer Review (What's this?)

Wanted to surprise the wife with a speaker upgrade in her 10 year old Lexus. When i researched the install, i came across these mounting brackets. They made short work of the install and made me look like a pro to the wife.

Pros: Inexpensive, direct fit, made install easy.

Cons: None

SCION TC REAR SPEAKER BRACKETS.

Written By Lena R., Austin,Tx on Saturday, March 22, 2014

Crutchfield Customer Review (What's this?)

I bought these brackets for my 2007 Scion Tc they were installed in the back. I bought the kicker 40cs654 and they fit great. my brother had to cut a piece but it was so simple. Thanks Crutchfield.

Pros: everything

Cons: none

Speaker Mounting Brackets

Written By Anonymous, la cal on Friday, March 21, 2014

Crutchfield Customer Review (What's this?)

works perfectly

Pros: simple

Cons: none

It Works

Written By Troy D., Roscoe IL on Saturday, March 08, 2014

Crutchfield Customer Review (What's this?)

Cool that these are available. Save custom fab. time.

Did Not fit

Written By Mike, Colorado on Friday, February 28, 2014

Crutchfield Customer Review (What's this?)

Didnt fit my 6.5 inch speakers wasted money

Pros: None

Cons: Did not fit 6.5 inch speakers and screw holes did not match tacoma

Thanks Crutchfield

Written By Ryan W., Sand Springs, OK. on Sunday, February 23, 2014

Crutchfield Customer Review (What's this?)

I think that its amazing that Crutchfield will send you everything you need for free to make your install as simple as possible! THANK YOU!

Pros: Easy to install

Cons: NONE!

Great bracket

Written By BigSHug825, Manassas, va on Friday, February 07, 2014

Crutchfield Customer Review (What's this?)

Crutchfield provided these with speakers. They were easy to fit to the speaker, came with the necessary screws, and were easy to install. I had some worry that they would crack if put under too much pressure, but those fears proved to be unfounded. The extra tabs were easy to break off when not needed.

Pros: Easy to install. Not brittle. fit my car and speaker.

Cons: None.

Great part

Written By Ashley, Savannah Ga on Tuesday, December 24, 2013

Crutchfield Customer Review (What's this?)

Part worked great in my 2007 Tundra!

Pros: Fits

Cons: None

Not so much

Written By Chris L, Richmond VA on Tuesday, December 17, 2013

Crutchfield Customer Review (What's this?)

Did they work - yes, did they work well-far from it. This is for the 6x9' Toyota to 6.5" adaptors.

The build of the brackets is so flimsy that it doesn't seal around the outer edges as it should. Even with foam stripping the plastic frame bent badly. It also did not meet up to the factory hole on one side to seal up as needed. After pulling the door panel a few times I finally spent a couple of hours modifying the factory speaker frame and this bracket to make a unit that worked well. Without this I would've had to build one from scratch so it was helpful but far from the correct piece needed for a quality install.

Pros: Crutchfield is awesome as always. served the purpose of fitting the speaker

Cons: low quality-mass build feel with subpar results.

They work, but...

Written By Jay, Crozet, VA on Friday, November 22, 2013

Crutchfield Customer Review (What's this?)

I called the help line because the way these mounting brackets work wasn't apparent to me. You have to force the screws into the sides of the bracket. The screws provided weren't long enough do successfully accomplish this, so I used slightly longer screws of my own. Once everything was mounted and secure, they worked fine.

Pros: Adaptable to the car doors as needed.

Cons: Hardware provided wasn't useful.

Speaker Brackets

Written By Anonymous, Blossvale, NY on Sunday, October 27, 2013

Crutchfield Customer Review (What's this?)

Worked great to replace my factory speakers.

Pros: Adjustable

Speaker Mounting Brackets

Written By RonM, Pittsburgh on Wednesday, October 23, 2013

Crutchfield Customer Review (What's this?)

These came free with the purchase of my speakers and Installation was a snap, you can't beat that.

Pros: Free with speaker purchase and easy installation.

Cons: None

Scosche SAT6 Speaker Mounting Brackets

Written By Javier C, Carolina, PR on Thursday, October 03, 2013

Crutchfield Customer Review (What's this?)

Easy installation.

Lots of work

Written By Andy, Huntsville, AL on Friday, September 06, 2013

Crutchfield Customer Review (What's this?)

