1-888-955-6000
crutchfield.com
Crutchfield

AudioControl LCQ-1

6-channel line output converter with equalizer — add amps to your factory system (Gray)

Zoom
  • AudioControl LCQ-1

    Front

  • AudioControl LCQ-1

  • AudioControl LCQ-1

Crutchfield OMC logo
We don't check this item for fit or compatibility.
 

Our take on the AudioControl LCQ-1

by Buck Pomerantz
AudioControl

AudioControl's LCQ-1 six-channel signal processor lets you bridge the gap between your factory stereo and the high performance power of aftermarket amplifiers, speakers, and subs. It accepts speaker-level signals from your factory radio or amplifier and lets you custom tune the output to achieve audiophile performance in your car. You'll keep all the features of your car's audio system, like navigation and Bluetooth®, and maintain your car's showroom look, while enjoying performance that a factory sound system can only dream about.

Inputs and outputs
The LCQ-1 features six speaker-level inputs that accept the amplified output of your existing factory system. The LCQ-1 sums all the signals you send it, even if they're actively crossed over by your factory system, so you get a strong, full-range signal for your processors and amps. The LCQ-1's 6-channel RCA preamp outputs connect to up to three external amplifiers. The optional dash-mount remote control allows you to adjust the level of your sub channel on the go.

Serious equalization for seriously good sound
The LCQ-1 lets you get the sound you want, whether you like your sound heavy on the lows, screaming on the highs, or somewhere in-between. You'll find independent EQ for the front, rear, and sub outputs, while AudioControl's AccuBASS™ signal processing corrects factory-set bass levels that limit the full potential of your system's low end.

See more info on this item

Highlights:

  • 6-channel line output converter
  • designed to work with any factory stereo
Inputs and outputs
  • 6 high-level inputs
  • 6-channel preamp level outputs
  • independent front, rear, and sub EQ controls
  • AccuBASS signal processing
Other features
  • 12-volt turn-on lead output (turns on amp when LCQ-1 turns on)
  • internal signal summing
  • 7-15/16"W x 1-5/16"H x 6-15/16"D
  • warranty: 5 years
  • Our 60-day money-back guarantee

Hands-on research from the Crutchfield Labs (what are the Labs?)

Product Research
What's in the box?

Download owner's manual

  • 6-Channel signal processor
  • Owner's Manual
  • Quality Control note

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

Overview: The AudioControl LCQ-1 is a powerful six-channel signal processor that provides a gateway between factory installed source units and aftermarket amplifiers. It is a compact, six-channel, high-performance, OEM line-output converter with independent multichannel equalizers to custom tune your car audio system. The LCQ-1 allows you to easily "tune" your audio system & receive improved sound quality. An ideal combination of discrete equalization controls combined with AudioControl's unique OEM integration circuitry, the LCQ-1 maximizes the performance of factory installed audio systems. No longer will you have to compromise when performing basic amplifier additions to a factory installed audio system. The active circuitry used in the LCQ-1 provides dramatically better sound quality & enhances the bass response.

AccuBASS: Designed for maximum sound quality and enhanced audio performance, the LCQ-1 is the latest AudioControl processor to incorporate AccuBASS. This patent pending process automatically corrects for the bass roll-off that is common with many factory-installed audio systems. Factory installed amplifiers and woofers are (unfortunately) not designed to reproduce bass at high volumes. Car manufacturers adapt to this by taking the bass out of the signal when you turn up the volume. AudioControl developed the patent pending AccuBASS circuit to restore bass. After a quick and easy one-time setting, the AccuBASS circuit takes over the bass just as the factory system rolls off. You get smooth, seamless, and rock solid bass response regardless of volume level.

Individual Equalization Controls: To custom tune your system, the LCQ-1 gives you dedicated equalization controls for the Front, Rear, & Subwoofer outputs.

Channel Type Equalization Frequencies Level Adjustment
Front  125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 8kHz -12 to +12 dB
Rear  125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 8kHz -12 to +12 dB
Subwoofer 31.5Hz, 50Hz, 63Hz, 80Hz, 1000Hz -12 to +12 dB

6ch Speaker Level Inputs: The LCQ-1 has active, high-voltage, high-impedance (20K Ohms) speaker-level inputs that accepts signals from high power, factory installed amplifiers (up to 400 watts per channel). This means the AudioControl LCQ-1 will work with factory-installed audio systems and give you a higher-quality signal with lower noise, lower distortion, and higher output voltage. These inputs get their signals from the speaker-level outputs of your factory installed source unit or amplifier. If your source unit has front, rear, & subwoofer speaker-level outputs, connect them to the three sets of inputs on your LCQ-1.

