About the Kicker 11PT10CA
Add bass to tight spaces
Add bass to tight spaces
Do you want to add some bass to your ride without losing storage space? Take a look at the Kicker 11PT10CA powered subwoofer — its heavy-duty enclosure is slim enough to fit in many locations and powerful enough to help fill in the low end of your sound system.
Kicker's 11PT10CA powered sub offers extensive controls for tailoring your bass.
A perfect match
It can be tough matching subs, amps, and enclosures together. Kicker's taken the guesswork out of the process by matching a 100-watt RMS amplifier with a 10" subwoofer, and housing them together in a rugged, compact box. This way, you won't have to waste time juggling specs — just focus on enjoying your bass. You can adjust the low-pass crossover, bass boost, and phase switch to make sure you're getting maximum low-frequency punch in your vehicle.
Out in a jiffy
A quick-connect power harness and removable straps make it easy to pull this sub out of your vehicle, so you can get some storage space back in a pinch. The enclosure is only 7-3/8" deep so it'll fit in a variety of spaces, while the carpet covering will protect the enclosure and your vehicle against scratches and dents.
Important note: The input harness for this powered enclosure does not include RCA connectors. If you wish to hook your 11PT10CA via RCA connections, you'll need to get the KISL adapter as well.
Product highlights:
- powered 10" subwoofer enclosure
- Class D amplifier (100 watts RMS)
- remote bass-level control included
- variable low-pass crossover (50-120 Hz, 12 dB/octave)
- phase switch (0°, 180°)
- variable bass boost (0-6 dB)
- frequency response: 25-120 Hz
- 20"W x 12-7/8"H x 7-3/8"D1 x 4-1/2"D2
- warranty: 1 year
- MFR # 11PT10CA
What's in the box:
Kicker 11PT10CA owner's manual
- Subwoofer enclosure loaded with one 10" woofer and built-in amplifier
- Two 7.5 amp ATO fuses (one installed in enclosure)
- Wiring harness
- In-line fuse holder
- 15 amp ATO fuse (installed in fuse holder)
- Remote bass level control
- Metal bracket (for mounting remote bass level control)
- 20' Remote bass level control cable (3.5mm plug on both ends)
- Two 3/8" Self-tapping screws
- Four 1-3/8" Self-tapping screws
- 4 Washers
- 2 Velcro mounting straps
- 2 Crimp-on ring terminals (10-12 AWG)
- 1 Crimp-on Butt Splice connector (10-12 AWG)
- Instruction manual (English/ Spanish/ German/ French)
Customer reviews for Kicker 11PT10CA
Loading...
Loading reviews...
Average review:
4.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kicker 11PT10CA
Features & specs
General | ||
---|---|---|
Enclosure Type | Sealed | |
Finish Material | Carpet | |
Grille | Metal | |
Connector Type | Harness | |
Quick-disconnect Plug | --- | |
Bi-amp Inputs | N/A | |
Woofer Size (inches) | 10 | |
Woofer Material | Polypropylene | |
Passive Radiator | --- | |
Width | 20" | |
Height | 12-7/8" | |
Depth | 7-3/8" | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Frequency Response | 25-120 | |
Amplifier Power (RMS) | 90 watts | |
Maximum Wattage | N/A | |
Sensitivity | N/A | |
Impedance | N/A | |
Second Voice Coil Impedance | N/A | |
Crossover Point | 50-120 |
Product Research
Features
Amplifier: The power output from the built-in class-D amplifier is 90 watts RMS @ 14.4 volts with no more than 1% THD (100 watts RMS @ 14.4 volts and 10% THD).
Signal Input: The signal input wires on the included harness can be used with a speaker level or line level signal. Standard speaker wire is used in the harness, so an RCA to speaker wire adapter is needed when using a line level signal (item number 206KiSL, sold separately).
Low Pass Crossover: The amplifier's low pass crossover point is continuously variable from 50 to 120 Hz; the crossover slope is 12 dB per octave.
Subsonic Filter: In addition to the low pass crossover, the PT10 features a 24 dB/octave subsonic filter fixed at 25 Hz. Ultra-low frequencies that cannot be reproduced by a subwoofer do not become sound, but unnecessary oscillations that cause distortion. These frequencies also waste amplifier power and can damage the speaker. The built-in subsonic filter removes the frequencies below 25 Hz to improve the sound quality by eliminating harmful distortion.
Bass Boost: The bass boost circuit provides a variable (0-6 dB) signal boost centered at 40 Hz.
Status Indicator Light: There is a status indicator LED on the control panel on the left side of the enclosure; it lights green to indicate that the amplifier is turned on and operating normally and lights Red to indicate the amplifier's protection circuitry has been activated.
Remote Bass Level Control: The included remote bass level control lets you adjust the output level of the amplifier from anywhere in the vehicle. A 20' cable is included and when it's plugged in, the gain control on the side of the enclosure is bypassed. The remote bass level control can be mounted under the dash with the included mounting hardware and has the following dimensions:
- Width: 2.5"
- Height: 1.2"
- Depth: 1.75" (3.1" including the knob and cable)
Controls: All the PT10's controls and connections are located on the left side:
- Auto Turn-On: two position switch; choose +12V (amp turns on when +12 volts is applied to the remote turn-on wire) or DC Offset (amp turns on when a 6 volt surge is detected from a speaker-level source on the signal inputs)
- Input Level: two position switch; choose Hi when using a speaker level input, Lo when using a line level input
- Phase: two position switch, the sub's phase can be easily inverted; 0° or 180°
- Gain: rotary knob; continuously variable from 125mV to 5V when the Input Level switch is set to Lo, 250mV-10V when the Input Level switch is set to Hi
- X-Over Frequency: rotary knob; set the low pass x-over point; continuously variable from 50 Hz to 120 Hz
- Bass Boost: rotary knob; continuously variable from 0 to +6 dB
Connections:
- Remote Bass: 3.5mm mini-jack for use with the included remote bass level control
- Fuse: a single 7.5 amp ATO style fuse protects the amplifier
- Wiring Input: Molex plug for use with the included
power/ground/remote turn-on/signal input harness; the wire length varies
by function:
- Ground: 2'
- Signal Input: 8'
- Power: 17'
- Remote Turn-on: 2'
The Kicker 11PT10CA replaces these items
Kicker 11PH12
- hatchback-style powered enclosure with one 12" subwoofer
- built-in Class D amplifier (90 watts RMS)
- remote bass-level control included
Kicker 11PT10
- hatchback-style powered enclosure with one 10" subwoofer
- built-in Class D amplifier (90 watts RMS)
- remote bass-level control included
Loading...
Loading accessories...
Customer Q&A
2 questions already asked
Loading...
Loading articles...
If you are looking for a low cost "bump" to your system, this is it. You won't find a better powered sub for your money. Almost fits completely under rear bench seat in my 1991 Silverado extra-cab.
Jakesaidso from Texas