About the Bazooka MBTA10100
Big bass for tight spaces
Big bass for tight spaces
Bazooka's marine-ready MBTA10100 10" amplified Bass Tube will add some clout to your nautical audio system. This space-saving sub offers an ideal solution if you want the thrill of powerful bass in your boat but don't want to make a lot of modifications.
The Bass Tube features a 10" woofer and a built-in 100-watt amp housed in a UV- and moisture-resistant enclosure, and it comes with an installation kit that includes a power/signal harness and mounting straps. Speaker- and preamp-level inputs ensure it can be connected to almost any radio.
An optional wired Remote Bass Control Module gives you independent cockpit volume control of the bass output.
Product highlights:
- marine-ready 10" amplified Bass Tube
- waterproof 10" woofer with foam surround
- power output: 100 watts RMS
- low-pass filter (85 Hz, 18 dB/octave)
- subsonic filter (12 dB/octave at 35 Hz)
- frequency response: 39-85 Hz
- sensitivity: 107 dB
- speaker- and preamp-level inputs
- 20-7/8"W x 10-3/8"H x 12-1/4"D
- warranty: 1 year
- MFR # MBTA10100
What's in the box:
Bazooka MBTA10100 owner's manual
- 1 White amplified marine tube-style subwoofer with attached grille
- 2 White mounting straps
- 2 White mounting plates
- Four 1" stainless steel self-tapping screws
- Power/Input wiring harness with 14-pin Molex plug
- 7.5-amp blade fuse with fuse holder
- 1 Crimp-on power ring
- 3 Butt connectors
- 1 Self-tapping screw
- Installation manual
- Bazooka product guide
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Customer reviews for Bazooka MBTA10100
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Bazooka MBTA10100
Product Research
Features
Controls
Connections
Installation
Features
Marine Grade Construction: The MBTA10100 tube features a 10" waterproof woofer. The enclosure is certified salt fog and UV resistant for 5 years and the included mounting hardware is stainless steel.
Amplifier: The 10" woofer is powered by a built-in 100-watt RMS amplifier.
Moisture Resistant Enclosure: The enclosure is moisture, UV, and salt fog resistant for reliable operation in all conditions.
Low-pass Crossover: This unit has a low-pass filter at 85Hz with a slope of 18dB/octave.
Subsonic Filter: The subsonic filter, set at 35Hz, prevents really low frequencies from being amplified. This allows the amplifier to run more efficiently with increased power output.
Remote Level Control: Using an optional wired remote (item # 204RBCM100) you can control the bass output level of the subwoofer from a remote location.
Balanced Input Circuitry: Balanced low-level and high-level input circuitry is used for improved noise reduction.
Controls
Back Panel:
- Level Control: rotary control that allows you to adjust the level of the subwoofer
- Input Phase Switch: reverses the phase of the subwoofer
- Power LED: if power, ground and remote are connected properly, the LED will illuminate in green, red indicates the protection mode
Connections
Back Panel:
- Remote Level Control: mini-jack for use with optional remote level control
- Harness: 14-pin Molex plug for supplied power/input wiring harness
Installation
Mounting Method: There are 2 mounting bases that are made to be attached to your vehicle or boat with the provided 1" stainless steel self-tapping screws. Once the mounting bases are installed, the tube can be placed on the bases and secured with the included mounting straps. For best results, the tube should be mounted facing into a corner, and there should be 2 to 4 inches between the woofer and the corner into which it is pointing.
Required Accessories:
- Power Wire: the 16-gauge power lead is only 11.25" long, so additional wire is usually required to extend it to the battery
- Speaker Wire: required only when using the high-level inputs
- RCA Patch Cord: required only when using the low-level inputs
- Remote Turn-on Wire: required when not using the automatic turn-on circuit
The Bazooka MBTA10100 replaces these items
Bazooka SM10A Bass Tube
- UV-resistant ported bass tube with one waterproof woofer
- power output 100 watts RMS
- frequency response 39-120 Hz
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
Very impressed with the sound of this perfect for my boat
Venton from Centreville, MS