Overview: The WVC100K is a
waterproof stereo speaker volume control that connects between the speaker-level output of
an amplifier, speaker selector, or a Niles distribution hub and a pair
of speakers. Premium-quality parts and construction ensure high-fidelity sound
with flat frequency response and 100 watts continuous power
Four Colors: The WVC100K installs in-wall in an outside
location in a standard single-gang junction box (J-box). The package includes a
Decora faceplate, insert, and knob in each of four colors: white, light almond,
bone, and black.
Selectable Impedance Magnifying Circuit: A
universal impedance magnifying circuit enables the WVC100K to act as both stereo
and an impedance magnifying volume control. You can magnify the speakers'
impedance by a factor of two, four, or eight, allowing you to connect up to
eight pair of speakers to a single amplifier or receiver. A sliding switch on
the front on the volume control lets you set the impedance factor to 1x, 2x, 4x,
12-Step Control: The rotary design gives 12-step control,
and a total of more than 48dB maximum attenuation. The high-quality construction
assures you get pop-free switching between all steps.
Precision autoformers provide superior sonic performance, exceeding the audio
quality of non-impedance magnifying volume controls.
Removable Screwless Speaker Connectors:
Two piece, screwless speaker connectors make installation quick and secure. Each
connector can accept up to 16-gauge wire.
Isolated Grounds: Isolated left and
right-channel grounds ensure safety with any amplifier.
Impedance Compatibility: The WVC100K
be used with 4-, 6-, or 8-ohm speaker systems.
Outdoor Wall Mount Application: The WVC100K volume control
is designed for environmental wall-mount installation. It comes with a
waterproof rubber gasket to protect the volume control's internal circuits from
Speaker Wire: The WVC100K will accept
stranded copper wire up to 16-gauge. Larger (lower gauge) wire is not
recommended, as it will not fit into the connectors. Solid-core, aluminum, or
"Romex" wire is not recommended. Most states require in-wall speaker
wire to have a specific "CL" fire rating.
Required Tools: To install the WVC100K,
you will need a Phillips screwdriver and wire stripper.
- Audio Power Handling: 100 watts/channel
RMS; 200 watts/channel peak music power
- Frequency Response: 20 to 20,000 Hz
- Impedance: compatible with 4-, 6-, and
8-ohm speaker systems
- Volume Control: W=1.541",
- Wall Plate: W=2.99", H=4.765", D=0.311" (Cutout Diameter:
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.