Lots more work than advertised. Did not fit my 2008 Hyundai Elantra very well at all. I wound up having to trim these brackets, and then match drill new holes in both the brackets and the car door.

Pros: Eventually they did fit

Cons: I had to make them fit much more than i expected

Makes install easy

Written By Zaphod, Sacramento. CA on Monday, September 02, 2013

Crutchfield Customer Review (What's this?)

You can pay more for adapters, but why? These fit as well and only required some sealer around the edges to make it solid.

Pros: Easy to install.

Cons: None

Perfect

Written By MichaelG, Columbus, OH on Tuesday, August 27, 2013

Crutchfield Customer Review (What's this?)

Perfect for my needs. Thanks for the suggestion.

Scosche SAT6 Speaker Mounting Brackets

Written By Anonymous, milwaukee wi on Wednesday, August 14, 2013

Crutchfield Customer Review (What's this?)

worked great to install the new speakers i got

Speaker Mounting Brackets

Written By YZayas, Isabela, PR on Wednesday, July 31, 2013

Crutchfield Customer Review (What's this?)

Can't beat the fact that they were included for free with the speaker purchase. Installer used them without issues.

Pros: FREE

Cons: None

Tacoma Access Door speaker plates

Written By Mh, Derry, NH on Sunday, July 14, 2013

Crutchfield Customer Review (What's this?)

These are so below par for a Crutchfield purchase. The speakers do not fit correctly, and the plates do not fit the door. This is the first time I regret buying a Crutchfield product. Two thumbs down!

Pros: Nothing

Cons: The speakers don't fit the plates and the plates don't fit the door.

Simple

Written By Syeve, Indio, CA on Tuesday, July 09, 2013

Crutchfield Customer Review (What's this?)

This product installs fast and is much better than creating your own spacer. Also, Crutchfield included them in my order at no additional cost.

Pros: Fast install

Cons: I had to drill my own holes in the product for them to match my application, but they were still better than anything I could have made.

Scosche SAT6 Speaker Mounting Brackets

Written By Ryang, Sarasota, FL on Saturday, July 06, 2013

Crutchfield Customer Review (What's this?)

This bracket did not fit my Buick. I had to cut out the speaker out of the existing bracket and retrofit to make the old bracket work. Since this bracket was free, there is no way to get your money back.

Cons: Did not work with Buick as indicated by Crutchfield.

Scosche SAT6 Speaker Mounting Brackets

Written By Anonymous, New Jersey on Tuesday, June 18, 2013

Crutchfield Customer Review (What's this?)

Product fit perfectly in my 2006 Tacoma.

Scosche SAT6 Speaker Mounting Brackets

Written By DaveR, CT on Monday, June 10, 2013

Crutchfield Customer Review (What's this?)

Did not fit my car, a Mercedes C230, or the speakers, Polk DB651. I would have had to use the speaker adapters to these adapter and do a little more to get them to work, I wound up not using these and fitting the speakers a different way

Pros: Freebie, included with the order

Cons: Did not fit my car

Scosche SAT6 Speaker Mounting Brackets

Written By Andre, Oregon on Thursday, June 06, 2013

Crutchfield Customer Review (What's this?)

It did not fit my 07 sti. I had to use a dremel and cut off two tabs and drill new holes. After modify the adapter it worked great. It had the right amount of thickness so the woofer was out of door to clear the window. The others i found were just a flat metal plate which would not have worked because it would have interferred with the window.

Pros: Soild plastic piece. Right amount of thickness to make it stick out and away from the door.

Cons: Had to modify to get it to fit.

Scosche SAT6 Speaker Mounting Brackets

Written By Brad, New jersey on Friday, April 19, 2013

Crutchfield Customer Review (What's this?)

Perfect fit. Just what I needed.

Not a 6.5" speaker bracket

Written By Anonymous, Seattle, WA on Monday, April 15, 2013

Crutchfield Customer Review (What's this?)

The overall mounting diameter was too small for some Alpine 6.5" coaxial speakers. Otherwise, these seem like they would work well. These speakers fit well in other rings from the same company that call for 6.5" speakers.

Pros: Price

Cons: Improper mounting for a reasonably standard 6.5" speaker.

Crutchfield response on Tuesday, April 16, 2013 We forwarded this review to our Technical Support team for follow-up. Lifetime tech support comes with every Crutchfield purchase.

