Chat
Contact us
Close contact box
Connect ID #
555 010 997 4
Connect ID #
555 010 997 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Sony XDP-MU110 Digital Link Sound System Factory system upgrade module with cradle for iPhone® or iPod touch®

Item # 158XDPM110

Got an iPod touch® or iPhone®? Got a factory radio without an auxiliary input? Sony's XDP-MU110 Digital...

Find what Fits your vehicle

Remove

Checking fit...

Got an iPod touch® or iPhone®? Got a factory radio without an auxiliary input? Sony's XDP-MU110 Digital...

Item # 158XDPM110

Shop all Sony Factory Audio Upgrade Packages

About the Sony XDP-MU110 Digital Link Sound System

Buck Pomerantz

Add a source and upgrade your sound

Got an iPod touch® or iPhone®? Got a factory radio without an auxiliary input? Sony's XDP-MU110 Digital Link Sound System lets you play your iPod through your car's factory stereo system, and gives you an upgrade in overall sound quality at the same time. The system includes a digital sound processor (DSP) module, a cradle/dock, and a wireless remote control.

Add a source and upgrade your sound

Got an iPod touch® or iPhone®? Got a factory radio without an auxiliary input? Sony's XDP-MU110 Digital Link Sound System lets you play your iPod through your car's factory stereo system, and gives you an upgrade in overall sound quality at the same time. The system includes a digital sound processor (DSP) module, a cradle/dock, and a wireless remote control.

XDP-M110 DSP control unit

Here's how it works

You tap into the speaker wiring of your factory system, and connect the wires to inputs and outputs of the DSP module. The DSP unit contains a built-in 4-channel amplifier that almost doubles the power found in most factory radios, bringing new clarity and excitement to your tunes. It features controls for optimizing the sound for your vehicle's specific size and shape, so you can be sure you'll get balanced, full-sounding music throughout your ride. The module also includes three sets of preamp outputs, handy for connecting outboard amplifiers.

XDP-M110 cradle

This cradle will dock

You can mount the cradle, and its cable, onto your dash to dock your device in a convenient position for hands-on or hands-free play. The heavy-duty suction cup holds the cradle to your dash securely, but has a quick-release for easy removal. The cradle also contains a remote control sensor, manual volume control, seek and source selector buttons, and DSP status indicator lights, to help oversee the system. A wireless remote lets you control everything safely, with only a quick glance every now and then.

RM-X251 Card remote commander

Other uses

If you own a classic car and you don't need AM/FM reception, you should take a look at this system. You can install the hideaway module somewhere out of sight, and mount the cradle in a convenient spot. You'll be able to play your iPod through your car's speakers, and adjust your settings with the remote. Best of all, the original radio stays in place, so your car shows well and maintains its value. This system would also work well in buses, recreational vehicles, and many other applications where you don't need an in-dash receiver.

READ LESS

Product highlights:

  • iPod touch/iPhone integration for factory sound systems
  • package includes DSP (digital sound processor) master unit, cradle for iPhone or iPod touch, and wireless remote
  • DSP module:
    • optimizes sound settings based on your vehicle's size
    • accounts for whether you have a subwoofer or not
    • 4-channel internal amplifier (17 watts RMS x 4 at 4 ohms)
    • includes input and output/power harnesses
    • dimensions: 8-3/8"W x 1-5/8"H x 7-1/16"D
  • cradle:
    • Apple®-certified dock works with iPhone (2G/3G/3GS/4/4S) and iPod touch (1st/2nd/3rd/4th gen)
    • suction cup support holds tight to most flat surfaces
    • quick-release lever allows for easy removal
    • manual volume control, and seek and select source buttons
    • DSP status indicator lights and remote sensor
    • includes cradle cable and cord clamps
    • approximate dimensions: 2-5/8"W x 5-1/2"H x 4-1/4"D
  • RM-X251 wireless remote:
    • volume, fade, balance, treble, bass
    • subwoofer level control
    • source selection
    • Automatic Level Optimzer
  • warranty: 1 year
  • MFR # XDP-MU110

What's in the box:

  • DSP Master Unit (XDP-MU110)
  • iPod/iPhone cradle (XA-C100IP)
  • 8' Cradle cable (with a proprietary 13-pin connector on one end and a proprietary multi-pin connector on other end)
  • 8' Wiring harness
  • 8' Speaker-level input harness
  • IR remote control (RM-X251)
  • CR2025 3V lihthium battery (installed in remote)
  • Mounting sheet
  • 3 Self-adhesive cord clamps
  • Strap
  • Cleaning sponge
  • 4 Mounting screws
  • 10A ATC fuse (installed in DSP master unit)
  • Operating Instructions (En/Sp)
  • Installation/Connections Guide (En/Sp)
  • Note on the suction cup of the cradle
  • Warranty Sheet

Customer reviews for Sony XDP-MU110 Digital Link Sound System

Loading reviews...

