Dual Voice Coils: For increased system flexibility, the woofer
has two 2 ohm voice coils. When the voice coils are wired in parallel, the woofer
presents a 1 ohm load. When the voice coils are wired in series, the woofer presents
a 4 ohm load. In addition, each coil may be connected to a different amplifier
channel and each channel will see a 2 ohm load.
Cone Design: The Comp VR's super-rigid injection-molded polypropylene
cone features 360-degree back bracing to completely eliminate flex and distortion.
Surround: The optimized ribbed Santoprene surround allows extended
cone excursion for additional bass output and higher SPL. The surround is double-stitched
to the cone to add a mechanical fastener to the chemical adhesives. This prevents the
cone and surround from separating in the harshest conditions.
Spiralead Tinsel Leads: The Comp VR features durable Spiralead tinsel
leads, which are woven into the woofer's progressive-roll polycotton spider, for added
strength and reliability.
Basket and Motor Assembly: The strong steel basket features
perimeter venting to help cool the high-temperature voice coil wires and prevent
breakdown. The overall motor structure design is based on technology found in
Kicker's flagship Solo-Baric line of subwoofers, and allows the sub to handle
more power and take more abuse. The high-mass solid pole piece removes
potentially damaging heat.
Speaker Terminals: The spring loaded, nickel-plated terminals
provide solid connections for speaker wire up to 8 gauge. Single banana plugs and
pin connectors will also fit.
Break-in Period: Due to the complex nature of Kicker Comp VR
speakers, they require a break-in period in order to produce optimum low-bass response.
The high-performance suspension system makes the speaker very stiff out-of-the-box.
Approximately 2 weeks of daily playing will allow the suspension to break-in and reach
its optimum equilibrium. A broken-in subwoofer will exhibit stronger bass performance,
smoother response, and greater low-bass extension.
Rubber Magnet Boot: A black rubber boot covers the outside edge
of the magnet structure to improve the cosmetics of the woofer and protect the magnet
Power Handling: The power handling specifications differ according
to the type and size of the enclosure. The power handling specifications assume that
both voice coils are in use. Note: Both voice coils in a dual voice
coil speaker should always be connected.
Recommended Sealed Box Volume:
- Compact (minimum enclosure volume): 1.8
cu/ft; the woofer can handle up to 500 watts RMS (250 watts
per voice coil)
SQ (maximum enclosure volume): 5.2 cu/ft;
the woofer can handle up to 500 watts RMS (250 watts per
Recommended Vented Box Volume:
- Compact: 3.0 cu/ft; 2.75" x
15.5" port opening; 25.75" port depth; the
woofer can handle up to 500 watts RMS (250 watts per
SQ: 5.0 cu/ft; 3" x 15.5"
port opening; 22" port depth; the woofer can
handle up to 500 watts RMS (250 watts per voice coil)
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.