About the Sony XS-L100P5M
Don't struggle to hear your music over the crashing of the waves. Sony's XS-L100P5M 10" marine subwoofer makes a nice addition to your boat's audio system, pounding out deep, full-bodied bass that you can enjoy while relaxing on the water.
Sony built this sub with the marine environment in mind — it sports a UV- and salt-resistant design that can endure long days in the heat of the sun. The gold-plated binding posts resist corrosion, so you don't have to worry about moisture damage.
The unique cone design contains spiral ribs for increased rigidity. The result — low distortion and nothing but clean, accurate sound. You can use this sub for free-air applications — no enclosure is required.
Product highlights:
- 10" marine subwoofer
- polypropylene woofer with butyl rubber surround
- 6-ohm voice coil
- water-resistant grill
- suitable for free air use
- free-air capability
- power range: 50-200 watts RMS (800 watts peak power)
- frequency response: 27-3,000 Hz
- sensitivity: 88 dB
- mounting depth: 5"
- warranty: 1 year
- MFR # XSL100P5M
What's in the box:
Sony XS-L100P5M owner's manual
- 10" Marine subwoofer
- White plastic grille with 4 machine screws (installed)
- Eight 1.5" mounting screws
- 8 Plastic white caps
- 2 Gold-plated female slide-terminals with clear rubber housing
- 33" Foam self-adhesive strip
- Template
- Installation/Connections guide
- "Thiele/Small parameters" sheet
- "STOP" note
- Limited Warranty sheet
- Canada Consumer Warranty sheet
- European Guarantee Information Document
Customer reviews for Sony XS-L100P5M
Loading...
Loading reviews...
Average review:
2.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sony XS-L100P5M
Product Research
Features
UV and Water Resistant: The Sony XS-L100P5M is a marine rated 10", 6-ohm subwoofer that can handle up to 200 Watts RMS. The Sony woofer meets the following marine certifications.
- Water Resistant Marine Design: IPx5 Certified
- UV Resistant: Tested under ASTM G154
- Salt Resistant: Tested under ASTM B117
Woofer Design: The marine woofer is a 10-inch, five-sided polypropylene cone with a rubber surround that provides loud and deep bass response.
Connections: The woofer's uses coated tinsel leads and gold-plated speaker terminals to guard against corrosion. The woofer also comes supplied with gold-plated female slide terminals with clear rubber housings to attach to your speaker wires when connecting them to the woofer.
Grille: The woofer comes with a removable UV-resistant plastic white grille to protect the woofer from punctures and other damages. The grille is secured to the woofer with 4 bottom mount screws before mounting the woofer.
Mounting: The woofer mounts into place with 8 supplied 1.5" screws. The subwoofer also comes supplied with 8 white plastic caps to fit over the heads of the screws to prevent corrosion. It is recommended that the surface be at 3/4" thick that you are attaching the subwoofer to. The woofer comes with a self-adhesive foam strip to act as a gasket between the woofer and the opening.
Free-Air Subwoofer Design: The woofer is designed for mounting in an infinite baffle (free-air) application, so no enclosure is necessary.
Subwoofer Mounting: The measurements in the Crutchfield database are taken without the grille. With the grille installed, the mounting height increases to 1.375" and the frame diameter increases to 11.238".
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