Easy as it gets

Written By AMJ, Tampa, Fl. on Monday, April 15, 2013

Crutchfield Customer Review (What's this?)

I have a 07 Toyota Tundra fits perfect for my 6 1/2 Kenwood speakers glad I ordered them no need too make any type of alterations.

Pros: fit right into place

Cons: none

Not for 6 1/2 in speakers

Written By dnardi, Mass on Monday, April 08, 2013

Crutchfield Customer Review (What's this?)

Bought these to mount Infinity Kappa 62.9i speaker in the rear door of a Tundra. The bracket fits the truck door properly, but they do not hold a 6 1/2" speaker by default - they are too small. In order to mount a 6 1/2" speaker you need another bracket that mounts to a the speaker to a 5 1/4" hole and then has a flange to mount the 6 1/2" speaker to it.

Luckily the Infinity speakers came with such an adapter. Though using the second adapter with these makes the speaker mount farther out of the door by 1/4"causing the tweeter to contact the door grill. I had to grind down the honeycomb plastic on the back of the door pannel grill to make room.

Pros: mounts to door properly and securly solid mount and well made

Cons: doesn't fit 6 1/2" speakers by default.

Great Product

Written By Evan, Cherokee NC on Thursday, March 28, 2013

Crutchfield Customer Review (What's this?)

Bolted right up to the kicker speakers I was using and bolted right in the factory location of the old speakers. I'd buy again and recommend to friends and family.

Pros: Perfect fit, easy to mount speakers to and worked as described

Cons: None

peace of cake

Written By Abe, Texas on Monday, March 18, 2013

Crutchfield Customer Review (What's this?)

Easy install. 2011 Tundra with polk db651s. Yes, they fit perfect.

Pros: Easy

Speaker Mounting Brackets

Written By Mike, Massachusetts on Sunday, February 17, 2013

Crutchfield Customer Review (What's this?)

Both sets of speaker brackets were not compatable with my vehicle.

Pros: none

Cons: Did not fit

Speaker adapters

Written By Ben236, Florida on Friday, February 01, 2013

Crutchfield Customer Review (What's this?)

Does its purpose

Pros: Allows you to use your existing speaker locations.

Cons: Screw slots are not great, plastic between slots can break. Clips provided may not fit the location of the screw whole.

Scosche SAT6 Speaker Mounting Brackets

Written By Anonymous, Mililani, HI on Tuesday, January 22, 2013

Crutchfield Customer Review (What's this?)

Great fit

Pros: Easy install

Nice fit

Written By Clem78, Pa. on Saturday, November 10, 2012

Crutchfield Customer Review (What's this?)

Size and hole location were just right but the sheet metal screws supplied with the adapters would have eventually rubbed the electrical harness for the window and door locks creating a problem down the road.

Pros: Good fit and hole location

Cons: Additional fasteners had to be purchased to avoid future electrical problems.

In long run, works great.

Written By Anonymous, San Francisco on Tuesday, September 18, 2012

Crutchfield Customer Review (What's this?)

The brackets worked well however the included clips did not fit the holes of the car with out drilling. A trip to the hardware store solved the problem but not ideal. I think it will work for the lifetime of the car though. A bit janky, though. I wouldn't not buy it though.

2011 Toyota Tacoma Double Cab

Written By Nate, Massachusetts on Tuesday, August 07, 2012

Crutchfield Customer Review (What's this?)

These fit like a glove in the back seat my '11 Tacoma. No drilling required.

Pros: Installed easily, no modifications required.

Cons: None

Fit 2006 Scion XB, wrong mounting hardware supplied

Written By ClintS, Fort Worth, TX on Monday, July 16, 2012

Crutchfield Customer Review (What's this?)

Holes on the adapter bracket line up with factory mounting holes in door. However, supplied hardware (screws & clips) does not work due to inset of those holes. Also, no clear instructions on where to drill screws attaching speakers to bracket. I used my own rivet gun to make them work.

Pros: speakers fit in factory location

Cons: unclear instructions and fastening hardware does not work for application on specified make and model

Not for 2005 Subaru Impreza

Written By EricP, Kansas City on Monday, July 02, 2012

Crutchfield Customer Review (What's this?)