Average review:

4.5 out of 5 stars
62 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Sony XDP-MU110 Digital Link Sound System

Stacey B.

Product Research

System Overview
Audio Features
iPod/iPhone Integration
Remote Control

System Overview

Digital Link Sound System: The Sony Digital Link Sound System (XDP-MU110) allows you to integrate select iPods or iPhones into your vehicle's existing factory audio system. You can enjoy great sound from your factory car stereo and compatible iPod/iPhone via the Digital Link Sound System, which features sound settings optimized for your vehicle by using Sony digital sound technology. The Sony Digital Link Sound System (XDP-MU110) consists of a hide-away DSP master unit & iPod/iPhone cradle, plus installation wiring harness and cable.

DSP Master Unit: The hide-away DSP master unit features a built-in 17 watts x 4 channel amplifier and also includes 6-channel 2-volt preamp outputs to enhance your car stereo sound. The DSP master unit offers internal DSP processing for improved car audio sound suited for your type of vehicle.

iPod/iPhone Cradle: The iPod/iPhone cradle connects to the hide-away DSP master unit via an 8' cable. The iPod/iPhone cradle fits the iPod touch and iPhone, but the connector also supports the iPod classic and iPod nano. The iPod/iPhone cradle is fitted with a suction-cup mount that adheres to your vehicle's dashboard.

Audio Features

45W x 4ch Amplifier: The Sony Digital Link Sound System (XDP-MU110) is equipped with a 17 watt RMS (45 peak) x 4-channel high-power amplifier to drive your car audio speakers. The built-in amplifier improves the sound of existing factory car stereo.  

Note: CEA2006 Output Power - 17W RMS @ 4-ohms, 20Hz-20kHz, <1% THD+N.

2V/6ch Preamp Outputs: The Sony Digital Link Sound System is fitted with 2-volt Front, Rear, and Sub RCA pre-amp outputs to feed an external amplifier for even better sound. The front and rear speaker preamp outputs are balance and fade adjustable. The subwoofer preamp output is non-fading.

Speaker Level Input (w/ 2ch or 4ch mode): The Sony Digital Link Sound System connects to your vehicle's factory car stereo via speaker-level input. You can choose between a 2-channel or 4-channel mode based on the number of speakers you are connecting. Select "2ch" if you connect only the front car speakers to the DSP master unit or "4ch" if you connect your vehicle's front & rear speakers.

Internal DSP: Internal DSP processing improves both your factory audio system playback and your iPod touch or iPhone playback. This system provides well balanced sound, which appears to come from in front of the driver's seat, optimized for the vehicle type by setting the DSP master unit. The hide-away DSP Master Unit utilizes 3 multi-position switches to adjust 12 different DSP parameters, so the sound can be customized to fit your ride.

  • Vehicle Size: Select from one of three sizes (L/M/S) based on the air volume of your car.
  • Subwoofer: Select "Y" (yes) or "N" (no) depending on whether you have a separate amp & subwoofer connected to the system.
  • Subwoofer Location: Then select from one of three positions (Far/Mid/Near) based on the distance between the driver's seat and where the subwoofer is located in the vehicle.

Automatic Level Optimizer: The Automatic Level Optimizer adjusts the playback volume level of your connected iPod touch/iPhone to the optimum level.

Tone Control: The Sony Digital Link Sound System offers Bass (100Hz) & Treble (7kHz) control that is adjustable from -7dB to +7dB.

Balance/Fader: You can adjust the balance between your vehicle's left & right speakers, as well as the fade between the vehicle's front & rear speakers. The system offers a 7 step balance & fade adjustment.

