Trunk-mount 6-channel equalizer and line driver (White)
Item #: 161EQSW
Your price: $349.99 Earn up to 350 Rewards points
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Item #: 161EQSW
Your price: $349.99 Earn up to 350 Rewards points
AudioControl designed the EQS for one reason to make your car audio system sound better. This rugged 6-channel equalizer features 13 bands of adjustment for sonic fine tuning, along with a line driver that allows you to send the cleanest possible signal to your amplifiers. And speaker-level inputs allow you to connect the EQS to just about any car stereo, even Bose® systems and factory amps up to 400 watts.
The EQS features inputs and outputs for your front, rear, and subwoofer channels, fitting between your receiver and your amplifiers in the signal chain. Once connected, the EQS makes it easy turn up the input gain knobs, adjust the output knobs until the light indicates the desired output, and you're all set. You can adjust the output level up to 9.5 volts, so you can maximize the performance of any amplifier.
Most car audio problems occur in the bass frequencies, so the subwoofer channel gives you six bands of equalization between 31.5 and 100 Hz, along with a rolloff filter that keeps inaudible subsonic bass out of your subwoofer system. You also get seven bands of equalization from 120 Hz all the way up to 10,000 Hz on the front and rear channels. If you're not using the sub channel, the low-frequency EQ section switches to the rear channel automatically.
Balanced inputs reject noise caused by your vehicle's electrical system, but you have the option of grounding your inputs to solve ground loop problems.
The EQS is designed to work with a variety of systems, whether it's tied directly into a single amp or connected to an AudioControl crossover in a multi-amp setup. Check out the system diagrams in More Photos.
This item is a must for those with discerning taste when it comes to thier auto audio system.
Pros: Ease of use
Cons: i can not think of any
I have a 2013 Toyota Avalon and wanted to upgrade my audio system without replacing the factory head unit. I installed a JL Audio cleansweep dsp and matched that up with the EQS. What a nice combination. I used a JL Audio Slash 300/4 v3 for my front and rears and a xd 600/1 for my sub (tw5v2). Between the output voltage boost and the equalizer functions, the EQS gave me the ability to modify my sound the way I had envisioned.
Pros: Nice piece of hardware plenty of flexibility for sound preferences easy install
I've been using the EQS for 2 years now and It has been very reliable. For what this unit does, it does very well and I have no complaints. If you are like me and don't want to spend a ton on an expensive DSP this is a very good compromise. The line driver on this plus EQ is really worth the price you pay, the signal is very strong and very clean. EQS makes it dummy proof to set this up and get going, especially with the clipping lights. To sum it up if your looking for some eq on a budget and don't want to get a DSP (Digital Signal Processor) than this is the next best thing. Pros: Build quality and sound plenty of bands for adjustment small form factor Cons: none for me
Nice unit with lots of equalization and tuning options. I was running speaker level inputs so this was perfect to clean up the signal. I had never heard of them so my trust in the Crutchfield advisor was how I based my decision.
Pros: Lots of signal processing options. You can get a really nice sound from the factory head unit with this processor.
Cons: It takes a bit of tinkering to get the sound right and any bugs out of it. I had a whine which I was able to phase out by lowering the amp gains to their lowest setting and adjusting the input and output on the processor. The manual said to start by setting the volume to 3/4, but I set it at about half way up then connected everything and cranked it up. Then I set my equalizer settings, & I have not touched it since. It did take about a week of listening to set it to where I have it now,
Description: The EQS is a 6-channel equalizer/line driver. There are are dedicated 7-band graphic equalizers for the front and rear outputs, and a 6-band graphic equalizer for the subwoofer output.
Dual Bandwidth Equalization: A total of 13 bands are available over two bandwidths:
Line Driver: To achieve the best possible signal to noise ratio and dynamic range from your amplifier, the built-in line driver can increase the head unit's output voltage up to 18 dB (9.5 volts RMS/13 volts peak).
Input Gain: The input gains for the front, rear, and sub channels are set independently. The range is adjustable +/-12 dB to match the source output to the EQ input.
Output Level: The +20 dB maximum output level allows you to increase the head unit's line voltage to the top of your amp's input range; up to 9.5 volts RMS/13 volts peak.
Balanced Inputs: Using the balanced differential input circuit cancels noise picked up in the transmission line between the EQS the the source unit.
Ground Isolation: The power supply ground is switchable, in case of ground loop noise. The factory position is fully isolated (typically the best choice), but can be changed to Ground or 200Ω.
Auto Select Inputs: The EQS automatically switches the inputs to maximize the equalization controls, whether you use two, four, or six preamp inputs.
Speaker Level Inputs: The 4-channel speaker level inputs are compatible with most factory installed radios, even most Bose systems.
Terminal Blocks: The power/ground/remote terminal and the speaker level input terminals are removable; the wiring is attached to the block, then the block is plugged into the EQS. The terminal block will accommodate wire up to 12 gauge.
Subsonic Filter: The subsonic filter crossover point is 33 Hz. The crossover point is governed by a replaceable chip, so it can be modified.
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Crutchfield car A/V editor and longtime musician Charlie put a new system in his convertible a little while back, and while his sound vastly improved it was missing something at first. After tuning...
Thanks for your questions. For information on selecting the best gear for your system I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences and help you make the best choice for your system and your budget. [ Krissy Jan 26, 2014 ] Staff