Did not fit in wife's 2005 Subaru Impreza Outback Sport - not even close to lining up. I ended up using factory brackets and cutting out the 'guts' of those.

Pros: Looks nice

Cons: Did not fit

Did not fix 06 Subaru Impreza WRX STi

Written By Andrew K, Annapolis,MD on Thursday, June 28, 2012

Crutchfield Customer Review (What's this?)

None of the mounting holes to the door lined up even remotely close. The best trick I figured out was to cut an outline of one of the speaker adapters out of the cardboard from a pizza box. Punch holes in the cardboard exactly where the existing holes are first. Then tape the template onto the door so the holes already in the door line up to uncut areas of the cardboard, then use a knife to punch holes in the cardboard where the right mounting holes need to be drilled. Then actually screw the cardboard template to the door to make sure all the holes fit. After a good fit then I taped the template to the plastic speaker adapter and used a drill to drill the new mounting holes. Once this was done the plastic speaker adapters worked fine. With all that work I question why it would be easier to use these plastic things over just cutting some rings out of MDF in the first place. I'm sure these things probably fit other cars right out of the box, or they expect you to just drill holes in your door. The later I wasn't willing to do.

Pros: Adapters came for free with my new Kicker speakers.

Cons: -None of the mounting tabs or pre-drilled holes lined up at all with the factory mounting holes in my door. -As much fabrication necessarily as to just make your own speaker brackets out of MDF.

Not a direct fit

Written By Rafster, Garfield, NJ on Sunday, June 17, 2012

Crutchfield Customer Review (What's this?)

Mounted on 2006 Subaru Impreza STI. Not a perfect fit. Need some modifications otherwise strong material. Mods are: break off all tabs drill new holes for mounting screws Easy

Pros: strong material

Cons: not a direct fit

Sufficient

Written By Alex C, Los Angeles, CA on Tuesday, May 29, 2012

Crutchfield Customer Review (What's this?)

Some installation feedback: The adapter brackets came with sheet-metal screws and "fast clips." I was unable to use the clips in the fashion for which they are designed because the mounting holes are too far from the speaker hole (about 1 to 1.5 inches away, and the clip is only 1/2 inch total width). My solution was to duct tape the clips on the back side of the screw holes for the 2 holes I was reusing. For the one hole I had to drill, I could match the drill bit to the screw.

Also, the sheet metal screws for the bracket required a washer for at least one of the holes, since the screw head easily slips through.These should be included in the bracket hardware.

Pros: They work and the material seems substantial

Cons: Hardware is lacking or requires improvisation.

Will NOT work with Sony XplodT XS-GTX1642 Series

Written By Sony XplodT XS-GTX1642, Forest Grove, OR on Monday, May 21, 2012

Crutchfield Customer Review (What's this?)

Bracket fit perfectly in my 2005 TOY Highlander.

Cons: This bracket will not work with Sony XplodT XS-GTX1642 Series speakers.

Fine fit

Written By Todd, New York on Tuesday, April 03, 2012

Crutchfield Customer Review (What's this?)

Good for the price.

Pros: Fit well.

Cons: Should include some 3M double sided tape to apply between the adapter and the door to stop any vibration. I bought and added my own. You should too if you are spending money to upgrade your speakers.

Time saver

Written By Jim, Easley SC on Monday, April 02, 2012

Crutchfield Customer Review (What's this?)

What a time saver. I installed these in the rear doors of my Tocoma in just a few min. Mounted in with no problems at all. Wish I had known about these when I installed the front speakers which took me hours to make brackets.

Adapters

Written By SteveK, Gilbert AZ on Sunday, April 01, 2012

Crutchfield Customer Review (What's this?)

These adapters were to short for the vehicle they inset the speakers a full inch from the original factory installation. Because of this there seems to be no difference from the sound of the factory speakers

Pros: fit factory bolt pattern

Cons: Don't mount speakers in the correct location Don't fit speakers well

didn't work for me

Written By KC, Co Spgs, CO on Sunday, February 19, 2012

Crutchfield Customer Review (What's this?)

These brackets came with my order of speakers. I have a 2006 WRX TR Sedan and these would not fit for my front door speaker hole. The metal around the speaker hole is raised so I could not get these brackets to sit flat against the door panel even after dremellng the edges off. I ended up having to buy some other speaker brackets. They mount up right to the factory screw holes!

