About the Bazooka MA275D
Big-time power from a compact amp
Big-time power from a compact amp
Bazooka's compact MA275D marine amplifier provides high-efficiency Class-D power for your marine audio system. This amp is engineered to meet tough marine-grade protection standards, so you won't have to worry about salt and spray damaging your amp while you're blasting around on the lake or cruising out into open water for a long day of fishing.
This sleek Class D marine amp offers a very low profile for easy installation.
Plenty of sound, plus room to grow
The MA275D 2-channel amp delivers the power you need to drive a pair of full-range speakers in your boat, sending 75 watts continuous power to each speaker. You can also bridge the amp to single-channel mode to deliver 225 watts to a marine subwoofer. This rugged amp features both high-pass and low-pass filters, so you can adjust the output to suit your system.
Bazooka's designers know what boaters want from an amplifier, so they designed this amp to be compact, cool, efficient, and powerful. You can mount the MA275D in a storage locker, console, or other tight spot without sacrificing space you'd rather use for extra lines, life jackets, and other boating gear.
Product highlights:
- 2-channel marine amplifier
- 75 watts RMS x 2 at 4 ohms (100 watts RMS x 2 at 2 ohms)
- 170 watts RMS x 1 in bridged mode (4-ohm stable in bridged mode)
- variable high- and low-pass filters, bass boost
- bass boost: 0-12dB
- durable water-resistant shell
- remote bass control included
- dimensions: 4-7/8"D x 9-1/8"W x 1-13/16"H
- warranty: 1 year
- MFR # MA275D
What's in the box:
- 2-Channel Marine amplifier with 20A ATO fuse installed
- Remote Bass Control with attached 12.5' cable (RJ25 plug)
- 12" Speaker level input harness (10-pin Molex plug)
- 2 Angle brackets
- 4 Self-tapping screws (1" length)
- 4 Sheet metal screws
- 4 Flat washers
- 4 Split lock washers
- 2 Self-tapping screws for remote (3/8" length)
- Owner's Manual
Customer reviews for Bazooka MA275D
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Bazooka MA275D
Features & specs
Performance | ||
---|---|---|
RMS Power Output (Watts x Channels) | 75 x 2 | |
Frequency Response at Rated RMS Power | --- | |
THD at Rated RMS Power | --- | |
Signal to Noise Ratio | 90 dB | |
Input Voltage | 14.4v | |
Peak Power Output (Watts x Channels) | N/A | |
Power at 2 Ohms (Watts x Channels) | 100 x 2 | |
Bridged Power (Watts x Channels) | 170 x 1 | |
Minimum Impedance Bridged | 4 | |
Minimum Impedance Unbridged | 2 | |
Features | ||
Amplifier Class | D | |
Low-Pass Crossover Frequency | 50-500Hz | |
Low-Pass Slope (dB/octave) | --- | |
High-Pass Crossover Frequency | 50-500Hz | |
High-Pass Slope (dB/octave) | --- | |
Bass Boost | 0-12dB | |
Bass Boost Frequency | N/A | |
Fan Cooled | No | |
Fuse Rating | 20 | |
Speaker Level Inputs | Yes | |
Preamp Outputs | No | |
Height (inches) | 1-13/16 | |
Width (inches) | 9-1/8 | |
Depth (inches) | 4-7/8 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year |
Product Research
Features
Overview: The Bazooka MA275D is a 2-channel Class D marine amplifier. It comes with a Remote Bass Controller to let you adjust the volume from the driver's seat or from the cabin of your vessel. Also included are mounting brackets and stainless steel hardware.
Power Output: The MA275D has the following power output specifications:
- 75 watts RMS x 2 channels at 4 ohms
- 100 watts RMS x 2 channels at 2 ohms
- 170 watts RMS x 1 channel at 4 ohms bridged
Controls: The MA275D's controls are conveniently located on one side for easy access. The controls include:
- Input Level: The rotary Input Level control lets you match the amplifier with the strength of the input signal from the source unit. The range is 0.2V to 6.0V. The control can be adjusted by hand, or with a small screwdriver (not included).
- Crossover: The built-in crossover is adjustable from 50Hz to 500Hz. You can set the crossover mode to low-pass, high-pass, or flat. The frequency knob can be adjusted by hand or with a small screwdriver.
- Boost: The amplifier features both a bass boost and a treble boost, adjustable via independent rotary control from 0 to 12dB. No center frequencies are provided.
Remote Bass Control: The amp has an RJ25 jack for connecting the supplied Remote Bass Control. The gain of the amplifier can be adjusted remotely from 0.2V to 6V using the remote knob. The Remote Bass Control module can be installed in the driver's seat of your vehicle, or at the helm or in the cabin of your vessel. The attached cable is 12.5 feet in length.
Connections: The power and speaker connections feature set screw terminals. The power, ground, and turn-on (remote) terminals will accept up to 6 AWG wire. The speaker terminals will accept up to 10 AWG wire. All of the set screw terminals can be tightened/loosened with a flat head or Phillips head screwdriver (not supplied). A 20A fuse should be installed on the power wire with 18" of the battery. A pair of RCA jacks is provided for connecting the input signal cable from the source unit. In addition, a speaker-level input harness is included, which plugs into the side of the amp via a Molex plug. Two speaker outputs from the source unit should be spliced into the harness.
Specifications:
- Frequency Response: 20Hz - 20kHz
- Total Harmonic Distortion: 0.1%
- Signal-to-Noise Ratio: 90dB
- Channel Separation: 55dB
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Paired this Bazooka amp with a 8" Bazooka sub. Great amp, easy installation, planning on where to mount a 2nd sub on the 2nd channel.
KD from Waco, TX