Skip Navigation

Sony XM-N502

2-channel car amplifier — 65 watts RMS x 2

2 Reviews | 4 questions - 5 answers

Overview

Our take on the Sony XM-N502

Bored with your vehicle's sound system? Sony's XM-N502 2-channel amplifier will add clarity and power to your system, delivering 65 watts RMS to each of your speakers, so you'll have more fun listening to music on the road. To add some low-frequency fun, you can bridge the MX-N502 amp into 1-channel mode and drive a subwoofer with 175 watts.

Sony delivers the sound

Bored with your vehicle's sound system? Sony's XM-N502 2-channel amplifier will add clarity and power to your system, delivering 65 watts RMS to each of your speakers, so you'll have more fun listening to music on the road. To add some low-frequency fun, you can bridge the MX-N502 amp into 1-channel mode and drive a subwoofer with 175 watts.

A low-pass filter helps your sub sound its best. Sony placed all of the MX-N502's connections and controls on the front of the amp, for a cleaner installation with easier access to adjustments. To protect the amp from overheating and shutting down, an Auto Thermal Control lowers the power output slightly during those moments of extreme, hard driving play. Sony shows its commitment to high quality by gold-plating this amp's connectors for reliable conductivity.

Sony XM-N502

XM-N502 connection and control panel

Big boy panties requie Bigg amps so go with a tre 2002 or bigger Tor speaker poping power

Larry L, Inglefield, IN

What's in the Box:

  • 2-channel amplifier
  • 25-amp ATO fuse (installed)
  • Four 3/4" Self-tapping screws
  • Power terminal protective cover
  • Operating instructions (English/ Spanish)
  • Warranty information

Product Highlights:

  • 2-channel car amplifier
  • 65 watts RMS x 2 at 4 ohms (85 watts RMS x 2 at 2 ohms)
  • 175 watts RMS x 1 in bridged mode (4-ohm stable in bridged mode)
  • CEA-2006 compliant
  • Class AB amp technology
  • selectable low-pass filter (80 Hz, 18 dB/octave)
  • preamp inputs
  • MOSFET power supply
  • Auto Thermal Control lowers output to prevent shut-down
  • fuse rating: 25A x 1
  • 10-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • 10-11/16"W x 2-3/16"H x 7-5/16"D
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Sony XM-N502 Reviews

Average Customer Review:

2 Reviews

Sony XM-N502

Written by: Larry L from Inglefield, IN on April 13, 2015

Big boy panties requie Bigg amps so go with a tre 2002 or bigger Tor speaker poping power

Pros:

Cons: Needs a power Cap for full capassity

Sony XM-N502 2-channel amp.

Written by: tony from Cottonwood, Ca. on October 5, 2014

Crutchfield Customer Review (What's this?)

Excellent amplifier, quality sound.

Pros: Easy to install nice and compact for limited space.

Cons: None

Details

Hands-on research

What's in the box?

Download the Sony XM-N502 manual

  • 2-channel amplifier
  • 25-amp ATO fuse (installed)
  • Four 3/4" Self-tapping screws
  • Power terminal protective cover
  • Operating instructions (English/ Spanish)
  • Warranty information

Product Research

Features

CEA-2006 Compliant: CEA-2006 is a system of testing and measurement methods for mobile audio amplifiers. This voluntary standard advocates a uniform method for measuring an amplifier's RMS power output and signal-to-noise ratio. The criteria for measuring power uses a DC input voltage of 14.4 volts and the RMS power output is measured into a 4Ω load, with 1% or less Total Harmonic Distortion plus noise (THD+N), and over a frequency range of 20 Hz to 20 kHz (for full range amplifiers). Signal-to-Noise ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4Ω. CEA-2006 standards allow consumers to compare amplifiers on an equal basis. Using CEA-2006 criteria, the Sony XM-N502 is rated at 65 watts RMS x 2 channels, with a 93 dBA signal to noise ratio.

Pulse Power Supply: The amplifier utilizes a Pulse Power Supply system to regulate the fluctuating voltage received from the car's electrical system.

LPF: A two position switch turns the low pass filter (LPF) on/off, the crossover point is fixed at 80 Hz and the slope is 18 dB/octave.

Power Connections: The power, ground, and remote turn-on screw terminals are 0.35" wide. A Phillips-head or flat blade screw driver (not included) is required to tighten/loosen the terminals. A protective cover is included for the power/ground/remote terminal block.

Speaker Connections: The speaker screw terminals are 0.35" wide. A Phillips-head or flat blade screw driver (not included) is required to tighten/loosen the terminals.

RCA Input: The amplifier features one pair of stereo RCA line level inputs (left/right).

Fuse: The amp is protected by a single 25-amp ATO blade fuse.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

4 questions already asked

I forwarded your question to an Advisor and they responded with the following: There is no need to use wire that big with this amp, but you can use it as long as you put a terminal on the end of the wire. I don't expect the amp's inputs to take wire that big. By the way, that's a good match on this amp with those speakers! If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat. [ Krissy  Aug 17, 2015 ]  Staff
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Krissy  Feb 03, 2015 ]  Staff
Sony [ Cecil W.  Jan 05, 2015 ]
Thanks for your question. For information on comparing two or more models I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences and help you make the best choice for your system and your budget. [ Krissy  Jan 05, 2015 ]  Staff
Library