Pros: Well made; sturdy

Cons: Didn't fit my front door.

Works

Written By MikeR, Indianapolis on Friday, August 05, 2011

Crutchfield Customer Review (What's this?)

I don't have much experience with this, so I had trouble with the Sony ExPlode speakers, but the Boston Acoustics fit perfectly. Only had to drill one hole for each door.

Adapter Brackets

Written By Craig N., Alfred, ME on Monday, July 11, 2011

Crutchfield Customer Review (What's this?)

At first I wasn't sure if this was going to work in my 2007 Subaru Impreza, but after second-guessing Crutchfield, I said to myself "listen to the pros". They wouldn't steer me wrong, and they've done the research. Sure enough, it worked fine for my Alpine speakers that I installed in my front doors. Without them the speaker would have just been sloppy and loose in the existing speaker cutout.

Scosche SAT6 Speaker Mounting Brackets

Written By John P., Bloomington, CA on Saturday, July 09, 2011

I bought these to install my new kicker ks6502 component speakers in my 06 corolla. Advisor said these would fit but they don't. The kicker are 6.5" but the bracket is much smaller than the speaker's mounting holes. Came up with an easy solution, just flipped the bracket and drilled screws into the plastic. Easy installation overall not much problems just the fitting issue. Good product and saves you time during installation.

Scosche SAT6 Speaker Mounting Brackets

Written By yong, austin,TX on Thursday, June 23, 2011

Crutchfield Customer Review (What's this?)

The brackets are good. but screw is not wokring. screw head is smaller than hole beside short. I was using mine..

Scosche SAT6 Speaker Mounting Brackets

Written By Anonymous, Davis, ca on Wednesday, May 18, 2011

Great addition to speakers buy Crutchfield, they know there stuff I guess
when including these. They will sell more helping with this experience they have.

2nd set

Written By Mark, US on Saturday, May 14, 2011

Crutchfield Customer Review (What's this?)

If you have a Toyota you will love how easy this makes speaker installs.I did
both rears in 20 min.

Nice solution

Written By AllanC, Orlando, Florida on Saturday, April 02, 2011

Crutchfield Customer Review (What's this?)

I got a set of speakers as a Christmas gift and when I attempted to install them
in my Toyota Highlander, I realized that I needed a special set of brackets to
complete the mounting on the car doors. I called Crutchfield and their
customer service team was able to point me to this set of brackets. They were
almost perfect. I had to do a couple of minor adjustments (drill an extra hole
on the brackets)
for the front doors.
After that, the installation of my speakers went pretty smooth. Excellent
solution.

Scosche SAT6 Speaker Mounting Brackets

Written By Rob D, Concord NH on Monday, March 28, 2011

Crutchfield Customer Review (What's this?)

Didn't even come close to fitting the 6 1/5" speakers I was using, the stock speakers were even larger then the opening for the speaker to rest into.

Be sure to get the right ones!

Written By ToyotaMan, Williamsburg, VA on Saturday, February 26, 2011

Crutchfield Customer Review (What's this?)

My 1999 was built in May 1999, which meant the GM/Jeep brackets that Crutchfield
sent did not fit. These, which are for a 2000, fit. So, check your door plate to
see which ones you need. The others do not fit at all, and modification is far
less desirable for this part than getting the right one.

Speaker Mounts

Written By Jay, Ft. Lauderdale on Tuesday, February 08, 2011

Crutchfield Customer Review (What's this?)

These things saved me a lot of work and time.. A +++

Great Product!!!

Written By PistolPete, Flatwoods, KY on Sunday, January 09, 2011

Crutchfield Customer Review (What's this?)

These adapters fit perfectly and were very easy to install. I used them with Kenwood 6
1/2" speakers into a 2000 Toyota Celica and they worked great. The only modification I
had to make was to use my own screws because the provided screws didn't work quite
right with my car but this was a very minor adjustment. The shipping was very fast and
you can't beat the price!

got burned

Written By french fry, michigan on Tuesday, November 23, 2010

Crutchfield Customer Review (What's this?)

Well I got burned with this one they said it would fit my car and so I ordered it having ordered things from other places and having them doing what the site store said it would fit/do with little or no problems. There is no way I will modify a standard part so this thing will go to a garage sale and be done with.

Had to have them

Written By techmikef, Jeffersonville, IN on Friday, November 19, 2010

Crutchfield Customer Review (What's this?)

