Chat
Contact us
Close contact box
Connect ID #
896 774 387 4
Connect ID #
896 774 387 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Bazooka BTA10100 BT Series powered Bass Tube® enclosure with 10" sub and 100-watt amp

Item # 204BTA1010

The affordable BTA10100 10" amplified Bazooka Bass Tube lets you add ride-filling bass to your system with a...

Find what Fits your vehicle

Remove

Checking fit...

The affordable BTA10100 10" amplified Bazooka Bass Tube lets you add ride-filling bass to your system with a...

10 questions - 15 answers

Item # 204BTA1010

In stock
$299.99

About the Bazooka BTA10100

Steven Johnson

A bass cannon

The affordable BTA10100 10" amplified Bazooka Bass Tube lets you add ride-filling bass to your system with a minimum of hassle. It's an ideal solution if you drive a leased vehicle, and want the thrill of powerful bass but don't want to make any modifications. The BTA10100 Bass Tubes enclosure comes with a 10" woofer, a built-in amp (100 watts max power), and installation parts including a power/signal harness (15" power and ground wires, 10" turn on and speaker input leads, RCA inputs, and auto turn-on jumper), 7.5-amp fuse with holder, power rings, and mounting hardware.

A bass cannon

Bass makes up about 30% of your music, and it gives music its power and impact. A good subwoofer can make an average car audio system sound good, and a good car audio system sound great. Good bass is all about moving air, and a cylindrical tube translates the motion of its woofer into maximum air pressure so you hear and feel more bass. Bazooka designed the Bass Tube to act like a bass cannon, firing low frequencies throughout your vehicle.

Bass Tube efficiency

BTA10100 10" amplified Bass Tubes enclosure

The affordable BTA10100 10" amplified Bazooka Bass Tube lets you add ride-filling bass to your system with a minimum of hassle. It's an ideal solution if you drive a leased vehicle, and want the thrill of powerful bass but don't want to make any modifications. The BTA10100 Bass Tubes enclosure comes with a 10" woofer, a built-in amp (100 watts max power), and installation parts including a power/signal harness (15" power and ground wires, 10" turn on and speaker input leads, RCA inputs, and auto turn-on jumper), 7.5-amp fuse with holder, power rings, and mounting hardware.

Big bass without losing space

Bass Tubes fit just about anywhere

A compact Bass Tube will fit in almost any vehicle, and you can disconnect it in a snap if you need more cargo space. Since the tube's speaker and port are right next to each other, you can get amazing results by "corner loading" your tube — placing it in a corner of your trunk or cargo area so your vehicle's boundaries act as a natural amplifier, boosting bass production.

Bass control from the driver's seat

An optional wired Remote Bass Control Module gives you independent in-dash volume control of your bottom end.

Important Note: You'll need to purchase an amp wiring kit to install this powered Bass Tubes enclosure — the included wiring harness is less than two feet long.

READ LESS

Product highlights:

  • 10" woofer with treated foam surround
  • power output 100 watts max
  • 10-gauge amp wiring kit required (sold separately)
  • 85 Hz low-pass filter (18 dB/octave)
  • line- and speaker-level inputs
  • frequency response 39-85 Hz
  • subsonic filter (12 dB/octave at 35 Hz) for improved amp efficiency
  • sensitivity 107 dB
  • 20-7/8"L x 10-3/8"W x 12-1/4"H
  • 2-ohm impedance
  • warranty: 1 year
  • MFR # BTA10100

What's in the box:

  • One 10" amplified tube-style subwoofer with attached grille
  • 10" Wiring harness
  • 1 In-line fuse holder with a 7.5A fuse (has 6" leads on both sides)
  • 3 Blue butt connectors
  • 1 Crimp-on ring
  • 1 Self-tapping screw
  • Two 40-1/2" mounting straps (each strap has an attached plastic mounting base)
  • 4 Self-tapping screws
  • Installation Manual

Customer reviews for Bazooka BTA10100

Loading reviews...

Average review:

4.5 out of 5 stars
38 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Bazooka BTA10100

Pat M.

