IR System Overview:
An infrared (IR) extender system enables you to control
your IR remote controlled A/V equipment from a
remote location. This enables you to place your A/V
components out of sight (behind cabinet doors, in
the rear of a room, or in a different room) and still conveniently
control your equipment.
IR System Components:
The MSU480 IR Main System Unit is one of three elements
that make up an infrared extender system:
IR Main System Unit: This Main System Unit provides a connection hub for
four IR sensors and/or keypads and up to eight
IR flashers and is generally located near the A/V components.
The Main System Unit, which is the "heart" of an IR
extender system, has LED indicators to monitor
the IR extender system.
Sensors/Keypad (sold separately):
Sensors: IR Sensors are the "eyes" of the system, receiving IR
commands from hand-held remote controls and
relaying the commands to the Main System Unit via a 2-conductor
shielded cable. Generally, sensors are placed so
that you can easily and naturally point your remote control directly at
them. Sensors are available in wall-mount, ceiling-mount, surface-mount
and table-top models.
- Keypad: The IntelliPad
is a wall-mounted, programmable IR keypad system that provides a unique
LED power status display and the convenience of true one-button remote
control of complex audio/video systems.
- IR Flashers
IR Flashers re-transmit the infrared signals from the IR Main
System Unit to your A/V components. Flashers are the
"voice" of an IR extender system that "speaks" to your components.
Universal Compatibility: With
the necessary accessories, an IR remote control extender system using the MSU480
is compatible with virtually all brands of A/V equipment and remote controls
(using carrier frequencies between 26 and 105 kHz).
Flasher Hi/Lo Switch: Two of
the eight IR flasher outputs have switchable high/low output. When switched to
High, you can connect a high-output flooding flasher, such as an IRB1 (item
190IRB1). When in the Low position, you can connect low-output micro-flashers,
such as MF1, MF1VF, MF2 or MF2VF.
LED Indicators: The MSU480
provides a visible indication of system status via a green LED and confirms
reception of IR data via a blinking blue LED.
Wiring: From every IR sensor,
you must "home-run" a Category 5 ("Cat 5") cable back to the MSU480, connecting
each sensor to the hub with an individual cable. The Cat 5 cable should be
terminated with the supplied quick connect sensor plugs. The IR flashers connect
to the hub via 3.5mm (1/8") mini-plugs.
12 Volt Trigger: The MSU480
features a 3-30-volt AC/DC status jack that provides system status to sensors
and keypads via a 12-volt power supply attached to a switched outlet (found on
many audio receivers) or an optional 12-Volt trigger output. When 12 volts is
detected at the status jack, the 12-volt output jack will output 12 Volts/200mA
DC. This is useful for triggering external devices and system automation.
Expandability: The IR System
can be easily expanded through the use of an IRH610 IR Sensor Expansion Hub
(available from the manufacturer). The expansion hub allows you to add up to 6
Contact Closure Plug: The
MSU480 has a three position quick connect plug for connecting either a NO
(normally open) or NC (normally closed) contact closure device. There is a two
position switch that determines if the contact closure is activated by either
the presence of status or discrete IR commands.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.