Im glad these were included with my speaker purchase otherwise I would not have
been able to mount my speakers. The window mechanism was hitting the magnet on
the speaker when the speaker was directly mounted to the door. I did the driver side first
and it was a little tricky to figure out how to position it. Passenger side went much
smoother after doing the driver side. If Crutchfield offers them with your speakers, you
are most likely going to need them.

Need additional work

Written By bruce, Orlando, FL on Monday, April 12, 2010

Crutchfield Customer Review (What's this?)

I was very disappointed these adapters did not work as well as the others I had purchased from Soche. They fit the Alpine 600 series speakers perfectly but they did not fit into the factory door panel on my 2008 Toyota Tacoma double cab. I had to turn the adapter inside out and make and additional template so the speaker would seal tightly to the door with no exposed gaps etc. Between Alpine and Soche they did provide plenty of screws to use.

Doesn't fit at all

Written By Keith, Seattle, WA on Monday, January 18, 2010

Crutchfield Customer Review (What's this?)

These adapters didn't fit the Boston SX65 speakers they came with at all. Luckily, I was able to use the adapters that came with the speakers to make it all fit. I'm not even sure why Crutchfield would include these brackets with the Boston SX65s. The problem was that the brackets had the right size hole for the speaker to slide into, but there was no way to attach the two together. The speakers screw holes are on tabs that extend out from the frame and the brackets didn't have anything that the screws could tap into. I guess I could have glued the speaker to the bracket, but I found a better way.

Scosche SAT6 Speaker Mounting Brackets

Written By Bill, Houston tx on Sunday, January 17, 2010

Crutchfield Customer Review (What's this?)

fit nicely

Brittle, useless with 6-1/2 inch Boston Acoustics SX60

Written By akoudriashov, NH on Wednesday, June 24, 2009

Crutchfield Customer Review (What's this?)

Got these with Boston Acoustics SX60 component speakers.
The brackets are too small for BA 6-1/2 woofers, so not sure why Crutchfield provides them with BA SX60.
When I attempted to drill holes for BA woofers, the brittle plastic just cracked all over the place.
Fortunately, I was able to install BA SX60 woofers without these stupid brackets.
Mr. Crutchfiled, please do a better job selecting speaker installation brackets!

Scosche SAT6 Speaker Mounting Brackets

Written By DJ, Long Island, NY on Tuesday, June 16, 2009

Crutchfield Customer Review (What's this?)

Although this bracket makes the install possible, all of the mounting tabs
had to be snapped off and new holes had to be drilled. The brackets are
made of a very brittle plastic becareful when drilling or fabricating.

2009 Yaris 5 door LB install

Written By Richie, North Port, FL on Saturday, May 16, 2009

Crutchfield Customer Review (What's this?)

These brackets are too small for the 6 1/2" Infinity Reference series speakers. I had to mount the metal spacer rings that came with the Infinity's to this by drilling them out and using small bolts (that I had to cut down) and nuts before I could mount the speakers to it. I had to drill all new holes in the rear door panels of my 5 door Yaris liftback and add washers to the screws because the mounting holes in these brackets are too big for the screws. It was do-able. But if anyone thinks it is a plug and play replacement for the factory speakers be prepared to get creative. As for the front doors, I just used the black plastic speaker mounting adapters that came with the Infinity's and just redrilled new holes.

used in a Toyota Tacoma

Written By Doug, Lodi, Ohio on Saturday, May 16, 2009

These Speaker Brackets worked good. When I looked at the Pic on the web site,they didn't look tall anuff. I didn't think they were going to be what I needed. When I got them, they ended up to be exactly what I needed..........
The only down side was the slots that the speaker screwed into didn't leave one with the real secure felling that they were in there good & tight, expecally with the vibration the speaker goes threw, but you need them, so what can you do? ALL-in-ALL. the front door brackets work great, the back door brackets are OK.

2006 Subaru WRX - terrible fit!

Written By C.M., New Hampshire on Wednesday, May 13, 2009

Crutchfield Customer Review (What's this?)

None of the holes in the adapter fit the existing inserts in the front doors of
my '06 WRX. I was faced with a choice of drilling the doors, or re-drilling the
adapters, which i did after cutting off all tabs to make the bracket physically
fit the door.