AutoMode Input: If the source unit only has front & rear outputs, the Auto Mode circuitry in your LCQ-1 automatically routes the Channel 2 input channels to the (Channel 3) subwoofer channels.

Internal Channel Summing: The LCQ-1 employs internal channel summing for interfacing with factory installed amplifiers with built-in crossovers.  Channel summing lets you eliminate any factory-installed active crossovers. Many of today's factory stereo systems include separately amplified & crossed-over tweeters, midranges, & subs. If you are going to add aftermarket amps and speakers to the car you will need to combine (or sum) these separate signals into a single full-range signal for the new system. The LCQ-1 has the capability to combine together multiple (2, 4, or 6) input signals from the factory source unit into 2 channels. The LCQ-1 has internal jumpers that allow you to select which input signals will be summed into the Main outputs. When the jumper is moved to the "Sum" position, there will also be a corresponding green indicator light on the front of the LCQ-1.

Note: The LCQ-1 is shipped from the factory in the non-summed (separate) position.

Preamp Outputs: The AudioControl LCQ-1 is equipped with 3 stereo preamp outputs (Front/Main, Rear/Ch2, and Sub/Ch3) to connect to your aftermarket amplifier(s). Each stereo preamp output has an independent level control which allows you adjust the signal level from your factory source unit to match the input of your aftermarket amplifier(s).

GTO (Great Turn-On) Circuit: The main speaker level inputs have a signal sensing circuit (GTO) that turns the unit "On" when there's a speaker level input signal, and turns the unit off when the signal disappears.

Remote Output: The +12 volt DC remote output will trigger an amp to turn on whenever the LCQ-1 is "On". The remote's maximum current output is 1 amp.

Optional Remote Control: You can add a multi-function dash control (161ACR2, sold separately) that allows you to set the level of the subwoofer. It also has an in/out switch for the equalizer function so you can hear the system before and after your tuning changes. The ACR-2 is a multi-function remote that gives you control over the level of the Channel 3/Subwoofer output so you can balance the bass level with the rest of the system. An additional feature of the ACR-2 dash remote is that it allows the equalization to be switched in and out of the audio circuit by tapping the switch. You can hear the system before and after the EQ adjustments.

Installation: The LCQ-1 needs to be installed in the signal path between your OEM source unit (or factory amplifier) and aftermarket amplifier(s) and/or processor(s). Do not connect the LCQ-1 between the factory head unit and the factory amplifier. Locate the amplified speaker wires that are coming from your factory source unit and/or amplifier and connect them to the speaker-level inputs on the LCQ-1. In many cases you can find factory speaker leads in the rear of the vehicle or at the factory amplifier. Then use RCA connecting cables to connect the RCA outputs of the LCQ-1 to your aftermarket amplifier(s). Finally, connect +12V power and ground. The LCQ-1 has a 12-volt trigger input, but normally you will just let the GTO turn on circuit take care of that by itself.

Specifications:

  • Maximum Speaker Level Input: 400 watts
  • Maximum Output Voltage: 8.5 volts RMS
  • Output Gain: +/-12 dB
  • Frequency response: 10Hz-22kHz
  • THD: 0.01%
  • Input Impedance: 20 kΩ
  • Output Impedance: 150 Ω
  • Power Draw: 350mA
 

Product reviews from the Crutchfield Labs (what are the Labs?)

Video: What can AudioControl Gear Do For My Car Audio System?

Video: What can AudioControl Gear Do For My Car Audio System?

by Charlie Pastorfield
 
Video: What can AudioControl Gear Do For My Car Audio System?

Crutchfield car A/V editor and longtime musician Charlie put a new system in his convertible a little while back, and while his sound vastly improved it was missing something at first. After tuning...

