Skip Navigation

AudioControl EQS

6-channel 13-band graphic equalizer (Gray)

4 Reviews | 1 question - 1 answer

Item #: 161EQSG

This item is no longer available.

Original Price: $279.99

Shop all Car Equalizers & Signal Processors

Add to Cart

$279.99

Overview

Our take on the AudioControl EQS

AudioControl's EQS graphic equalizer will help make your music sound fantastic in your car. This versatile 6-channel equalizer features 13 bands of adjustment for sonic fine tuning, along with level controls that allow you to match any receiver to any amplifier. Speaker-level inputs let you connect your EQS to just about any car stereo, even to factory amps that put out up to 100 watts.

Fine tune the sound for your speakers and subs

AudioControl's EQS graphic equalizer will help make your music sound fantastic in your car. This versatile 6-channel equalizer features 13 bands of adjustment for sonic fine tuning, along with level controls that allow you to match any receiver to any amplifier. Speaker-level inputs let you connect your EQS to just about any car stereo, even to factory amps that put out up to 100 watts.

Equalization bands

Most car audio problems occur in the bass frequencies, so this processor's subwoofer channel gives you six bands of equalization between 31.5 and 100 Hz, along with a rolloff filter that keeps ultra-low frequencies away. The front and rear channels feature seven bands of equalization at varying intervals from 250 Hz up to 10,000 Hz. If you're not using the sub channel, the low-frequency EQ section switches to the rear channel automatically.

Level matching for max performance

The EQS connects between your receiver and amplifiers (or crossovers) using its inputs and outputs for your system's front, rear, and subwoofer channels. Once connected, the EQS makes it simple — turn up the input gain knobs, adjust the output knobs until the lights indicate the desired output, and you're all set. You can adjust the output level up to 9.5 volts, so you can be sure your amps will get plenty of signal. 

This item is a must for those with discerning taste when it comes to thier auto audio system.

The Dude, Phoenix, AZ

What's in the Box:

  • Pre-amp 6-Channel Equalizer (gray)
  • Owner's manual
  • QC checklist
  • Product registration card

Product Highlights:

  • dual 13-band equalizers with level matching controls
  • gray steel chassis with gold-plated RCA jacks
  • line driver increases signal up to 18 dB (up to 9.5 volts RMS)
  • 6-channel preamp inputs and outputs (front, rear, and subwoofer)
  • speaker-level inputs for easy connection to factory radio
  • top-mounted controls for easy adjustment
  • balanced inputs eliminate noise (switchable to unbalanced)
  • 33 Hz subsonic filter eliminates extreme low bass (rolloff point can be adjusted with optional module)
  • EQ points: 31.5, 45, 63, 90, 125, 180, 250, 500, 1000, 2000, 4000, 8000, 16000 Hz
  • frequency response: 10 to 100,000 Hz
  • signal-to-noise ratio: 110 dB at full output
  • fuse rating: 2 amps
  • size: 8-13/16"H x 9-5/16"W x 1-5/16"D
  • weight: 3-1/4 pounds
  • warranty: 5 years
  • Our 60-day money-back guarantee
Reviews

AudioControl EQS Reviews

Average Customer Review:

4 Reviews

5202905555

The Dude from Phoenix, AZ on 9/8/2013

This item is a must for those with discerning taste when it comes to thier auto audio system.

Pros: Ease of use

Cons: i can not think of any

A must have!

gupper from buffalo ny on 6/30/2013

Crutchfield Customer Review (What's this?)

I have a 2013 Toyota Avalon and wanted to upgrade my audio system without replacing the factory head unit. I installed a JL Audio cleansweep dsp and matched that up with the EQS. What a nice combination. I used a JL Audio Slash 300/4 v3 for my front and rears and a xd 600/1 for my sub (tw5v2). Between the output voltage boost and the equalizer functions, the EQS gave me the ability to modify my sound the way I had envisioned.