The speakers roughly fit the brackets...but it wasn't a perfect fit. You would
think that would line up with a standard speaker mounting pattern, but it
wasn't perfect.

If you're remotely good with hand tools, you can make these work, but they
may as well be any random speaker spacer. They do not fit this car.

Rating of 2 stars because they are able to be massaged into working; I
have no doubt I'll be back in the doors to fix things in the future.

Worked Great

Written By Matt, MN on Wednesday, April 08, 2009

Crutchfield Customer Review (What's this?)

Worked great in my Subaru WRX! I just drilled in the plastic and made my own holes to match up to factory prethreaded holes. Nice product!

worked pretty good

Written By chris, germantown, wi on Thursday, April 02, 2009

These came with my Alpine SPS-600 series speakers. I bought for the front and rear door of my 2005 Highlander. I don't think the speakers would of worked with the mounts except the fact Alpine provided an adapter bracket with the speakers. This proved to be the ticket. It all fit perfectly onto the mount and the mount went right to the original speaker attachment screws. I did have to wedge one of the screws at an angle but the plastic allowed for it without cracking.

This was the easiest speaker install that I have ever done with the free mounting hardware provided by Crutchfield.

Thanks Crutchfield - I be jamming!

Scosche SAT6 Speaker Mounting Brackets

Written By Heriberto, Miami, FL on Thursday, April 02, 2009

I did not like the brackets for the 6.5 speakers on my Corolla. The material is fine but the rim where you attach the speaker is not wide enough to fully screw in the speaker. I had to screw in at weird angles to be able to reach plastic because the speaker was wider than the adapter. One thing that doesn't make sense is that the clips that are meant to be screwed into for the screws not to back out are not long enough to reach where the holes are in the adapter.

Only one drawback

Written By Jar, Georgia on Tuesday, March 24, 2009

Crutchfield Customer Review (What's this?)

These brackets worked great other than the slight modification (according to Crutchfield advisor) to the rear door panels. It ended up being a pretty hefty modification to make the 6.5" Infinity reference work in the rear doors of 2007 Toyota Tundra Crew Max. I shaved all of the rim around the waffling completely off to get them to fit. Set me back 20 minutes on the install. The front door mounting brackets were incredibly easy in comparison!!

Scosche SAT6 Speaker Mounting Brackets

Written By john, indianapolis on Wednesday, March 04, 2009

Crutchfield Customer Review (What's this?)

wouldn't fit my kenwood 6.5" front door speakers

but it did fit kenwood 5.25" rear door speakers flawlessly

the speed clips couldn't clip to the door but i did still get 'em to work to my
satisfaction

Perfect fit

Written By Sean, Liberty, MO on Tuesday, February 17, 2009

Crutchfield Customer Review (What's this?)

I installed these in my 2005 Prius and they worked perfectly. Other reviewers said that they had problems with 6.5" speakers, but I tried them with a set of Sony XS-GT1626A speakers and they worked great. The only snag was that the speed clips do not attach to the body of the car door--if they even fit (which mine didn't) they wouldn't line up with the holes in the adapter. Also, there was a lot of unnecessary hardware to confuse the installation. But they worked!

It fit just fine

Written By Steveflier, Allen, TX on Monday, February 16, 2009

Crutchfield Customer Review (What's this?)

The 5 1/4" adapter fit just fine for the front doors of my 2005 Corolla.

Be forwarned

Written By christopher, Roselle,IL on Sunday, February 08, 2009

Crutchfield Customer Review (What's this?)

Well at least they were free! The rear spealer adaptor is so far off, I had to use some masonite to make custom speaker mounts. They are made well, just not even close to fitting.

NOT EVEN CLOSE

Written By Gary, Corona CA on Sunday, January 25, 2009

Crutchfield Customer Review (What's this?)

Not sure if the wrong ones were sent or??? These didn't even come close to fitting in the stock speaker mounting location on my 05 4Runner

Scosche SAT6 Speaker Mounting Brackets

Written By lotust1, NY on Thursday, January 22, 2009

At least these were free. I used these on my 08 tundra with some Blaupunkt GTx652 they did not line up with any of the holes in the Speaker Brackets the speakers are too large to fit properly.. The Speaker Brackets material itself is also junk. PRE DRILL is key I guess.