 
Review this product
Great Gear Giveaway rewards card

Submit a review and then enter to win a $500 rewards card

AudioControl LCQ-1 Reviews

Average Customer Review:

12 people say:

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left
Filter by rating:
5 out of 5

My New LCQ-1

Written By BigTom, Vandalia, OH on Tuesday, September 17, 2013
Crutchfield Customer Review (What's this?)
 
Just bought the new LCQ-1 and installed into my 2013 Kia Forte... I must say, it's done one heck of a job! Before the LCQ-1, I had a Scoche line converter installed, which ran RCA's out to my 4-channel amp (for door speakers) and Class-D mono-block amp for the 12" Woofer. It sounded muffled and "crackly", but now with the LCQ-1, all the crisp, highs and lows come out and my car thumps like crazy! The factory door speakers actually hold up pretty good about half-way on the volume, but start to break up with alot of power, so they will need to eventually be upgraded, however, the 12" (Sony X-Plode 1200W) subwoofer pounds all day long...The AccuBass setting on the LCQ-1 really drives the lows deep and gives the factory stereo a whole new sound. I still need to make a few changes here and there, such as upgrading the door speakers, but for now, I am glad I spent the money on a quality product. Thanks Audio Control! r/ Tom
Pros:
Plenty of gain on all filters, easily connected, directions are simplified, If you have a factory stereo sharing ground on all speakers, this unit will sum the channels needed; Unit has a built in ground-loop isolator
Cons:
Unit did not come w/ remote gain control (sold separately)
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

save your dash

Written By MattS, Richmond,VA on Wednesday, August 28, 2013
Crutchfield Customer Review (What's this?)
 
In my current Mazda 3i I simply did not want to modify the dash, in comes the AudioControlLCQ-1. It sits in my glove box, where I can fine adjust it at will. It sums my speaker wires into 6 RCA lines that feed into 2 alpine amps one being a four channel and the other a mono. They rest under the front seats. I believe the ' Rux wired gain knob ' is well worth the money ! W/ it I can adjust my systems base extremely well. The Audio ControlLCQ-1 cost about a bit to have installed, so I can't make any comments on struggling w/ wires or instructions ! I am EXTREMELY happy with it, and I do not feel it sounds that much different than my older Kenwood Kac-889. If you are looking to keep your dash look/factory deck/steering wheel controls,etc.. W/o adding tons of add ons' look this up. Post script- if you do go cheaper, say w/ just a line converter? BEWARE you won't get an EQ!
Pros:
Takes a four channel factory head unit( in my case ) and sums FR.,RR., and sub, RCA lines. Has a 6 way EQ, w/ optional wired bass gain knob, can be installed in most locations
Cons:
taking the cover off can to be hard to get back on, POSSIBLY POSSIBLY you may need to replace your factory speaker wires, other than that none
Was this review helpful?    Yes | No
 
3 out of 5

LCQ-1

Written By Ryan, Peoria, AZ on Saturday, May 04, 2013
Crutchfield Customer Review (What's this?)
 
Very good product for factory integration and the equalization feature is even better, however I remain unhappy with it. My stereo can't be swapped, otherwise I would go with a new head unit in a heartbeat. If possible, go with a new head unit b/c this costs as much as one without nearly the amount of control.

I installed the system I had in a different car and with this a part of the system, the speakers sound great but the sub doesn't. I know this because my sub hit maybe 3 times harder in my old car attached to a head unit. This may be due to the fact that my factory stereo doesn't have a subwoofer output but who know, either way, I'm not terribly happy with the results even with hours of fiddling with the controls.
Pros:
Equalization, integration
Cons:
Reconstruction of the sub channel from front/rear output from factory radio is sub-par
3 out of 9 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Best option for integrated factory systems

Written By Ben, Fairborn, OH on Thursday, April 18, 2013
Crutchfield Customer Review (What's this?)
 
This LOC was perfect for my new vehicle. The factory stereo lacked any actual power to the speakers. I added new speakers and amps to the factory stereo. The EQ sound control was amazing. It allows you to tune it in to your liking. The factory Bass Mid Treble gave no real tuning capabilities. I was absolutely amazed at the sound this unit produced. The factory sound was lacking, but this brought the system to life. I usually get new aftermarket head units for my cars, but this is a much better option for newer vehicles with integrated controls and other amenities. The factory unit had built in Bluetooth, a USB port for mp3 media. This unit kept all of this working. And with XM built in the factory, there is no separate external antenna as with an aftermarket head unit. It was exactly what I needed. The Crutchfield support was great as well. They gave me the info on my car and the wires I needed to tie into.
Pros:
Great sound shaping and control utilizing factory stereo.
Cons:
None for my set up.
4 out of 4 people found this helpful
Was this review helpful?    Yes | No
 
4 out of 5

Works great...mostly.

