Specials Outlet
Sony XM-D9001GTR Mono subwoofer amplifier 
900 watts RMS x 1 at 2 ohms

Sony's Xplod amps combine form and function in a mix that'll make your system look and sound great. On the outside, the sleek inverted heat sink keeps vital internal components running cooler and lasting longer. Removable terminal covers keep all the wire connections protected and out of sight for a clean-looking installation.

Underneath the hood, the XM-D9001GTR mono amplifier delivers 550 watts to a single 4-ohm sub, or 900 watts to a pair of subs — plenty of power for even the most demanding subwoofers. Signal-sensing speaker-level inputs activate the amp automatically when it's connected to a factory radio, so there's no remote turn-on lead for you to install.

You can adjust the frequency filter to tailor the signal going to your subs, while a bass boost adds extra punch to the lows. Preamp outputs simplify setup when it's time add another amp to your system.

Get more info on this product

Details:

  • mono subwoofer amplifier
  • 550 watts RMS x 1 at 4 ohms (900 watts RMS x 1 at 2 ohms)
  • 2-ohm stable
  • low-pass crossover (50-300 Hz, 12/24 dB/octave)
  • variable bass boost (0-10 dB at 40 Hz)
  • MOSFET outputs and power supply
  • CEA-2006 compliant
  • speaker-level inputs with high-level sensing
  • preamp inputs and outputs
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • 15-13/16"W x 2-3/16"H x 10-13/16"D
  • warranty: 1 year
  • Want more peace of mind? Extended Service Plans Available

Top of page

Sony XM-D9001GTR

Mono subwoofer amplifier
900 watts RMS x 1 at 2 ohms

Item #158XM9001
DISCONTINUED
Item Discontinued

Contact us for advice

Recommended Accessories

Amplifier Wiring Kits
Amplifier Wiring Kits
Kits make it easier and less expensive to install your new amplifier. Kits include power cable, a fuse, fuse holder, ground cable, turn-on lead, and more. Note: Wiring not included with the amp.
Capacitors
Capacitors
Protect your charging system and improve your bass with a capacitor. Ground cable and connectors required (not included).
Speaker Connectors
Speaker Connectors
Using these connectors to hook up the speaker wire to your amp will keep the installation clean.
Stereo Patch Cables
Stereo Patch Cables
Patch cables take the music from your stereo to the amplifier. Some kits don't include them, and you can always get better quality cables like these separately.
More Accessories

What's in the box?

Download owner's manual

  • Mono amplifier with three 30A fuses inserted into the chassis
  • 7.5" Speaker-level input harness (with 4-pin Molex plug on one end)
  • 4 Hex-head self-tapping screws
  • Operating instructions (English/French)
  • Warranty sheet