Chat
Contact us
Close contact box
Connect ID #
782 355 797 4
Connect ID #
782 355 797 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Niles RCA-SM2 Infrared repeater system

Item # 190RCASM2

The RCA-SM2 kit from Niles gives you easy control over your audio/video system, even if your gear is placed out of...

The RCA-SM2 kit from Niles gives you easy control over your audio/video system, even if your gear is placed out of...

4 questions - 16 answers

Item # 190RCASM2

About the Niles RCA-SM2

Amanda P.
The RCA-SM2 kit from Niles gives you easy control over your audio/video system, even if your gear is placed out of sight in a cabinet or closet. It includes everything you need to set up a complete IR (infrared) repeater system and control up to three A/V components:

The RCA-SM2 kit from Niles gives you easy control over your audio/video system, even if your gear is placed out of sight in a cabinet or closet. It includes everything you need to set up a complete IR (infrared) repeater system and control up to three A/V components:

  • MS220 IR sensor — Mount this small sensor in a convenient spot, like next to your TV. It sends the IR commands from your remote control to the IR hub.
  • MSU140 IR hub — Accepts incoming IR signals and passes them on to your A/V components.
  • three MF1 flashers — Infrared light-emitting devices that carry IR commands from the MSU140 to your A/V gear.
  • 50 feet of CAT-5 cable to connect the IR sensor to the IR hub.

READ LESS

Product highlights:

  • complete IR repeater system
  • controls up to 3 A/V components with included IR flashers
  • MSU140 hub can accommodate an additional IR flasher or dual flashers for controlling as many as 8 components
  • LCD- and plasma-proof wall-mountable sensor design — works near flat-panel TVs
  • UL-listed, regulated in-line power supply with universal voltage capability
  • warranty: 2 years
  • MFR # FG01585

What's in the box:

  • MSU140 IR Main System Unit
  • 4-Pin "screwless" sensor connector for category 5 cable
  • Black MS220 with attached 10' IR cable
  • AC power adapter with attached 74" DC output cord (DC output: 12V/250mA)
  • US 2-pronged AC plug insert (for AC power adapter)
  • 3 MF1 Microflashers with attached 10' cable (3.5mm miniplug terminal)
  • 3 Self-adhesive IR blocking covers
  • 6 Self-adhesive Microflasher pads
  • 50' CAT-5 cable
  • 4 Self-adhesive rubber feet
  • Installation Guide

Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.

See the difference between "Open Box" and "Scratch & Dent" Outlet items

Customer reviews for Niles RCA-SM2

Loading reviews...

Average review:

4.5 out of 5 stars
15 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Niles RCA-SM2

Stacey B.

Product Research

Overview
MSU140 Main System Unit Features
MS220 IR Sensor Features
MF1 MicroFlasher Features
Dimensions

Overview

IR System Overview: An infrared (IR) extender system enables you to control your IR remote controlled A/V equipment from a remote location. This enables you to place your A/V components out of sight (behind cabinet doors, in the rear of a room, or in a different room) and still conveniently control your equipment.

IR System Components: This infrared extender system includes the following items:

  • IR Main System Unit: The MSU140 IR Main System Unit provides a connection hub for the IR sensor or keypads and up to four IR flashers, and it is generally located near the A/V components. The Main System Unit is the heart of an IR extender system.
  • IR Sensors: IR Sensors, like the included MS220 surface mount model, are the eyes of the system, receiving IR commands from hand-held remote controls and relaying the commands to the Main System Unit via a CAT-5 or a 4-conductor shielded cable. Generally, sensors are placed so that you can easily and naturally point your remote control directly at them. Sensors are also available in wall-mount, ceiling-mount and tabletop models.
  • IR Flashers: These IR MicroFlashers re-transmit the infrared signals from the IR Main System Unit to your A/V components. Flashers are the voice of an IR extender system that speaks to your components.
MSU140 Main System Unit Features

Universal Compatibility: With the necessary accessories, an IR remote control extender system using the MSU140 is compatible with virtually all brands of A/V equipment and remote controls using carrier frequencies between 26 kHz and 105 kHz.

Wiring: If the distance from the IR sensor to the MSU140 is longer than the attached 10' cable, it can be extended with the included 50' Category 5 (Cat 5) cable. The Cat 5 cable should be terminated with the supplied quick connect sensor plugs. The IR flashers connect to the hub via 3.5mm (1/8") mini-plugs.

Status Input: The MSU140 features a 3-30-volt AC/DC status input jack which provides system status to sensors and keypads when connected to a switched AC or DC output on an audio receiver or preamp. An optional 12-Volt adapter may be necessary.