Written By Tony, S. Florida on Monday, March 11, 2013
Crutchfield Customer Review (What's this?)
 
The LCQ-1 installed fairly simply in my 2013 Tacoma PreRunner Double Cab (behind the rear passenger-side, seat, along with the compact powered sub). The unit's quality is very good, and hookup was a snap. The sound improvement with the factory head unit was very noticable, especially with the ACR-2, which allows instant a/b comparison (unit in-circuit/out of circuit). The only problem I had was the GTO circuit (auto turn on by sensing input signals) is apparently too sensitive - like many newer vehicles, there is a slight ripple on the speaker leads, whether the stereo is on or off. This is not audible, but it fools the GTO into keeping the LCQ-1 (and the powered sub 4-channel pwer amp, which are both activated by the LCQ-1's remote out) on whenever the truck's ignition is on. Further, when turning the truck off, ther was a loud transient "pop" in all speakers (including the sub) a few seconds after turning the truck off. I finally had to defeat the GTO via the internal jumper, and connect the remote line to the truck's switched 12 volt supply at the fusebox. All works fine now, but Had I known, I'd have skipped the GTO circuit in the first place, saving a few hours extra work running the remote line.
Pros:
Excellent improvement in sound quality, while retaining the factory head unit's functionality and features (steering wheel controls, BlueTooth, and Hands-Free phone).
Cons:
The GTO gave me fits; AudioSource's Tech support was great, but there's only so much that can be done with a modern vehicle, and all the digital funk flying around its electrical system.
6 out of 7 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Truly great!

Written By Bob, Buford , ga on Saturday, March 09, 2013
Crutchfield Customer Review (What's this?)
 
Installed in my 12 Honda si coupe. Love it! It really opened up the mods and now my iPod sounds great through the factory head unit. Open box unit looked new, like it was opened and closed, crutchfield was great as usual, double boxes and 2 days. Not enough space to put all the pluses after the A.
Pros:
Everything!
Cons:
Wasn't free
3 out of 3 people found this helpful
Was this review helpful?    Yes | No
 
4 out of 5

Nice idea but...

Written By DaleyDriver, Palm Beach FL on Monday, September 17, 2012
Crutchfield Customer Review (What's this?)
 
This device works very well - it provides a way to CLEANLY interface with a factory head unit. And the basic eq functions is a welcome addition to smoothing out the frequency response of the cabin. All in all, a great value for the money and a very strong performer.

So what's the problem? It comes down to the manual and marketing materials. Both would have you believe that you can take a few as 2 channels of input and turn that into 6 channels of output (front, rear and sub) and you'd waste 2 hours on a rainy Sunday night trying in vain to troubleshoot your sub amp, woofers, interconnects... well you get the picture.

In order to get sub out, you must use 4 channels of input, forget what the Summed feature would lead you to think. Once past that hurdle, sonic integration bliss awaits.
Pros:
Works well, good price, flexible features that work.
Cons:
Documentation is vague with regards to those of us with only 2 channels of input. Putting the cover back on after moving internal jumpers is an exercise in patience. Get it wrong and you will break an LED or a rotary tuning knob. Cannot sum front main channel input to provide front, mid and sub outs.
7 out of 9 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Works Great!!!!

Written By Anonymous, Clovis,CA on Tuesday, August 14, 2012
Crutchfield Customer Review (What's this?)
 
Got this for my 08 Acura TL with Navigation works great. I still have all my factory functions of my head unit and steering wheel controls.
Pros:
Does what it says
Cons:
None
3 out of 3 people found this helpful
Was this review helpful?    Yes | No
 
2 out of 5

Not worth the cost

Written By Luke R., Raleigh, NC on Tuesday, May 01, 2012
Crutchfield Customer Review (What's this?)
 