Scosche SAT6 Speaker Mounting Brackets

Written By BILL, Buffalo, New York on Sunday, September 14, 2008

Crutchfield Customer Review (What's this?)

All I can say is that after modification and a call to Crutchfield Support I was able to get these adaptors to work. Was missing instruction sheet and contained a good deal of confusing "extra" miscellaneous hardware which did not help!!!!

2006 Sonata

Written By joseph, Boston. Ma on Thursday, September 04, 2008

Crutchfield Customer Review (What's this?)

The only issue i see is that after installing them there were spaces/ gaps where the stock brackets was a perfect fit. I wish there was a way to reuse the original but they were part of the speaker. i don't hear any vibrations or anything though.

Scosche SAT6 Speaker Mounting Brackets

Written By Mike, Massachusetts on Sunday, April 06, 2008

i bought these to install my MB quart 5 1/4" speakers in the front doors of my 2008 Toyota Corolla.
I had to file a little off the mounting cutout to allow the speakers to fit.
I cant see how a 6 1/2" speaker could possibly fit.
The heads of the screws provided to secure the adapter to the door, were too small, so I had to place washers behind the heads so they wouldn't slip through the holes.
The slide on speed clip/nut doesn't slide on the door panel of my Corolla because there is a lip on the door cutout(not the adapters fault).So you have to reach in and hold the clip from the back. However....
If you are using these with foam speaker baffles(as I was to protect from rain)there is no way to reach your hand in to hold the speed clip/nut for the screw. I had to use some glue to hold the clips to the inside of the door while I attached the screws. I ended up cutting the back of the foam baffles so I could reach in and hold the clip by hand.
You have to be careful screwing the speaker to the adapter and not screw too tight, as they easily strip the plastic adapter. I stripped one hole in each bracket, and could have easily stripped more.
Overall I believe these are easier than having to make your own adapters.

Scion tC

Written By Garrett, Lawrence, KS on Tuesday, February 06, 2007

Crutchfield Customer Review (What's this?)

Fit great in door panels with some additional drilling for speaker mounts when installing 6 1/2" speakers. For the rear speakers, I had 6 1/2" for the rear also, and these will not fit for this speaker size; 5 1/4" might though. I was able to mount the new speakers directly to the subframe by drilling new mount holes and using machine screws to secure. If I had this information when buying, I could have saved myself $12 and only bought one set.

Aces!

Written By Dennis, St Louis, MO on Thursday, January 04, 2007

Perfect fit on 2006 Hyundai Sonata front and rear after breaking the tabs. Factory rivets must be completely removed after the stock speakers are removed; I used a Dremel and cutoff wheel. Three new holes drilled, 3/16" aluminum pop rivets and done! Adapter fits Polk DB-650s poifecly.

Toyota Brackets

Written By Logan, Harvard, MA on Saturday, July 01, 2006

Crutchfield Customer Review (What's this?)

These will work great to mount your 5.25 speakers in the rear of your Scion tc. They will not however work on your door speakers. Also when mounting these in the rear you need to break off a few tabs, at first try I thought they didn't fit at all. The fit isn't perfect you'll have to be careful as one hole would alwasy be just out of alignment and would try to strip the bolts.

Perfect fit!!

Written By Jason, South Bend, IN on Monday, December 05, 2005

These are a perfect fit in my Corolla. Mounted 5.25" speakers with no problems. There is even a hole for the speaker wire to come out of. These made up for the grief I had with the 6"x9" to component adpaters!!

Not for 6.5

Written By Houdlum, Texas on Friday, June 24, 2005

Crutchfield Customer Review (What's this?)

Unfortunately this adapter did not work with the 6.5 in speaker they shipped with. The holes do not match up. However, they fit perfectly the 5.25 in "other" speakers I had.

Speaker Adapter for Scion xb, front doors

Written By Walter, Winter Springs, FL on Saturday, May 28, 2005

The adapter supplied is essentially the same as the speaker enclosure for the factory speakers. Simply mount the new speakers in the adapter, then remove the factory speaker and replace with the new ones. Holes match up and the Crutchfield speaker harness adapter make it even better! Couldn't possible be easier. Well Done!!

Questions & Answers Ask the community. Share your knowledge.

1 question already asked

Searches related to the Scosche SAT6 Speaker Mounting Brackets Install 5-1/4" or 6-1/2" speakers in select 1999-up vehicles