About the Niles AVDA3
With the Niles AVDA3, a single video component can feed TVs or A/V receivers in three different rooms. A "cascade" output lets you connect another AVDA3, to feed another three locations.
Product highlights:
- 1 audio/video input (analog stereo audio and composite video)
- 3 audio/video outputs
- audio/video cascade output to daisy-chain another AVDA3
- gold-plated RCA connectors
- AC adapter included
- 8"W x 3-15/16"H x 1-3/8"D
- warranty: 2 years
- MFR # FG00814
What's in the box:
- AVDA-3 audio/video distribution amplifier
- AC adapter (SB41-249A) with an attached 78" AC input cable and a 74" AC output cable (AC output: 15 Volts 500mA)
- 4 Self-adhesive rubber feet
- Installation and Operation Guide
- Warranty and Registration card
Customer reviews for Niles AVDA3
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Niles AVDA3
Product Research
Product Overview: The Niles Audio AVDA-3 is a source-level audio and base-band video distribution amplifier. It incorporates a stereo audio input and a video input, which are actively distributed to three audio/video outputs.
Connections: The AVDA-3 is equipped with gold-plated RCA connectors for optimum signal transfer. Wire runs of less than 50 feet are recommended. The unit's connections are as follows:
- Input: one pair of stereo audio RCA jacks and a composite video jack
- Cascade Output: one pair of stereo audio RCA jacks and a composite video jack
- Outputs: three pairs of stereo RCA jacks and three composite video jacks
Note: If your system only requires either audio only or video only distribution, the AVDA-3 can safely operate with either its audio or video sections unused. Termination is not required.
Cascade Outputs: The Niles AVDA-3 features a set of audio/video cascade outputs with automatic video impedance matching. This allows the use of multiple AVDA-3 units for simple system expansion with optimal picture quality. You can daisy-chain up to four AVSA-3s for system expansion.
Installation: You can install the AVDA-3 on a tabletop or shelf using the self-adhesive rubber feet or mount on a wall using the integrated mounting flanges.
Audio:
- Input Impedance: 100K
- Output Impedance: 100 ohms
- Frequency Response: flat from DC to >20KHz
- Signal-To-Noise Ratio: >80 dB reference at 1 volt
- Crosstalk: .070 dB at 1kHz
- Total Harmonic Distortion (THD): 0.003% (20 Hz to 20 KHz)
- Maximum Input Signal: 6 volts RMS
Video:
- Video Bandwidth: DC to 7 MHz
- Maximum Input Signal: 2 volts peak to peak
- Input Impedance: 75 ohms
- Output Impedance: 75 ohms
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Installed a video system with lines to all my tv's, great picture quality after running through the amp.
Mike S. from Columbia Station, OH