This unit appeared to be exactly what I needed to retain my stock head unit and add an aftermarket amplifier. However, the unit does not fully work as advertised. My head unit has no amplifier turn-on lead, meaning that when the ignition switch is on, the LCQ-1 and amp are always on. But wait, the LCQ-1 has the ability to turn itself on by sensing an incoming signal from its speaker inputs. Great idea. Too bad it doesn't work. I tried two of these units and neither would recognize the source signal and power up. The Audio Control technical support was great but none of their suggestions to get it working the way I wanted succeeded. I wound up installing a switch in my dash to turn the loc off when I am not listening to my stereo. My other gripe about this unit is that it is noisy. I thought my amp was generating transistor hiss during idle. Turns out it is the LCQ-1. With the car off, the head unit off, and just the loc and amp turned on, there is considerable idle hiss present. Disconnecting the low level cables from the LCQ-1 proved this, as the hiss totally disappeared. I'll work on this issue to see if I can eliminate it.
Pros:
the equalizer and bass threshold control
Cons:
auto signal sensing turn-on ability does not work the cover plate is very difficult to reinstall if you change any of the jumpers on the circuit board (poor design) most of the circuit board jumpers are not labeled according to the documentation's labels (they just have J16 or J10 instead of what they are for)
1 out of 4 people found this helpful
Was this review helpful?    Yes | No
 
3 out of 5

Not for 2012 Tacoma

Written By Todd, New York on Thursday, April 05, 2012
Crutchfield Customer Review (What's this?)
 
After purchase of my new 2012 Double Cab Tacoma, I wanted better sound quality. The factory head unit has all the features I want; Bluetooth phone and audio, Sat radio, USB and aux inputs all with steering wheel controls, but the factory speakers were lacking a LOT. This unit was necessary to keep the factory head unit and add a 4 ch. amp, all new speakers and a powered sub. Plus, I was excited to get teh EQ to fine tune the stereo with. Well, apparently this unit doesn't like the signal from the 2012 Toyota radio. I was on the phone with Crutchfield tech support three times on a Sunday afternoon. (Amazing that a company even HAS tech support on a Sunday!) We tested my speaker wires, my power and ground connections and all my RCA outs. Everything into the unit was fine and everything out of the unit was fine. Tech support determines that this unit must be defective, so they immediately ship me a new one. Second unit, same as the first. Frustrated, I call Audio Controls directly. We recheck everything and they even had their engineers try to figure it out. No one can figure out why this doesn't work. So, I get back with Crutchfield and they are very apologetic and we agree to try the JL Cleensweep unit. This is on it's way to me now (fingers crossed that the Toyota head works with it) and I am even getting a discount. Crutchfield is amazing to deal with.
Cons:
Doesn't seem to work with the Toyota Tacoma 2012 factory radio.
4 out of 8 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Just what I needed!

Written By Fanch, TX on Wednesday, March 14, 2012
 
I installed this in my 2011 F-150 with the stock factory radio (non-Sony, non-Nav) along with speaker upgrades, amps and subs. I wanted to keep the factory look but fix the horrible factory sound. I was skeptical at first, but now I can honestly say the LCQ-1 is amazing! It works as advertised. The equalizer allowed me to fill the frequency gaps in the factory radio an correct for the bass roll-off at higher volumes. The features if this unit really let you customize the sound the way you want it. It took some trial and error to dial in the EQ but now it sounds perfect. If great sound quality is your goal, you need this unit just as much as the amps and speakers.
5 out of 5 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

AudioControl LCQ-1

Written By BobK, Kentucky on Wednesday, February 08, 2012
Crutchfield Customer Review (What's this?)
 
I purchased this to integrate with the factory system in my Lexus because the factory sound system was severely lacking. It is a great one piece integration device with several features that are necessary to achieve the quality that an aftermarket system can deliver. My factory system has the HVAC controls, navigation, radio and Bluetooth all built into the one unit so replacing it with an aftermarket head unit is out of the question. I took the factory signal after the amp in the trunk into the LCQ-1 for the front left and right speakers and sub and ran RCA's to my aftermarket amplifiers. I left the factory amplifier hooked up to the center channel and rear speakers because amplifying those was not necessary to achieve a realistic soundstage in my car.

