Skip Navigation

AudioControl 2XS

Stereo 2-way electronic crossover (White)

8 Reviews

Item #: 1612XSW

Low Stock

Was: $129.99

Sale: -$26.00 Sale ends 10/1

Add to Cart

Ask an expert

Our VA-based experts can help.

1.888.955.6000

ChatEmail

Add to Cart

$103.99

Overview

Our take on the AudioControl 2XS

In a 2-way audio system, the mids and highs get the high-pass signal while the subwoofer gets bass. You amplify each signal separately, resulting in greater power handling and sonic clarity. AudioControl's 2XS 2-way crossover uses a steep 18 dB per octave slope to separate the high and low frequencies, along with a built-in line driver that'll beef up the signal so your amplifiers will have something clean and powerful to work with.

Feed your amps the right signals in your 2-way system

In a 2-way audio system, the mids and highs get the high-pass signal while the subwoofer gets bass. You amplify each signal separately, resulting in greater power handling and sonic clarity. AudioControl's 2XS 2-way crossover uses a steep 18 dB per octave slope to separate the high and low frequencies, along with a built-in line driver that'll beef up the signal so your amplifiers will have something clean and powerful to work with.

High- and low-pass filters

The 2-way crossover features one set of inputs and two sets of outputs: high-pass and low-pass. You can change the preset 90 Hz crossover point by installing another AudioControl module, or by modifying the module installed in your 2XS. A built-in filter removes subsonics from your signal so your amps and subs will play more efficiently.

Simple to set up and adjust

Once connected, the 2XS makes it simple to attain a strong and balanced signal for your amplifier — you adjust the levels for 1-volt or 3-volts minimum RMS output and for smooth-sounding response. Balanced inputs reject noise caused by your vehicle's electrical system, but internal switching gives you other options for dealing with ground loops.

Comes with great instructions, is easy to install and easy to adjust.

Borowillis, Shreveport , LA

What's in the Box:

  • 2-Way active crossover (white)
  • Owner's manual
  • QC checklist
  • Product registration card

Product Highlights:

  • 2-way electronic crossover (90 Hz at 18 dB/octave)
  • white steel chassis with gold-plated RCA jacks
  • line driver with adjustable output (up to 9 volts)
  • top-mounted controls for easy adjustment
  • balanced inputs eliminate noise
  • frequency response: 15 to 20,000 Hz
  • signal-to-noise ratio: 115 dB
  • maximum output level: 9.5 volts
  • fuse rating: 1 amp
  • size: 5-1/2"H x 4-11/16"W x 1-3/16"D
  • weight: 2 pounds
  • warranty: 5 years
  • Our 60-day money-back guarantee
Reviews

AudioControl 2XS Reviews

Average Customer Review:

8 Reviews

Great Crossover

Borowillis from Shreveport , LA on 12/22/2015

Crutchfield Customer Review (What's this?)

Comes with great instructions, is easy to install and easy to adjust.

Pros: Easy to install and adjust. Excellent way to add a powered subwoofer to your system.

Cons: None indentified.

very good

suzaku from Texas on 9/1/2015

Crutchfield Customer Review (What's this?)

an excellent unit built to last.

Pros: Very clear sound, and precise freq control via modules.

Cons: Could be better if it had remote bass control

Cross over

Audio control 2xs from Lincoln, NE on 5/31/2015

Crutchfield Customer Review (What's this?)

Excellent for sub use but okay for total use if u want mid bass u have to use another crossover setup

Pros: Excellent for sub use

Cons: Poor for a primary crossover

Control Audio

Israel from Hormigueros, Puerto Rico on 3/20/2015

Crutchfield Customer Review (What's this?)

this is how the boys get separate from the mens

Pros: Clear sound

Cons: Nop

AUDIOCONTROL 2XS CROSSOVER

DENNIS C. from BLYTHEVILLE AR. on 7/5/2013

Crutchfield Customer Review (What's this?)

I love it! It sounds great & does not take up a lot of space. Much better than the kicker front row crossover.

Pros: Sounds great! Very small . AudioControl makes great stuff!

Cons: NONE

Great X-over

AOei from Pacific Palisades, CA on 5/5/2013

Crutchfield Customer Review (What's this?)

This is my second 2XS purchase for yet another car. Works just fine and as advertised by the manufacturer. Biggest positive is the configurable X-over point. Really simple to do if you get a 14pin DIP socket... no need to solder the resistors... just cut the leads shorter, bend, and insert into the socket holes; the resistors aren't going anywhere... no matter how much the 2XS shakes!

Pros: Quality of construction and configurability.

Cons: None except maybe the cost... but sometimes you just have to pay to play!

Great for home audio too.

Dan R from Minneapolis, MN on 2/27/2013

I use a resistor module to change the crossover frequency from 90 hertz to 130. Homemade sealed sub cabinets with Rockford 15 inch Punch subs make a great sounding home system. Power the 2XS with a 12V wall plug in transformer, and you're good to go. AudioControl products are made near Seattle, and are really well constructed.

Pros: You can control both low pass and high pass outputs to perfectly balance the sub(s) and speakers. By not having a variable crossover design, the sound is as pure as can be. 3rd order, or 18 dB/octave, takes out low frequency signals from the speakers sharply below the crossover point, and lets you play music at fairly loud levels without distortion from speakers that can't handle much below 70 hertz - basically all bookshelf speakers. This is especially important at 90 hertz.

Cons: Absolutely none!

AUDIOCONTROL 2XS-grey

Jerred from Lovell, WY. on 9/18/2010

Crutchfield Customer Review (What's this?)

Audiocontrol is a great product!! Easy setup!!! 2XS has made a huge difference in my car stereo!!!!

Pros:

Cons:

Details

Hands-on research

Product Research

Features

Crossover: The crossover point between the high-pass and low-pass outputs is 90 Hz and the crossover slope is 18 dB/octave. The crossover point is governed by a replaceable chip, so it can be modified.

Subsonic Filter: The subsonic filter crossover point is 33 Hz and the crossover slope is 18 dB/octave. The crossover point is governed by a replaceable chip, so it can be modified.

Line Driver: The adjustable output levels allow you to increase the head unit's line voltage to the top of your amp's input range; up to 9.5 volts RMS/13 volts peak. The output voltage is proportional to the input voltage; approximately 5.6 volt RMS input is required to drive 9.5 volts RMS output.

Balanced Inputs: Using the balanced differential input circuit cancels noise picked up in the transmission line between the 2XS and the source unit.

Ground Isolation: The power supply ground is switchable, in case of ground loop noise. The factory position is fully isolated (typically the best choice), but can be changed to Ground or 200Ω.

Terminal Blocks: The power/ground/remote terminal is removable; the wiring is attached to the terminal block, then the block is plugged into the 2XS. The terminal block will accommodate wire up to 12 gauge.

Inputs and Outputs:

  • Line Input: stereo RCA, balanced
  • High-Pass Output: stereo RCA, frequencies above 90 Hz
  • Low-Pass Output: stereo RCA, frequencies below 90 Hz
  • Power Input: removable terminal block

Specifications:

  • Maximum Output: 9.5 volts RMS/13 volts peak
  • Frequency response: 15 Hz-20 kHz; ±1 dB
  • THD: 0.005%
  • S/N Ratio: 115dB

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

i like audio control products [ Jerry  Sep 09, 2016 ]
Library