Skip Navigation

Dynamat 19100

License Frame Kit

Item #: 15419100

In Stock

17 Reviews | Ask Questions

Your price: $14.99 Earn up to 15 Rewards points

Add to Cart

+ Add to wishlist + Email me alerts for this product

View all associated offers

You achieve excellence by sweating the details, and that's why Dynamat offers the 19100 license frame kit. It's designed to eliminate the most commonly overlooked noise offender in your vehicle — the annoying rattle and buzz of a naked license plate!

The kit contains everything you need to treat one license plate.

  • license plate frame with Dynamat logo
  • one 4"x10" piece of Dynamat Xtreme (to be applied to the back of your plate)
  • four pieces of foam gasket

Warranty: 60 days.

Dynamat 19100 Reviews

Average Customer Review:

17 Reviews


Written by: Djru from Tennessee on November 15, 2015

Crutchfield Customer Review (What's this?)

What more can u say. Does what it is ment to do simple and easy to apply

Pros: Works, Easy application , pre cut. Again. Works 100%. So clean the back of your plate with rubbing achlohol as with any sound deadener. The plate might look clean. But worth the few seconds

Cons: None that I can logically think of If u don't clean your plate properly except the sound deadener not to stick just like any of the rest.

Dynamite Plate Kit

Written by: Anonymous from New York on October 27, 2015

Crutchfield Customer Review (What's this?)

Dynamat isn't big enough to cover the whole license plate. Not worth purchasing. You would be better off buying a larger piece of Dynamat and cutting it to the size you need. Didn't use the frame because I don't want people thinking there's something worth taking inside my trunk (since id be advertising for Dynamat)

Pros: None



Written by: Jerome from Los Angeles, CA on July 5, 2014

Crutchfield Customer Review (What's this?)

The original license plate holder I had on my Nata would make that nasty rattling noise whenever I would have my two 12' Kenwood subs like halfway which made my system sound like trash and that's a no go. I've been wanting to Dynamat the trunk but I don't have the cash for the full install as of yet so I decided to order this Dynamat license plate holder as a starting point for cleaner sound and I must say I didn't expect the change to be so drastic there's no more rattling sounds coming from my trunk or the license plate. I mean I still have to Dynamat my trunk for sure but at least I can drive and bump my system with causing horrible road noise to other commuters.

Pros: It actually deadens sound coming from the trunk. And the price is on point as well you can't beat it for a license plate holder that actually dose something other display random wording.

Cons: None

dynamat license plate

Written by: Melvin from Lake Worth, FL. on June 14, 2014

Crutchfield Customer Review (What's this?)

Works great, I don't hear the annoying license plate rattling anymore. I will purchase the trunk kit to have 0 rattle from the trunk itself.

Pros: Works as it says

Cons: Logo on the license plate kit lets people know you have a system, not a good thing when you live in a not so good neighborhood or going through one.


Written by: johnny from Huntingdon tn on May 29, 2014

Crutchfield Customer Review (What's this?)

Works as described. No more rattle in my license plate

Pros: Easy to install. Works perfect

Cons: None

Dynamat 19100

Written by: Anonymous from Fargo ND on May 17, 2014

Crutchfield Customer Review (What's this?)

I never realized there was a solution to license plate rattling, except to wedge something in there.

Pros: Worked as it said it would

Cons: Cheesy bracket, I didn't use it.

Dynamat plate

Written by: Mel from Brooklyn on April 15, 2014

Crutchfield Customer Review (What's this?)

The Dynamat plate is great, everyone should have one. This plate solve all your problems and it looks great buy one now.



Dynamat 19100

Written by: Dawn from North port Florida 34287 on November 19, 2013

Crutchfield Customer Review (What's this?)

Stopped the noise

Pros: Awesome


Cure for the rattles

Written by: cabajandro from Capitol Heights, MD on September 30, 2013

Crutchfield Customer Review (What's this?)

easy and cheap. i didn't think it would make it a difference but it did. will recommend

Pros: cheap

Cons: not sure if making a bigger piece would help even more

It Works

Written by: cawgijoe from Centreville, VA on May 2, 2013

This is my first use of Dynamat. Thought I would start small and see what it would do to stop a rattling license plate. This stuff really works. Easy to install. Plate is dead silent. This stuff is not cheap, but does work.

Pros: Does what it says it will. Easy to install. Good directions.

Cons: Expensive

It's worth it

Written by: Notube27 from Las Vegas, Nevada on May 1, 2013

Crutchfield Customer Review (What's this?)

Before I purchased this product I had a regular license plate cover and I had 4 screws in instead of two, which is what most people have on it. Even with 4 screws screwed in tightly my license plate still rattled. So I wanted to get something affordable that would stop that rattling. So I bought the Dynamat license frame kit. It doesn't come with screws or screw drivers because you should already have that stuff. After I installed the frame to my car my license plate doesn't rattle at all. If it does you can't hear it. I am really satisfied with this product and I would recommend it to anyone with subwoofers that bump hard.