The LCQ-1 is 100% noise free and delivers a strong and clean signal to my aftermarket amplifiers. The sound quality is excellent and It is as nice as a top notch aftermarket head unit. The equalizer has enough bands and they are at the right frequencies to address problem areas found in most cars. The EQ is what makes a good system sound great. During this process I also upgraded the factory front speakers to Focal 165 V30 and put some decent power to the factory 10" sub. I plan on installing an aftermarket sub in the near future as well. I used an RTA and my ears to dial things in and achieved a very wide and dynamic sound with properly placed instruments and vocals. It even has an optional sub level control.
Pros:
High quality processor with typical solid AudioControl electronics and build quality. Compact, easy to use and is a great one piece solution for OEM integration with just enough bells and whistles to satisfy an audiophile.
5 out of 5 people found this helpful
Was this review helpful?    Yes | No
 

2 questions already asked

Concerns about integration in 2010 Ford Expedition without NAV or RSE but does have in-dash 6 Disc player. Also of concern is rear backing assist tones from a rear speaker. When radio/LCQ/system is off, will I still hear these tones? Will the LCQ detect these tones and turn on and pass these tones? [ Kevin T.  Jan 18, 2014 ]
1 answer
  • You will want to contact an Advisor by phone (1-800-324-9695) or online chat to discuss compatibility with your factory system. They will be able to pull up your vehicle and see if this will integrate. If it does not, then they will also be able to discuss other options with you. [ Jeff Staff  Jan 19, 2014 ]
which sound processor should I get? [ simon  Dec 26, 2013 ]
3 answers
  • Thanks [ Chet   Jan 14, 2014 ]
  • What do I need to connect a Sony CDX-M60ui receiver to a MB Quartz NA540.6 Amp? Thank you, [ Chet   Jan 14, 2014 ]
  • Thanks for your question. For information on comparing two or more models I would recommend reaching out to an Advisor by phone or online chat. They will be able to help determine the differences and help you make the best choice for your system and your budget. [ Jeff Staff  Dec 27, 2013 ]

Add accessories for the AudioControl LCQ-1

Run premium audio cables from your new equalizer to your amps for premium sound. See all categories & accessories

T-Spec 2-Channel RCA Patch Cables Available in 7 different lengths (20-foot)
20 people say
Your Price: $20.99
Add to Cart
7 people say
Your Price: $29.99
Add to Cart
50 people say
Your Price: $9.99
Add to Cart
T-Spec 16-gauge Speaker Wire Black/white jacket — priced per foot
11 people say
Your Price: $0.69
Add to Cart
T-Spec 12-gauge Speaker Wire Black/white jacket — priced per foot
24 people say
Your Price: $1.99
Add to Cart
Stinger PRO Series 16-gauge Speaker Wire Black jacket — priced per foot
44 people say
Your Price: $0.39
Add to Cart
Pro.Fit Hook Tool Set Installation tools — pair
8 people say
Your Price: $6.49
Add to Cart
Pro.Fit Trim Panel Tool Remove your vehicle's trim panels without damage
77 people say
Your Price: $5.99
Add to Cart
Pro.Fit Wire Worm Installation tool helps route wiring through tight spaces
27 people say
Your Price: $12.99
Add to Cart
Bojo Trim Panel Tools Set of 6 pry tools — helps remove interior and exterior trim and door panels
48 people say
Your Price: $24.99
Add to Cart
S&G Wire Cutter/Stripper Tool Cuts and strips 12- to 22-gauge wire
13 people say
Your Price: $19.99
Add to Cart
Bojo Trim Panel Tools Set of 6 pry tools — helps remove interior and exterior trim and door panels
2 people say
Your Price: $29.99
Add to Cart
Posi-Products™ Wire Connectors 6 tap connectors for 10- to 22-gauge wires — tap into wires without cutting or stripping
21 people say
Your Price: $8.99
Add to Cart

Why choose SquareTrade?

The #1-Rated Protection Plan

Thousands of people have reviewed SquareTrade Protection Plans — and made us #1.

5-Day Service Guarantee & Free Shipping

We'll repair or replace your item in five business days or less after we've received it, or your plan is free. And, as always, we pay for all shipping.

Protection from Normal, Everyday Use

Repairing your average mechanical or electrical failure can cost as much as buying a new device. With SquareTrade, you're covered — including parts and labor.

For a more in-depth review and enhanced detailed information on the AudioControl LCQ-1, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_161LCQ1G/AudioControl-LCQ-1-Gray.html ).