About the Sennheiser CH 650 S
Make a strong connection with Sennheiser
Make a strong connection with Sennheiser
Sennheiser has developed the ideal link between two of its best-sounding headphones and their high-performance headphone amplifiers. The CH 650 S is a high-quality balanced cable designed for the HD 650 and HD 600 headphones. Replace the stock cable with the CH 650 S and connect it to the Sennheiser HDVD 800 or HDVA 600 to open up a world of audiophile delights for your ears to revel in.
This cable's four-pole XLR plug preserves the symmetrical signal flow from your Sennheiser amp through two pairs of oxygen-free copper leads all the way to the independent left- and right-earcup connectors. This results in very precise signal transmission with almost no distortion, so you can maximize the sonic potential of your headphones and amplifier. You'll enjoy clean, wide-open sound with fine detail shining through and virtually no noise.
Product highlights:
- balanced headphone cable with 4-pole XLR connector
- left- and right-channel 2-pin mini-connectors designed for connection to the Sennheiser HD 650 and HD 600 headphones
- allow balanced connection to the Sennheiser HDVA 600 and HDVD 800 headphone amplifiers
- two pairs of oxygen-free copper straight leads maintain a symmetrical signal flow to each channel
- gold-plated contacts
- length: 9.8 feet (3 meters)
- weight: 3.4 oz.
- warranty: 2 years
- MFR # 505634
What's in the box:
- 10' (3 meter) Headphone cable for HD 650 and HD 600 headphones (with left and right 2-pin connectors on one end and one XLR-4 connector on the other end)
Customer reviews for Sennheiser CH 650 S
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sennheiser CH 650 S
Product Research
Features
Overview: The Sennheiser CH 650 S is a high-end cable for the HD 650 and HD 600 audiophile-grade headphones. It is 10' (3 meters) long, with left and right 2-pin connectors on one end and a single XLR-4 connector on the other end. The jacket is made of a high-quality, low-friction material to minimize friction and distortion picked up through cable contact.
Matched: The CH 650 S is optimally matched to Sennheiser's HDVD 800 and HDVA 600 headphone amplifiers. These headphone amps have XLR-4 output jacks to accommodate this cable.
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...