Product Overview: The
Niles Audio AVDA-3 is a source-level audio and base-band video distribution amplifier. It
incorporates a stereo audio input and a video input, which are actively
distributed to three audio/video outputs.
Connections: The AVDA-3 is
equipped with gold-plated RCA connectors for optimum signal transfer. Wire runs
of less than 50 feet are recommended. The unit's connections are as follows:
one pair of stereo audio RCA jacks and a composite video jack
- Cascade Output:
one pair of stereo audio RCA jacks
and a composite video jack
- Outputs: three pairs of
stereo RCA jacks and three composite video jacks
Note: If your system
only requires either audio only or video only distribution, the AVDA-3
can safely operate with either its audio or video sections unused.
Termination is not required.
Cascade Outputs: The Niles
AVDA-3 features a set of audio/video cascade outputs with automatic video
impedance matching. This allows the use of multiple AVDA-3 units for simple
system expansion with optimal picture quality. You can daisy-chain up to four
AVSA-3s for system expansion.
Installation: You can install
the AVDA-3 on a tabletop or shelf using the self-adhesive rubber feet or mount
on a wall using the integrated mounting flanges.
- Input Impedance: 100K
- Output Impedance: 100 ohms
- Frequency Response: flat from DC
- Signal-To-Noise Ratio: >80 dB
at 1 volt
- Crosstalk: .070 dB at 1kHz
- Total Harmonic Distortion (THD):
0.003% (20 Hz to 20 KHz)
- Maximum Input Signal: 6 volts RMS
- Video Bandwidth: DC to 7 MHz
- Maximum Input Signal: 2
volts peak to peak
- Input Impedance: 75 ohms
- Output Impedance: 75 ohms
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.