Pros: Nice piece of hardware plenty of flexibility for sound preferences easy install

Cons: None

Pretty good

ernie from San Pedro, CA on 11/4/2012

I've been using the EQS for 2 years now and It has been very reliable. For what this unit does, it does very well and I have no complaints. If you are like me and don't want to spend a ton on an expensive DSP this is a very good compromise. The line driver on this plus EQ is really worth the price you pay, the signal is very strong and very clean. EQS makes it dummy proof to set this up and get going, especially with the clipping lights. To sum it up if your looking for some eq on a budget and don't want to get a DSP (Digital Signal Processor) than this is the next best thing. Pros: Build quality and sound plenty of bands for adjustment small form factor Cons: none for me

Pros:

Cons:

Perfect for factory head units

Keith from Marrero, LA on 2/4/2012

Crutchfield Customer Review (What's this?)

Nice unit with lots of equalization and tuning options. I was running speaker level inputs so this was perfect to clean up the signal. I had never heard of them so my trust in the Crutchfield advisor was how I based my decision.

Pros: Lots of signal processing options. You can get a really nice sound from the factory head unit with this processor.

Cons: It takes a bit of tinkering to get the sound right and any bugs out of it. I had a whine which I was able to phase out by lowering the amp gains to their lowest setting and adjusting the input and output on the processor. The manual said to start by setting the volume to 3/4, but I set it at about half way up then connected everything and cranked it up. Then I set my equalizer settings, & I have not touched it since. It did take about a week of listening to set it to where I have it now,

Details

Hands-on research

Product Research

Features

Description: The EQS is a 6-channel equalizer/line driver. There are are dedicated 7-band graphic equalizers for the front and rear outputs, and a 6-band graphic equalizer for the subwoofer output.

Dual Bandwidth Equalization: A total of 13 bands are available over two bandwidths:

  • Front/Rear EQ: Two 7-band equalizers feed the front and rear outputs; the center frequencies of both are 120 Hz, 160 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, and 10 kHz. The rotary knobs adjust the signal +/-12 dB. There's a notch at each knob's center position so it's easy to return to the flat setting.
  • Subwoofer EQ: A 6-band 1/3 octave equalizer feeds the subwoofer outputs; the center frequencies are 31.5 Hz, 40 Hz, 50 Hz, 63 Hz, 80 kHz, and 100 kHz. The rotary knobs adjust the signal +/-12 dB. There's a notch at each knob's center position so it's easy to return to the flat setting.

Line Driver: To achieve the best possible signal to noise ratio and dynamic range from your amplifier, the built-in line driver can increase the head unit's output voltage up to 18 dB (9.5 volts RMS/13 volts peak).

Input Gain: The input gains for the front, rear, and sub channels are set independently. The range is adjustable +/-12 dB to match the source output to the EQ input.

Output Level: The +20 dB maximum output level allows you to increase the head unit's line voltage to the top of your amp's input range; up to 9.5 volts RMS/13 volts peak.

Balanced Inputs: Using the balanced differential input circuit cancels noise picked up in the transmission line between the EQS the the source unit.

Ground Isolation: The power supply ground is switchable, in case of ground loop noise. The factory position is fully isolated (typically the best choice), but can be changed to Ground or 200Ω.

Auto Select Inputs: The EQS automatically switches the inputs to maximize the equalization controls, whether you use two, four, or six preamp inputs.

Speaker Level Inputs: The 4-channel speaker level inputs are compatible with most factory installed radios, even most Bose systems.

Terminal Blocks: The power/ground/remote terminal and the speaker level input terminals are removable; the wiring is attached to the block, then the block is plugged into the EQS. The terminal block will accommodate wire up to 12 gauge.

Subsonic Filter: The subsonic filter crossover point is 33 Hz. The crossover point is governed by a replaceable chip, so it can be modified.

Specifications:

  • Maximum Line Input: 15 volts RMS
  • Maximum Speaker Level Input: 100 watts/channel
  • Maximum Output: 9.5 volts RMS/13 volts peak
  • Frequency response: 10 Hz-100 kHz; ±1 dB
  • THD: 0.003%
  • S/N Ratio: 110dB
  • Balanced Input Noise Rejection: 60 dB
  • Input Impedance: 20 kΩ
  • Output Impedance: 150 ohms

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

1 question already asked

Thanks for your questions. For information on selecting the best gear for your system I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences and help you make the best choice for your system and your budget. [ Krissy  Jan 26, 2014 ]  Staff
Library