About the Bazooka BTA10250D
A bass cannon
A bass cannon
Bass makes up about 30% of your music, and it gives music its power and impact. A good subwoofer can make an average car audio system sound good, and a good car audio system sound great. Good bass is all about moving air, and a cylindrical tube translates the motion of its woofer into maximum air pressure so you hear and feel more bass. Bazooka designed the Bass Tubes enclosure to act like a bass cannon, firing low frequencies throughout your vehicle.
BTA10250D 10" amplified Bass Tubes enclosure
Bazooka's BTA10250D 10" amplified Bass Tubes enclosure lets you add ride-filling bass to your system, whether you drive your own vehicle or a leased car. Its 10" woofer combines with a built-in Class D 200-watt amp to delivers strong bass without taking up extra space. A variable low-pass filter allows you to tune the bass output to match up with your vehicle's sound system. You'll also get an installation kit that includes a power/signal harness, 20-amp fuse with holder, straps, and mounting hardware.
Bass Tubes fit just about anywhere
A compact Bass Tubes enclosure will fit in almost any vehicle, and you can disconnect it in a snap if you need more cargo space. Since the tube's speaker and port are right next to each other, you can get amazing results by "corner loading" your tube — placing it in a corner of your trunk or cargo area so your vehicle's boundaries act as a natural amplifier, boosting bass production.
Double your fun
Want to double your bass? With an optional speaker-level output adapter, you can connect a second passive Bazooka Bass Tube to the built-in amp for a serious boost in bass response. An optional wired Remote Bass Control Module gives you independent in-dash volume control of your bottom end.
Important Note: You'll need to purchase an amp wiring kit to install this powered tube.
Product highlights:
- 200-watt powered 10" Bass Tube
- 10" woofer with treated foam surround
- built-in Class D amplifier delivers 200 watts RMS at 4 ohms (250 watts max)
- mounting straps, wire harnesses and hardware included
- 10-gauge amp wiring kit required (sold separately)
- adjustable low-pass filter (60-250 Hz)
- preamp- and speaker-level inputs
- optional speaker-level outputs for connecting a 2nd Bass Tube
- fuse: 20A x 1
- frequency response: 30-250 Hz
- sensitivity: 100 dB
- dimensions: 10-13/16"W x 12-11/16"H x 22-3/8"D
- warranty: 1 year
- MFR # BTA10250D
What's in the box:
Bazooka BTA10250D owner's manual
- One 10" amplified tube-style subwoofer with attached grille
- 10" Signal wiring harness
- Power wiring harness (has an 11" power lead and 23" ground lead)
- 1 In-line fuse holder with a 20A fuse (has 4" leads on both sides)
- 2 Yellow butt connectors
- 1 Crimp-on ring
- One 1/2" self-tapping screw
- Two 3' mounting straps (each strap has an attached plastic mounting base)
- Four 1" self-tapping screws
- Installation Manual
Customer reviews for Bazooka BTA10250D
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Bazooka BTA10250D
Features & specs
General | ||
---|---|---|
Enclosure Type | Ported | |
Finish Material | Poly | |
Grille | Plastic | |
Connector Type | Molex plug | |
Quick-disconnect Plug | Yes | |
Bi-amp Inputs | No | |
Woofer Size (inches) | 10 | |
Woofer Material | Poly | |
Passive Radiator | None | |
Width | 10-13/16" | |
Height | 12-11/16" | |
Depth | 22-3/8" | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Frequency Response | 30-250Hz | |
Amplifier Power (RMS) | 200 watts | |
Maximum Wattage | 250 watts | |
Sensitivity | 100 dB | |
Impedance | 4 ohms | |
Second Voice Coil Impedance | N/A | |
Crossover Point | 60-250Hz |
Product Research
Features
Controls
Connections
Installation
Features
Overview: The BTA10250D features a water-resistant poly enclosure that houses a 10" poly woofer with a foam surround. The woofer is powered by a built-in 200-watt digital amplifier. The patented Bass Tube enclosure design eliminates bass standing waves for high accuracy, and superior efficiency.
Low-pass Filter: The BTA10250D has a low-pass filter that can be adjusted from 60 to 250 Hz.
Remote Level/Crossover Control: Using an optional remote control, you can control the bass output level and crossover frequency of the subwoofer from a remote location.
Controls
Level Control: There is a rotary control on the rear-panel that allows you to adjust the level of the subwoofer.
Crossover Control: The unit's rotary control is found on the rear-panel and allows you to adjust the low-pass filter from 60 to 250 Hz.
Power LED: If power, ground and remote are connected properly, the LED on back of the unit will illuminate in green.
Connections
Remote Control: Phone-type jack for use with an optional remote control; found on rear-panel.
Power Harness: Two quick-slides for use with supplied power harness; found on rear-panel.
Signal Harness: 14-pin Molex plug for use with supplied signal harness
Installation
Installation: Each mounting strap has an attached mounting base that can be secured to your vehicle using the supplied self-tapping screws. Once the mounting bases are installed, the tube is held in place by the mounting straps. For best results, the tube should be mounted facing into a corner, and there should be 2" to 4" between the woofer and the corner into which the woofer is pointing.
Required Accessories:
- Power Wire: the 12-gauge power lead is only 11" long, so additional wire is required to extend it to the battery. Additional power wire must be crimped or soldered to the Bazooka's power lead.
- Ground Wire: the 12-gauge ground lead is also only 23" long, and may need to be extended. Additional ground wire must be crimped or soldered to the Bazooka's ground lead.
- Speaker Wire: required only when using the high-level inputs
- RCA Patch Cord: required only when using the low-level inputs
- Remote Turn-on Wire: required to connect the remote turn-on lead to the amplifier turn-on lead of your radio
Loading...
Loading accessories...
Customer Q&A
7 questions already asked
Loading...
Loading articles...
I was pleasantly surprised at the sound quality that this speaker puts out. it is an awsome speaker and would recommend to anybody looking for a all in one subwoofer
no from Long Beach, CA