Features & specs

General
Enclosure Type Ported
Finish Material Poly
Grille Plastic
Connector Type Molex plug
Quick-disconnect Plug Yes
Bi-amp Inputs No
Woofer Size (inches) 10
Woofer Material Poly
Passive Radiator None
Width 10-3/8"
Height 12-1/4"
Depth 20-7/8"
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Frequency Response 39-85 Hz
Amplifier Power (RMS) 100 watts
Maximum Wattage N/A
Sensitivity 107 dB
Impedance 2 ohms
Second Voice Coil Impedance N/A
Crossover Point 85
The Bazooka BTA10100 replaces these items:

Product Research

Features
Controls
Connections
Installation

Features

Overview: The BTA10100 features a water-resistant poly enclosure that houses an 10" poly woofer with a foam surround. The woofer is powered by a built-in 100-watt maximum amplifier. The patented Bass Tube enclosure design eliminates bass standing waves for high accuracy, and superior efficiency.

Low-pass Filter: The BTA10100 has a fixed low-pass filter at 85 Hz with a slope of 18 dB/octave.

Subsonic Filter: The subsonic filter, set at 35Hz, prevents really low frequencies from being amplified. This allows the amplifier to run more efficiently with increased power output.

Remote Level Control: Using an optional remote level control, you can control the bass output level of the subwoofer from a remote location.

Auto Turn-On: The subwoofer will turn on automatically when it senses music in the high-level or low-level inputs.

Balanced Input Circuitry: Balanced low-level and balanced high-level input circuitry is used for improved noise reduction.

Controls

Back Panel:

  • Level Control: rotary control that allows you to adjust the level of the subwoofer
  • Input Phase Switch: allows you to adjust the phase of the subwoofer
  • Power LED: if power, ground and remote are connected properly, the LED will illuminate in green
Connections

Back Panel:

  • Remote Level Control: minijack for use with optional remote level control
  • Harness: 14-pin Molex plug for use with supplied harness
Installation

Installation: Each mounting strap has an attached mounting base that can be secured to your vehicle using the supplied self-tapping screws. Once the mounting bases are installed, the tube is held in place by the mounting straps. For best results, the tube should be mounted facing into a corner, and there should be 2" to 4" between the woofer and the corner into which the woofer is pointing.

Required Accessories:

  • Power Wire: the 16-gauge power lead is only 10" long, so additional wire is required to extend it to the battery. Additional power wire must be crimped or soldered to the Bazooka's power lead.
  • Ground Wire: the 16-gauge ground lead is also only 10" long, and may need to be extended. Additional ground wire must be crimped or soldered to the Bazooka's ground lead.
  • Speaker Wire: required only when using the high-level inputs
  • RCA Patch Cord: required only when using the low-level inputs
  • Remote Turn-on Wire: required only if you do not use the auto turn-on feature

Loading accessories...