Pros: So easy to install an idiot can do it

Cons: Have to install yourself

Did the job, and saved me some money.

Written by: G.K.G.!!! from Alexandria, Va. on March 26, 2013

Crutchfield Customer Review (What's this?)

Does the job; and then some! Before I got it I was hearing a lot of vibration from the back, but not it's virtually gone. I may still dynamat the rear deck in the future, but now I don't have to. If you're thinking about using Dynamat, start with this product. It might save you a lot of money.



It worked OK I guess

Written by: Joseph from Westerville on March 26, 2010

Crutchfield Customer Review (What's this?)

Just installed it, it reduced the vibrations from the plate, but by no means did it come close to totally eliminating the license plate rattle. And I'm hardly rocking any sort of ridiculous system, just one Alpine 10" sub with a 300W Rockford Fosgate woofer on a 1998 Honda Prelude in excellent shape.

If Dynamat wants to get serious about this product, you should get a much larger size sheet of Dynamat, not one 3/4 size of your license plate! If anything, it should be slightly bigger than the plate, and let you trim accordingly. Its not like the stuff is difficult to cut.

If I had to do it again (which I probably will), I'll buy one of Dynamats bigger kits to do some of the speakers and trunk, and use a spare piece to properly cover the license plate. Oh, and the frame they give you is about the cheesiest thing I've seen in a while...



It does what it's supposed to do

Written by: Gabriel from Miami, Fl on May 2, 2007

Crutchfield Customer Review (What's this?)

This product does a good job of eliminating the annoying rattle that used to come from my license plate. i can now safely (and happily) crank up my Rockford sub, and not have to listen to an annoying rattle coming from my trunk. I gave it five stars despite the fact that the package i received didn't have the neoprene stickers that the instructions asked me to stick between the plate and the plastic license cover. oh well, no big deal, im really paying for the dynamat, not some cheap double sided stickers... Thanks again Crutchfield for expedient delivering and processing.



Get This If You Have Pounding Subwoofers!

Written by: popimp92 from Fairfield, CA on April 22, 2006

I ran across this product by Dynamat on accident while searching for a door speaker kit. I decided why not try it out? besides nothing sounds worse than a rattling licence plate on a great sound system going down the street! I noticed a HUGE difference while standing outside my vehicle with the volume up high. One of the best investments I've made so far for my system and it's super easy to apply. A great product and a must have for stereo enthusiasts who demand the best from their car stereo system.



Dynamat 19100

Written by: Rowhan from Paterson, NJ on June 16, 2005

Like most cars, I had to treat my trunk and license plate with some dynamat.This is worth the money.I had a crumbled license plate(meaning its like taking a sheet of paper,crumbling it,then unfolding it).That sheet of paper is close to what my license plate looks like, so this product definitely helps.Cool frame too.



Dynamat 19100

Written by: Matt from Great Bend, KS on April 30, 2005

This is a wonderful product. It reduces the rattles of your license plate, and comes with a cool license plate frame.



Hands-on research

What's in the box?

Download owner's manual

  • 1 Plastic license plate frame
  • One 4" x 10" sheet of Dynamat Xtreme
  • Four 5" x 1/4" self-adhesive neoprene foam strips
  • 1 Dynamat logo window sticker
  • Installation sheet
  • Installation Instructions on package.

Product Research



Overview: This kit consists of a plastic license plate frame, a 4"x10" sheet of Dynamat Xtreme and 4 pieces of foam gasket material. The kit is made specifically to stop the rattling noises caused by a vibrating license plate on a vehicle with a high powered audio system. 

Dynamat Xtreme: Dynamat Xtreme provides 4 times the damping efficiency of Original Dynamat, the conforming ability of Premium Dynamat, and the radiant energy reflection of Super Dynamat. Dynamat Xtreme has an aluminum layer for high-temperature areas.

High Tack Permanent Adhesive: There is a high tack permanent adhesive with a peel off plastic liner on the back of the Dynamat Xtreme.


Installation Steps:

  1. Remove the license plate from vehicle.
  2. Remove any dirt or grease from the back of the plate.
  3. Firmly apply Dynamat to back of plate. Press firmly to eliminate any air gaps.
  4. Apply the adhesive neoprene strips to the backside of the Dynamat License Plate frame.
  5. Attach license plate into guides of the License Plate frame, then install on vehicle.

Note: The package comes with an "Installation Sheet" which actually has instructions for installing Dynamat's Speaker Kit one one side and a listing of Dynamat's specialty kits on the reverse side. The actual instructions for installing the License Frame Kit are on the back of the package.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Product reviews from the Crutchfield Labs

Adding Dynamat sound damping to your car quiets noise and vibration, giving you a quieter ride. This short video presents an overview of what Dynamat is and how it makes your music sound better.

What are the Labs?

Customer Q&A

Searches related to the Dynamat 19100 License Frame Kit