Why follow the crowd? They'll be packed around your ride instead, checking out Bazooka's latest — the RX-T1 10" triangle subwoofer! This three-sided bassrocker features a tough-as-nails polypropylene cone, oversized rubber surround, and reinforced basket that'll take whatever you throw at 'em. Bazooka designed this beast for maximum excursion with a 2" voice coil, 40-ounce magnet, extended pole piece, and bumped backplate.

The triangular shape allows you to fit multiple woofers closer together for maximum kick from minimum space — and to fit a single sub where no sub has gone before. The threaded pole piece vent accepts a CHIL plug (optional), allowing the optional CHIL liquid cooling kit to pump cooling fluid into the center of the woofer's motor assembly, increasing power handling capability. Kickin' bass and a cool, new look — the RX-T1 triangle sub will make a believer out of you.

Details:

  • triangular polypropylene cone with oversized rubber surround
  • reinforced basket
  • power range: 50-200 watts RMS
  • peak power handling 450 watts
  • frequency range 20-1,000 Hz
  • SPL 85 dB
  • top-mount depth 6"
  • optional liquid-cooling system improves power handling (to 300 watts RMS) and extends woofer life
  • sealed box volume: 0.6 cubic feet
  • ported box volume: 1.0 cubic feet
  • Recommended Q-Logic Box Type: none
  • 1-year warranty

What's a component sub and why would I want one?

A component sub is simply a speaker that's designed to reproduce bass once it's installed in a compatible enclosure. Think about the impact of a movie soundtrack in a big theater or even in your own home HDTV setup. A component sub can add the same kind of power to the music in your car. And a car sub is not all about the boom that you hear on a street corner (although that's cool too) - you can pair a component sub with your choice of enclosure to get bass just the way you like it, from tight and punchy to fat and loose. And once you experience music in your car with a well-tuned subwoofer, you'll never go back.

Hands-on research

What's in the box?

Download owner's manual

  • One 10" triangle component subwoofer
  • 1 Rubber gasket (installed)
  • Installation Manual

Product Research

Features
Specifications

Features

Triangular Design: The triangular shape allows you to fit multiple woofers closer together for maximum bass from minimum space.

Cone Materials: The polypropylene cone has superior rigidity, which results in super-low distortion. In addition, the cone is also very resistant to environmental extremes.

Surround: For a smoother response and improved durability, the woofer uses an oversized rubber surround.

Kapton Voice Coil Former: The Kapton voice coil former increases magnetic efficiency and effectively dissipates heat, resulting in high thermal power handling.

Extended Pole Piece: The extended pole piece creates a broad magnetic field for superior power handling, precise voice coil control, and very low deep-bass distortion.

Bumped Back Plate: The bumped back plate lets the voice coil reach maximum excursion without bottoming-out.

Venting: The woofer has side and rear vents that provide maximum heat dissipation for cool operation, resulting in higher power handling and lower distortion.

Optional Liquid-cooling System: The threaded pole piece vent accepts a CHIL plug (optional), allowing the optional CHIL liquid cooling kit to pump cooling fluid into the center of the woofer's motor assembly. Using the optional CHIL plug can increase the woofer's power handling up to 50%. The resulting maximum RMS power is 300 watts and the maximum peak power is 450 watts.

Nickel-plated Spring Posts: The nickel-plated spring posts will accept pin connectors and bare wire.

Rubber Magnet Boot: A black rubber boot covers the exposed edge of the magnet structure to improve the cosmetics of the woofer and protect the magnet during installation.

Enclosure Compatibility: This woofer can provide extended bass in sealed and ported enclosures (please see the "Specifications" section for more information on the recommended enclosures).

Specifications

Recommended Sealed Box Volume: Bazooka recommends a sealed enclosure with an internal volume of 0.6 cu/ft.

Recommended Ported Box Volume: Bazooka recommends a ported enclosure with an internal volume of 1.0 cu/ft and three 13" long ports. Each port is trapezoid-shaped with a maximum width of 4". The manual provides all the necessary dimensions for building this recommended enclosure.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Be the first to review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
Rate the following specific attributes
  Value
 Sound Quality
 Ease of Use
 "Coolness Factor"
 Build Quality
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left