Dual Voice Coils: For increased
system flexibility, the woofer has two 4 ohm voice coils. When the voice coils
are wired in parallel, the woofer presents a 2 ohm load. When the voice coils
are wired in series, the woofer presents an 8 ohm load. In addition, each coil
may be connected to a different amplifier channel and each channel will see a 4
The Comp VR's super-rigid injection-molded polypropylene cone features 360-degree back bracing
to completely eliminate flex and distortion.
Surround: The optimized
ribbed Santoprene surround allows extended cone excursion for
additional bass output and higher SPL. The surround is double-stitched to the
cone to add a mechanical fastener to the chemical adhesives. This prevents the
cone and surround from separating in the harshest conditions.
Spiralead Tinsel Leads: The Comp VR features durable Spiralead tinsel
leads, which are woven into the woofer's progressive-roll polycotton spider, for
added strength and reliability.
Basket and Motor Assembly: The strong steel basket features perimeter
venting to help cool the high-temperature voice coil wires and prevent
breakdown. The overall motor structure design is based on technology found in
Kicker's flagship Solo-Baric line of subwoofers, and allows the sub to handle
more power and take more abuse. The high-mass solid pole piece removes
potentially damaging heat.
Speaker Terminals: The
spring loaded, nickel-plated terminals provide solid connections for speaker
wire up to 8 gauge. Single banana plugs and pin connectors will also fit.
Due to the complex nature of Kicker Comp VR speakers, they require a
break-in period in order to produce optimum low-bass response. The
high-performance suspension system makes the speaker very stiff
out-of-the-box. Approximately 2 weeks of daily playing will allow
the suspension to break-in and reach its optimum equilibrium. A
broken-in subwoofer will exhibit stronger bass performance, smoother
response, and greater low-bass extension.
Rubber Magnet Boot: A black rubber boot
covers the outside edge of the magnet structure to improve the cosmetics of the
woofer and protect the magnet during installation.
Power Handling: The
power handling specifications differ according to the type and size of the
enclosure. The power handling specifications assume that both voice coils are in
use. Note: Both voice coils in a dual voice coil speaker should always be
Recommended Sealed Box
- Compact (minimum enclosure
volume): 1.0 cu/ft; the woofer can handle up to 400 watts RMS (200 watts
per voice coil)
SQ (maximum enclosure volume):
4.6 cu/ft; the woofer can handle up to 300 watts RMS (150 watts per voice
Recommended Vented Box
- Compact: 1.75 cu/ft;
2.5" x 12.5" port opening; 20" port depth; the woofer can
handle up to 300 watts RMS (150 watts per voice coil)
SQ: 2.25 cu/ft; 3" x
12.5" port opening; 20.5" port depth; the woofer can handle up to
300 watts RMS (150 watts per voice coil)
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.