Crutchfield Customer Review (What's this?)
First of all I want to clarify some things that I had read on other reviews of this product. First of all you don't need gloves, this stuff is too sticky for gloves. Second they recommended that you get the roller, I purchased the expensive one and really did not have much use for it so don't waste your money on one. I found that I had better luck just using a metal spatula like the ones you use to spread plaster. I used a 3" and a 1.5" on tight spots. You hold the spatula with one hand and put pressure on the metal part of the spatula with your other hand as your flattening the sheets and you use your fingers too where it's more contoured. I made the large cuts with a razor knife and the smaller cuts with a pair of scissors. I thought I was going to able to do all of my extended cab Colorado with this box but all I was able to do was the four doors, two regular doors and the two smaller ones. I have a little left to put on the floor pans but not enough to cover the whole floor. I wish I could have been able to do the entire floor of the truck. If you purchase this product thinking you can do the trunk and all the doors you are going to be disappointed. I think if you want to do the 4doors and the trunk you will need two of these boxes, if your going to just do the doors you'll be okay or if your planning on just doing the trunk you'll be okay. When I first looked at the Dynamat Extreme I was not impressed but after installing it I was impressed, just wish it was cheaper.
Pros: Good quality product, very sticky but easy to use after you get the hang of it.
Cons: Not enough material for the price, too expensive.