Stereo Amplifier: The Sony
STR-DH130 Stereo Receiver features a 90 watt x 2-channel (8-ohms, 20Hz-20kHz,
THD 0.09%) amplifier for good sound quality with little distortion even at high
A/B Speaker Switching: The
STR-DH130 features A & B speaker outputs which allows 4 speaker
connection so you can run a pair of speakers in two different rooms of your
home. The stereo receiver allows you to select which pair of speakers you
wish to play or play back both of them. The A & B speaker outputs are wired in
parallel. The stereo amplifier supports 8 to 16-ohm speakers.
Tone Adjustment: The Sony
STR-DH130 features independent Bass and Treble controls (-10 to +10 dB) so you
can adjust the tonal quality of your connected speakers.
Analog Audio Output/Inputs: The STR-DH130 features 5 analog
audio inputs (4 RCA/1 minijack) and two analog RCA outputs.
- Audio Input Only: labeled SA-CD/CD, SAT, and BD/DVD
- Audio Input/Output: labeled MD/Tape, and Video
Note: This unit does not contain a video input/output.
Speaker Outputs: This unit
features two sets of speaker outputs (A and B), each with spring clip terminals.
You can independently turn on or off each pair of speakers, as well as play both
pair of speakers. The speaker pairs
are wired internally in parallel.
Headphone Jack: The receiver
features a 1/4" headphone jack for private listening. When headphones are
plugged into this output, the sound from the speakers is muted.
AM/FM Tuner: The
STR-DH130 features a built-in AM/FM tuner for listening to AM and FM broadcast
stations. The Sony STR-DH130 features a threaded coaxial FM connection and a
dual spring-clip AM terminal. The unit comes supplied with an AM loop antenna
and a FM wire antenna.
Station Presets: You can preset up to 30 FM station and 30 AM
and Source Naming:
Each preset station and program source may be given an index name of up to 8
Auto & Direct Tuning: The built-in tuner also features Auto tuning and
Direct tuning via the supplied remote control.
IR Remote Control: The supplied IR remote control
(RM-AAU130) is pre-coded to control this Sony receiver, Sony TVs, Sony CD
players, Sony DVD players and recorders, and Sony Blu-ray disc players and
recorders. You can change the factory settings of the input buttons on the
remote to suit the components in your system.
Auto Standby: This energy saving features enables the
receiver to set to automatically switch to standby mode if it is not in use or
no audio signal is sent to it for 30 minutes.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.