MS220 IR Sensor Features

Universal Compatibility: When used in a complete system, this IR sensor is compatible with virtually all brands of A/V equipment and remote controls using carrier frequencies of between 25kHz and 90kHz. The MS220 is also compatible with the recently introduced Philips RCMM codes.

Universal Noise Suppression: The sensor has a patent-pending Universal Noise Suppression design that effectively eliminates IR interference from plasma and LCD TVs, CFL (fluorescent) lighting, and direct sunlight. This two-stage technology combines an optical noise filter with a smart electronic circuit to provide consistent, reliable control.

IR Receiving Range: You get 20' to 35' of remote control range, depending upon the strength of your handheld remote. The IR pickup angle is 30° off-axis (horizontal and vertical) at 25'.

Bi-colored LED: The LED glows green when the system is on and flashes blue to confirm reception of IR commands.

Mounting: The MS220 is designed to surface-mount almost anywhere using its adhesive back. Convenient mounting locations for the MS220 include: on the front panel of a television set, on the front surface of a wall, a cabinet, an appliance, or a speaker grille.

MF1 MicroFlasher Features

Universal Compatibility: When used in a complete system, this IR MicroFlasher is compatible with virtually all brands of A/V equipment and remote controls using carrier frequencies between 20kHz and 455 kHz.

Mounting: The MF1 is designed for pin-point relaying of IR commands, so it is typically mounted to the infrared remote sensor window of an audio/video component using the self-adhesive backing. The flasher hoods can be used to block any ambient light or other remote signals. The MF1 has a transmitting range of up to approximately 4'.

Dimensions
  Width Height Depth
MSU140 Main System Unit 4.75" 2" 0.813"
MS220 IR Sensor 2.047" 0.685" 0.466"
MF1 MicroFlashers 0.330" 0.559" 0.235"

Loading accessories...

Customer Q&A

4 questions already asked

Q
What remote control would I use? Is there a particular one or something like a Logitech?
mickey  Sep 20, 2019
2 answers
A
I no longer use product cable is now wifi
douglas  Sep 20, 2019
A
I purchased the Niles RCA-SM2 2 years ago and am very satisfied with the performance. Easy to install and performs great. I paired it with a Logitech Harmony 650 remote. The remote is very intuitive and easy to use. Overall very pleased I purchased both units and look forward to many years of use!
daniel m.  Sep 20, 2019
Q
How do you extend the range of this item with the supplied cat5 wire?
jhart  Oct 21, 2015
4 answers
A
I used this in my office waiting room. I did not want the Cable Box to be hung from the wall or sitting on top of furniture. I was fortunate to run the cat5 wire from the cable box which sits at the front desk, above the drop ceiling to the waiting room, then dropped it down from the drop ceiling. It was fairly easy.
david j  Oct 22, 2015
A
I couldn't figure it out either and wound up soldering the two wires together. Worked well for me.
travis  Oct 22, 2015
A
We ended up not needing this product for our set up, so I'm sorry I can't help.
marcea  Oct 21, 2015
A
Can't help you because I set up the remote receiver very close to the devices I was operating
scott  Oct 21, 2015
Q
Will it control an AT&T U-Verse box?
matthew  Aug 04, 2014
5 answers
A
Does the AT&T U-Verse box have an infra-red remote and can you find the "IR eye" on the box? If so, then this unit will work.
carolyn  Aug 05, 2014
A
No! I spoke to Niles' customer support and they referred me to another of their brands, Xantech, whose model DL85K Plasma/LCD/LED/CFL Proof Designer Dinky Link IR Receiver Kit, works perfectly for me.
anne  Aug 04, 2014
A
I'm sorry. I have no idea
peter  Aug 04, 2014
A
Not sure about AT&T but works great with comcast x-1 platform also use it to control a sony bluray and sony home theater reciver
robert  Aug 04, 2014
A
Hi Matthew. I hooked it up on a Verizon control box without any problems. As long it can communicate with the device there shouldn't be any issues.
eyes  Aug 04, 2014
Q
Does this system work with Verizon FIOS?
kathryn  May 26, 2014
5 answers
A
Yes it does
paul  May 27, 2014
A
Dear Kathy R, Since I don't have Verizon fios, I can't answer the question, but I don't see any reason that it wouldn't work. All I can say is that I use it for my receiver and CD, and it works beautifully. Good luck, Peter
peter  May 27, 2014
A
Kathy, I do not have Verizon FIOS, so I don't know the answer to your question. It works well with my TimesWarner Cable remote and Yamaha Reciever
timothy  May 27, 2014
A
Yes it does, and works very well.
drew  May 27, 2014
A
Yes it works with verizon fios
jeff  May 26, 2014

Loading articles...

Compare the sound