Customer Q&A

10 questions already asked

Q
i already have a 10 inch bazooka but im moving the sub into my 2014 tacoma. what wires will i need to install it?
jonah  Feb 28, 2023
1 answer
A
That Bazooka tube is sure to sound great in your Taco, Jonah! IF your Bazooka has the 100-watt amp built in like this unit you will want to snag the Crutchfield CK12 12-gauge wiring kit in the first link below. Grab some extra 16-gauge Crutchfield speaker wire in the second link below for your signal input and you are all set! https://www.crutchfield.com/p_007CK12/Crutchfield-CK12.html https://www.crutchfield.com/p_007CSW16/Crutchfield-Speaker-Wire-16-gauge.html
bo  Mar 01, 2023 (Staff)
Q
How do you install 2 Bazooka BTA10100? These are powered subs, but don't know how to install 2 to work together. Thanks.
jose sergio  Aug 10, 2022
1 answer
A
Installing two is possible, but doing so will depend on a few different factors. Please give our advisors a call at 1-800-324-9695. We'll be happy to discuss the details of your audio system.
zachary  Aug 10, 2022 (Staff)
Q
Will this work with a boss acp radio ?
walter  Mar 18, 2022
1 answer
A
Sorry I'm not sure but I would think it would work with any car stereo, factory or aftermarket. Since it's powered and they wire it to the Battery and one rear speaker. Call Bazooka customer service to be sure though. I've owned this same subwoofer for the last 20 years. The last one I moved from car to car for a decade and a half! I finally kept it in the last car I sold then regretted it so I bought a new one for my current vehicle. It sounds superb and still a great value. And you can control the bass as desired. Recommend 110%! Good luck.
greg  Mar 21, 2022
Q
Will this work with a 2003 mustang gt with stock Mach 460 stereo?
dewfod  Dec 14, 2018
1 answer
A
Absolutely. The Bazooka features "high level" signal inputs for use with a factory stereo and the RCA inputs for use with an aftermarket one. So, if you will be connecting to the stock system, you can tap the factory speaker wires to provide the audio signal to the bass tube's high level inputs. The rest of the install is pretty standard; power from the battery and ground to the chassis. www.crutchfield.com/p_007CK10/item.html For additional assistance and personalized recommendations, feel free to contact us directly by phone or through our online chat service: https://www.crutchfield.com/support/ContactUs.aspx
ryan  Dec 21, 2018 (Staff)
Q
Will the bazooka tube 8 inch speaker fit in the back of my seat in2014 toyota tundra crewcab?
rujjy  May 20, 2016
1 answer
A
In the back seat? Probably but you won't have much room left for passengers with a sub on the seat. If you meant under the seat, no, it's not likely to fit there. While we do not have the available space dimensions in that location, we do have the dimensions on this Bazooka: ?20-7/8"L x 10-3/8"W x 12-1/4"H So, you'd need a little more than a foot of clearance to accommodate the tube. You may want to consider a compact powered model like the Rockford Fosgate PS-8 instead: http://www.crutchfield.com/p_575PS8/item.html I hope that helps! My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=5
ryan  May 23, 2016 (Staff)
Q
Can I add this sub to a 2003 Dodge Ram truck with a stock stereo?
jeffrey  Dec 01, 2015
1 answer
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
kristina  Dec 02, 2015 (Staff)
Q
Can i hook an extra amp up to my bass tube i feel like i need more watts on it maybe something small like a 250 watt amp?
cutty  May 11, 2015
5 answers
A
I do not know if this is possible. My gut says yes being that I've always been told that more power is better than less power.
tamill  May 23, 2015
A
I wish I had an absolute answer here. From my experience, the Bazooka has a built-in amp. There are adjustments you can make to your car stereo bass and to the bazooka bass until you find a happy medium. My bass was a little low as well. Then I made a few simple adjustments with the knobs, and BOOM!! Good luck.
ryan  May 14, 2015
A
This bass tube is already wired with a 100 watt amp. If you put a amp to a amp you will burn out one if not both amps not a good idea to do this. My bass tube works great straight from the factory. There is a adjustment on the bass tube to increase the amount of bass if needed and mine I have set on the low side and it keeps me hapy. But no I would never put a amp to a amp. Let me know how you make out with this should you do it. Good luck cutie
darrell  May 11, 2015
A
You can not add an amp as the amp is inside of the tube so you'll need to open the tube disconnect the stock amp and add the one you want also the woofer is matched to the enclosure and amp. If you want more bass i think it is better just to buy something bigger and or more powerful
ernie joel  May 11, 2015
A
I would buy the un-powered model than. This has been engineered to run at the wattage of the integrated amp, if it would even work. Why spend the money for the integrated amp that you don't want to use? I am not an expert so I can't say 100% that running a powered amp into the RCA inputs would work and most likely it would blow something. Just get the model without the amp and spend the $$ you save on the tube on a better amp.
bernard  May 11, 2015
Q
Hi, My Car is a Civic Si 2014 Sedan and it comes with a 7 speakers system. The question is if I can just unplug the factory subwoofer wire and plug it to the "bazooka" or I need something else? Have a Nice Day . Att. Bryan
bryan  Nov 16, 2014
1 answer
A
You can try to plug into the factory plug , if it does not work then call Crutchfield and they should have a adapter plug that will go into the factory plug. They carry them when I do installs of the receiver and I get the plug that goes right into the existing factory plug so installation goes quick and easy without splicing wires so I would think that Crutchfield would also carry a plug for the Bazooka to go into your factory setup.
darrell  Nov 17, 2014
Q
Can I connect the power wire directly to a12v behind the the radio( unit)?
eric  May 09, 2014
2 answers
A
I ran a separate line to the battery for my sub this way I know it will get the correct voltage and amperage no need to overheat the amp.
darrell  Nov 17, 2014
A
I'm not sure I used the power from the factory amp ....
william  May 12, 2014
SHOW MORESHOW LESS

Loading articles...

Compare the sound