Overview: The SVC100K (FG01653) is a
high-power sliding stereo speaker volume control that connects between the speaker-level output of
an amplifier, speaker selector, or a Niles distribution hub and a pair
of speakers. It lets you adjust the volume of a pair of loudspeakers, just as a
light dimmer enables you to control the light. Premium-quality parts and construction ensure high-fidelity sound
with flat frequency response and 100 watts continuous power
handling. It is designed for indoor use only.
Four Colors: The SVC100K installs in-wall in a standard
single-gang junction box (J-box). The package includes a Decora faceplate and
slider insert in each of four colors: white, light almond, bone, and black.
Selectable Impedance Magnifying Circuit: A
universal impedance magnifying circuit enables the SVC100K to act as both a
stereo and an impedance magnifying volume control. You can magnify the speakers'
impedance by a factor of two, four, or eight, allowing you to connect up to
eight pairs of speakers to a single amplifier or receiver. A sliding switch on
the circuit board lets you set the impedance factor to 1x, 2x, 4x, or 8x.
12-Step Control: The slide switch gives you 12-step control,
and a total of 54dB maximum attenuation. The high-quality construction assures
you get pop-free switching between all steps.
The 2-piece screwless speaker connectors make installation quick and secure. Each
connector can accept up to 16-gauge wire.
The SVC100K is listed to comply with local building codes. You should check with
your local building official to ensure code compliance for your jurisdiction.
Mounting: The SVC100K has a mounting depth of 2-9/16". When
installed, the unit extends 2-1/16" behind the sheetrock (assuming 1/2"-thick
sheetrock). A standard 18 cubic-inch or larger J-box is required.
Speaker Wire: The SVC100K will accept
stranded copper wire up to 16-gauge. Larger (lower gauge) wire is not
recommended, as it will not fit into the connectors. Solid-core, aluminum, or
"Romex" wire is not recommended. Most states require in-wall speaker
wire to have a specific "CL" fire rating.
Required Tools: To install the SVC100K,
you will need a Phillips screwdriver and wire stripper.
- Audio Power Handling: 100 watts/channel
RMS; 200 watts/channel peak music power
- Impedance: compatible with 4-, 6-, and
8-ohm speaker systems
- Volume Control: W=1.529",
- Wall Plate: W=2.945", H=4.688", D=0.237"
(Cutout: 1.31" x 2.628")
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.