About the Kicker 09RS60.2
Technology that plays well together
Technology that plays well together
Kicker uses much of the technology developed for top-of-the-line QS Series components in their RS Series speakers, so you can get top-notch sound at a good value. The RS60.2 6-1/2" component system, for instance, uses a woofer with a cast-aluminum frame and a seriously beefy motor structure to play at high levels with total dependability. The woofer's tough polypropylene cone responds instantly and relentlessly so its performance stays consistent when you call for more output and more music.
The right stuff for great sound
The RS Series 1" elliptical dome tweeter disperses the sound in a wide field, so everyone in your car hears a good mix. You can mount the tweeter directly on the woofer for a more convenient installation, or install it as a separate component for better musical detail and imagery. And you can bi-amp these speakers through their crossover networks, driving the tweeters and woofers with separate amplifiers for increased power and tone control. With three selectable tweeter levels, you can get the best match of highs and lows for your vehicle.
Note: Kicker describes this model as a 6" woofer. Most manufacturers designate this same frame size as 6-1/2". For simplicity's sake we list it as a 6-1/2" woofer.
Product highlights:
- component speaker system includes two 6-1/2" woofers, 2 tweeters, 2 crossovers, and 2 woofer grilles
- polypropylene woofer cone with Santoprene™ surround
- 1" Tetoron® (polyester film) elliptical dome tweeter
- tweeter can be mounted separately or coaxially on woofer with included adapter
- phase plug provided for woofer when tweeter is mounted separately
- 2-way external crossover networks (high-pass: 18 dB/octave, 3.5K Hz; low-pass: 12 dB/octave, 3.5K Hz)
- tweeter output level control (0, +3, +6 dB) on crossovers
- crossovers can be bi-amped
- power range: 15-90 watts RMS (180 watts peak power)
- frequency response: 50-21,000 Hz
- sensitivity: 87 dB
- woofer top-mount depth: 2-5/16"
- warranty: 1 year
- MFR # 09RS602
What's in the box:
Kicker 09RS60.2 owner's manual
- 2 Woofers
- 2 Tweeters
- 2 Crossovers
- 2 Woofer grilles
- 2 Flush mount tweeter rings
- 2 Short tweeter mounting nuts
- 2 Long tweeter mounting nuts
- 2 Back angled tweeter rings
- 2 Front angled tweeter rings
- 2 Coaxial mount tweeter adapters
- 2 Crossover full range input jumpers
- Owner's manual (English/ Spanish/ German/ French)
Customer reviews for Kicker 09RS60.2
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kicker 09RS60.2
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | 1" Eliptical Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Tetoron | |
Woofer Composition | Polypropylene | |
Woofer Surround | Santoprene | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 87 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 50 - 21k Hz | |
Minimum RMS Wattage | 15 | |
Maximum RMS Wattage | 90 | |
Peak Power Handling (Watts) | 180 | |
Top-mount Depth (Inches) | 2 5/16 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 5 | |
Mounting Height (Inches) | 0.4 | |
Frame Width | 6.25 | |
Frame Length | 6.25 |
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...