Skip Navigation

Dynamat 10115 Original Speaker Kit

Two 10-in. x 10-in. Sheets

8 Reviews

Item #: 15410115

This item is no longer available.

Original Price: $14.99

Shop all Sound Deadening

Overview

Our take on the Dynamat 10115 Original Speaker Kit

Stop fighting annoying speaker rattle! Apply Dynamat Original to your vehicle's resonant surfaces and enjoy improved clarity, loudness and bass response from your car stereo. Dynamat Original is a styrene-butyadine-rubber-based, pressure-sensitive adhesive-backed, heat bondable vibrational damper.

Stop fighting annoying speaker rattle! Apply Dynamat Original to your vehicle's resonant surfaces and enjoy improved clarity, loudness and bass response from your car stereo. Dynamat Original is a styrene-butyadine-rubber-based, pressure-sensitive adhesive-backed, heat bondable vibrational damper.

Contains two 10" x 10" pieces of Dynamat Original (0.070" thick). Ideal for mounting your speaker to a metal baffle like a car door or rear deck lid.

Want to learn more about Dynamat's speaker kit noise-reduction properties? Read some up-to-date technical information from Dynamic Control. Note: To view this file you will need Adobe Acrobat's PDF reader

Easy to apply and well worth the money. Takes the rattle out.

Matt, eau claire, wi

What's in the Box:

  • 2 sheets of Original Dynamat
  • Instructions on back of box
Reviews

Dynamat 10115 Original Speaker Kit Reviews

Average Customer Review:

8 Reviews

It works, *vbs*

Written by: FaireMaiden from Yon mountains on April 8, 2009

Crutchfield Customer Review (What's this?)

We live in the mountains and suffer excruciatingly hot summers with constant mosoons, and freezing cold, snowy/sleety winters, with plenty of rain in Spring and Fall as well. When we decided to replace our Mitsubishi Montero SUV factory system with a new system, (2 dash-speakers, 4 door-speakers, and receiver), we thought it best to get the Dynamat, (as well as Baffles), for the speakers going in the doors. I wasn't sure if it would really make a difference, but the 'before and after' have certainly told the tale. There is no rattling anymore. Nor is the sound shadowed by the faint, but constant, street noise either. I really didn't think these accessories would matter all that much, but they do, and I'm glad we spent the few extra dollars to get them. I'm also glad for the protection that the Baffles gives us since our weather is so severe all the time.

Pros:

Cons:

Dynamat 10115 Original Speaker Kit

Written by: Matt from eau claire, wi on February 22, 2009

Easy to apply and well worth the money. Takes the rattle out.

Pros:

Cons:

It works

Written by: Lee from Lexington, KY on February 9, 2009

Crutchfield Customer Review (What's this?)

This stuff really works, it reduced the amount of rattle in my door significantly.

Pros:

Cons:

Does it help????

Written by: david from Dallas on September 2, 2008

Crutchfield Customer Review (What's this?)

Does it help??? I have no way to prove it...But I spent alot on speakers and a nice head unit. Why would I not get this? The metal on cars gets thinner by the year making lower powered units rattle speakers. On larger speakers there is some times small gaps letting sound mingle. The seal is perfect and I used the center of the cut out on the inside of my doors to make sure metal and magnet do not touch....Bad Stuff.. Would buy again

Pros:

Cons:

Dynamat 10115 Original Speaker Kit

Written by: Timothy from California on May 20, 2008

If you want a great sounding stereo sytem, Dynamat is the key foundation to achieving that! My 92 Civic HB is fully dynamatted! That's right... the fire wall, the floor, the headliner, the doors ... everywhere! Adding dynamat to your car will greatly improve your sound systems efficiency and will save you from the humility of people laughing at you when you drive down the street because it sounds like your car is about to fall apart. My system sounds so clean and even when I am bumpin my hardest, you can stand outside of my car and you will not hear any rattling, infact you can bearly even hear the music. That's how efficient this stuff is!

Pros:

Cons:

Dynamat 10115 Original Speaker Kit

Written by: ben from Wisconsin on February 27, 2008

Crutchfield Customer Review (What's this?)

Did a subwoofer swap on my Jeep. Wrapped the sub enclosure with dynamat where it attached to center console. It smoothed out the sound and removed any rattle that I had with factory setup. Great stuff. Best price I have found.

Pros:

Cons:

Definate best buy!

Written by: Ira from Mercedes, TX on July 6, 2007

Crutchfield Customer Review (What's this?)

All I can say is this stuff is awesome, i wanted to put it on then cut out the space for the speaker port but the glass on my '06 Mustang was too slanted so that was a no go. I ended up using my factory speaker as a template to cut out the port but man i cut it and the Dynomat decided to stretch on me. But I could definately hear a difference in sound and bass with it on and no more rattles from the rear deck except for the trunk lid. I even had enough to use on my licence plate so i did not have to buy the licence plate kit.

Pros:

Cons:

Dynamat 10115 Original Speaker Kit

Written by: don_effonefifty from MO on November 9, 2005

This stuff does what they say it does and more. The adhesive on the back is forgiving in that it allows you to remove and recenter when you are trying to fit it onto curved surfaces or into hard-to-reach places. One bonus feature; when you are installing door speakers, better speakers sometimes have a greater mounting depth than the OEM's you remove, and in my case, the speaker mounted in kind of a 'bowl' that was of course metal. I wasn't going to use this stuff until I realized the speaker kind of sucked itself into the mounting area; even through the baffle, the magnet was drawing against the back of the 'bowl'(this would no-doubt have really affected sound quality!). I put a slab of Dynamat behind the speaker and it insulated the magnet from the metal behind it. Awsome bonus!!!

Pros:

Cons:

Details

Hands-on research

What's in the box?

Download the Dynamat 10115 Original Speaker Kit manual

  • 2 sheets of Original Dynamat
  • Instructions on back of box

Product Research

Installation
Special Features
Specifications

Installation

  • Clean mounting surface (bare metal)
  • Using a razor knife or scissors cut Dynamat to the desired size
  • Apply Dynamat centering the sheet over the speaker opening
  • Apply pressure, working Dynamat into the contours of the door panel
  • Using speaker hole as a guide, cut away center portion of sheet

Special Features

Mount the speaker as you normally would, Dynamat will create a seal and damp the door panel to maximize the speaker's performance.

Use any excess Dynamat to attach to the speaker basket, thus cutting down on resonance.

There is a high tack permanent adhesive with a peel off plastic liner on the back of the Dynamat.

The material cuts easily with scissors or a razor knife.

The surface is black and paintable.

Dynamat will increase the mounting height and reduce mounting depth by .085". It is used to install two speakers for maximum performance.

Specifications

  • Temp Range: -30 to +350 degrees
  • Damping loss factor: 0.08
  • Weight LBS/SQ.FT: 0.66

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Library