Subwoofer Control: When you have connected a separate amplifier & subwoofer to the system, you can adjust the level of the subwoofer independently from the system's main volume. The subwoofer level can be adjusted from -7dB to +6dB.

iPod/iPhone Integration

iPod/iPhone Docking Cradle: The Sony Digital Link Sound System (XDP-MU110) includes an iPod/iPhone docking cradle which allows you to connect your iPod or iPhone to your factory car system. The iPod/iPhone cradle is adjustable and features a suction-cup mount. The adjustable cradle can be mounted to your dash and you can then adjust the angle of your iPod touch/iPhone.

Note: The cradle is designed to specifically fit the iPod touch (1st/2nd/3rd/4th gen) and iPhone (2G/3G/3GS/4/4S). Even though the cradle does not fit the iPod classic or iPod nano perfectly, the dock connector does support audio playback, control, and charging of these iPods. See chart below.

Audio Playback: The Sony XDP-MU110 supports audio playback of stored music from your iPod or iPhone, plus streaming music apps on your or iPhone.

Playback Control: The iPod/iPhone cradle and included IR remote control allows you to skip to the next or previous track on your docked iPod/iPhone. All advanced playback functions will be controlled from your iPod/iPhone's clickwheel or touchscreen.

Information Display: The Sony Digital Link Sound System does not feature a separate display. All song, artist, track, and playback information will still be viewed from your docked iPod/iPhone.

Charging: Your docked iPod/iPhone's battery will be charged while the Sony Digital Link Sound System is powered on. If your iPod/iPhone has no initial battery charge, then the unit will not recognize it.

iPod/iPhone Compatibility Chart: The Sony XDP-MU110 Digital Link Sound System is "Made for iPod/iPhone" compatible and supports the following iPod/iPhone model features (as of 4/24/2012):

iPod Model Generation Tested Version Media Type Control Type Display Type Charge
Audio Video Remote iPod/iPhone Artist/Song Text Track Info
dock connector 3rd n/a N N N N N N N
clickwheel
color
4th n/a N N N N N N N
mini 1st n/a N N N N N N N
2nd n/a N N N N N N N
video 5th n/a N N N N N N N
classic 80GB 1.1.2 Y N Skip Tracks only Y iPod only iPod only Y
120GB 2.0.1 Y N Skip Tracks only Y iPod only iPod only Y
160GB 2.0.4 Y N Skip Tracks only Y iPod only iPod only Y
nano 1st n/a N N N N N N N
2nd 1.1.3 Y N Skip Tracks only Y iPod only iPod only Y
3rd 1.1.3 Y N Skip Tracks only Y iPod only iPod only Y
4th 1.0.4 Y N Skip Tracks only Y iPod only iPod only Y
5th 1.0.2 Y N Skip Tracks only Y iPod only iPod only Y
6th 1.1 PC Y N Skip Tracks only Y iPod only iPod only Y
touch 1st 2.2.1 Y N Skip Tracks only Y iPod only iPod only Y
2nd 4.2.1 Y N Skip Tracks only Y iPod only iPod only Y
3rd 5.0.1 Y N Skip Tracks only Y iPod only iPod only Y
4th 5.1 Y N Skip Tracks only Y iPod only iPod only Y
iPhone 2G 3.1.3 Y N Skip Tracks only Y iPhone only iPhone only Y
3G 4.2.1 Y N Skip Tracks only Y iPhone only iPhone only Y
3GS 4.3.5 Y N Skip Tracks only Y iPhone only iPhone only Y
4 5.1 Y N Skip Tracks only Y iPhone only iPhone only Y
4S 5.1 Y N Skip Tracks only Y iPhone only iPhone only Y
iPad 1 n/a N N N N N N N
2 n/a N N N N N N N

Note: Green = Perfect Fit & Control. Blue = Partial Fit & Control. Apple iPod/iPhone software updates may change functionality results. If you download a newer software version, you may need to reset the device and your iPod/iPhone to regain functionality. If this doesn't work, you may need to revert to the older software version or wait until a newer software update is available.

Remote Control

IR Remote: The included wireless remote (RM-X251) lets you control the basic functions of the XDP-MU110. Remote control functions include:

  • On/Off
  • Source
  • Balance/Fade control
  • Tone control (Bass & Treble)
  • Automatic Level Optimizer
  • System Volume
  • Subwoofer Volume
  • Track skip (next/previous)

Loading accessories...

Customer Q&A

Loading articles...

Compare the sound