Skip Navigation

Kicker 10CVR84

CompVR 8" subwoofer with dual 4-ohm voice coils

3 Reviews

Item #: 2061CVR84

This item is no longer available.

Shop all Component Subwoofers

99.99

Overview

Our take on the Kicker 10CVR84

Kicker CompVR subs let you kick out the jams without tearing a hole in your wallet. These subs handle plenty of power, and get their fierce sound from tough, injection-molded polypropylene cones with reliable Santoprene™ surrounds. The unique SoloKon™ cone with its 360-degree back bracing keeps going strong when the bass gets heavy, while perimeter venting in the strong steel basket keeps the voice coils cool for dependable performance.

Kicker CompVR subs let you kick out the jams without tearing a hole in your wallet. These subs handle plenty of power, and get their fierce sound from tough, injection-molded polypropylene cones with reliable Santoprene™ surrounds. The unique SoloKon™ cone with its 360-degree back bracing keeps going strong when the bass gets heavy, while perimeter venting in the strong steel basket keeps the voice coils cool for dependable performance.

The 10CVR84 8" sub sports dual 4-ohm voice coils that give you more wiring options when setting up your system. The sub's cool-looking black finish highlights the potent low end you'll hear and feel. Boat owners: Kicker certifies the CompVR subs for marine use, so you can generate some serious bass waves out on the water.

Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible. Most car amplifiers are stable down to 2 ohms in standard mode, or 4 ohms in bridged operation.

Priced per speaker

This speaker sounds great for my application and was very reasonable.

PhilB, Venice FL

What's in the Box:

  • One 8" dual voice coil subwoofer
  • Owner's Manual
  • 2 Large Kicker decals
  • 2 Small Kicker decals

Product Highlights:

  • 8" subwoofer with dual 4-ohm voice coils
  • injection-molded polypropylene cone
  • ribbed Santoprene rubber surround
  • suitable for marine use
  • power handling: 50-200 watts RMS (100 watts per coil)
  • 400 watts peak power handling
  • frequency response: 30-500 Hz
  • sensitivity: 82.8 dB
  • top-mount depth: 4-1/4"
  • sealed box volume: 0.4-1.8 cu. ft.
  • ported box volume: 0.8-1.2 cu. ft.
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Kicker 10CVR84

Average Customer Review(s):

(3 Reviews)

Great deal

PhilB from Venice FL on 10/22/2012

Crutchfield Customer Review (What's this?)

This speaker sounds great for my application and was very reasonable.

Pros: Does the job for little money

Cons: Was a little tight for my suburban but just had to use spacer off old speaker to make it work.

Kicker 10CVR84

bjk from Boyne City, MI on 11/6/2011

Crutchfield Customer Review (What's this?)

Installed in a self built .9 cu. ft. non ported enclosure with a dedicated 350 watt amp. This delivers all the low end sound my Jeep needs with or without the top on. Very tight hard hitting bass without all the obnoxious rumble of some set ups. Very impressive sound in a relatively small package.

Pros: Excellent tight bass.

Cons:

Good Sub

Carl from Chicago on 9/7/2011

Much better bass with this in a 2002 tahoe (factory box used).

Pros:

Cons:

Details

Hands-on research

Product Research

Features
Enclosure Compatibility

Features

Dual Voice Coils: For increased system flexibility, the woofer has two 4 ohm voice coils. When the voice coils are wired in parallel, the woofer presents a 2 ohm load. When the voice coils are wired in series, the woofer presents an 8 ohm load. In addition, each coil may be connected to a different amplifier channel and each channel will see a 4 ohm load.

Cone Design: The Comp VR's super-rigid injection-molded polypropylene cone features 360-degree back bracing to completely eliminate flex and distortion.

Surround: The optimized ribbed Santoprene surround allows extended cone excursion for additional bass output and higher SPL. The surround is double-stitched to the cone to add a mechanical fastener to the chemical adhesives. This prevents the cone and surround from separating in the harshest conditions.

Spiralead Tinsel Leads: The Comp VR features durable Spiralead tinsel leads, which are woven into the woofer's progressive-roll polycotton spider, for added strength and reliability.

Basket and Motor Assembly: The strong steel basket features perimeter venting to help cool the high-temperature voice coil wires and prevent breakdown. The overall motor structure design is based on technology found in Kicker's flagship Solo-Baric line of subwoofers, and allows the sub to handle more power and take more abuse. The high-mass solid pole piece removes potentially damaging heat.

Speaker Terminals: The spring loaded, nickel-plated terminals provide solid connections for speaker wire up to 8 gauge. Single banana plugs and pin connectors will also fit.

Break-in Period: Due to the complex nature of Kicker Comp VR speakers, they require a break-in period in order to produce optimum low-bass response. The high-performance suspension system makes the speaker very stiff out-of-the-box. Approximately 2 weeks of daily playing will allow the suspension to break-in and reach its optimum equilibrium. A broken-in subwoofer will exhibit stronger bass performance, smoother response, and greater low-bass extension.

Rubber Magnet Boot: A black rubber boot covers the outside edge of the magnet structure to improve the cosmetics of the woofer and protect the magnet during installation.

Enclosure Compatibility

Power Handling: The power handling specifications differ according to the type and size of the enclosure. The power handling specifications assume that both voice coils are in use. Note: Both voice coils in a dual voice coil speaker should always be connected.

Recommended Sealed Box Volume:

  • Compact (minimum enclosure volume): 0.4 cu/ft; the woofer can handle up to 200 watts RMS (100 watts per voice coil)
  • SQ (maximum enclosure volume): 1.8 cu/ft; the woofer can handle up to 140 watts RMS (70 watts per voice coil)

Recommended Vented Box Volume:

  • Compact: 0.8 cu/ft; 1.5" x 8" port opening; 20.75" port depth; the woofer can handle up to 75 watts RMS (37.5 watts per voice coil)
  • SQ: 1.2 cu/ft; 2" x 8" port opening; 19.125" port depth; the woofer can handle up to 75 watts RMS (37.5 watts per voice coil)

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Library