About the Kicker 11PXI50.2
Bring your music out where you work and play
Bring your music out where you work and play
Kicker's little PXi50.2 amp lets you set up a sound system in any vehicle with a 12-volt electrical system, including sit-down mowers, tractors, ATVs, or motorcycles. Just hook up some speakers, plug in your iPod or iPhone, and you'll have access to your tunes loud and clear. Imagine how simple this makes getting music onto your boat or even a forklift. Kicker recommends pairing the PXi50.2 with a set of PS5250 5-1/4" Powersports speakers.
Use the remote to navigate your playlists
Versatile little music-maker
The weather-resistant amp module sends up to 25 watts RMS to your speakers so you'll hear all your music's details and feel the beat. You can tuck your iPod away in a safe spot, because the illuminated remote controller provides easy navigation through your playlists and songs. The PXi50.2 also provides rapid-charging, so your player will be fully charged when you bring it home. Kicker even includes an auxiliary input to accommodate other kinds of MP3 devices, along with RCA outputs that allow you to add some powered speakers or a powered sub.
Product highlights:
- 2-channel amplifier and controller for iPod or iPhone
- 15 watts RMS x 2 at 4 ohms (25 watts RMS x 2 at 2 ohms)
- works in any vehicle with a 12-volt charging system
- 6-foot cable with Apple®-certified dock
- auxiliary input and outputs
- back-lit blue LED wired remote with large rubber buttons
- weather-resistant
- 12-gauge power and ground wires and a 10-amp in-line fuse recommended
- 5-11/16"W x 2-1/8"H x 3-5/8"D
- warranty: 2 years
- MFR # 11PXI502
What's in the box:
Kicker 11PXI50.2 owner's manual
- 2-Channel amplified controller for iPod/iPhone (with multiple 4" pigtails)
- Wired remote/controller with attached 5.5' cable
- Plastic mount for wired remote/controller
- Bar mounting bracket
- 70" iPod connector cable (with iPod dock connector on one end and a 13-pin DIN connector on the other end)
- 24" Wiring harness with female 3.5mm aux input and stereo RCA output jacks
- 4 Phillips-head pan-washer screws (length=3/4")
- 4 Split lock washers
- 4 Phillips-head pan screws (length=1/4")
- Instructions
Customer reviews for Kicker 11PXI50.2
Loading...
Loading reviews...
Average review:
4.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kicker 11PXI50.2
Features & specs
Performance | ||
---|---|---|
RMS Power Output (Watts x Channels) |
15 x 2 | |
Peak Power Output (Watts x Channels) | --- | |
Power at 2 Ohms (Watts x Channels) | 25 x 2 | |
Power at 1 Ohm (Watts x Channels) | --- | |
Bridged Power (Watts x Channels) | --- | |
Minimum Impedance Bridged | --- | |
Minimum Impedance Unbridged | 2 | |
Minimum Impedance | 2 | |
Best Frequency Response | 20-20k Hz | |
THD at Rated RMS Power | --- | |
Signal to Noise Ratio | 90 dB | |
Input Voltage | --- | |
Features | ||
Amplifier Class | Not Given | |
Low-Pass Crossover Frequency | N/A | |
Low-Pass Slope (dB/octave) | N/A | |
High-Pass Crossover Frequency | N/A | |
High-Pass Slope (dB/octave) | N/A | |
Bass Boost | No | |
Bass Boost Frequency | N/A | |
Fan Cooled | No | |
Fuse Rating | 10 | |
Speaker Level Inputs | --- | |
Preamp Outputs | 1 pair | |
Width (inches) | 5-11/16 | |
Height (inches) | 2-1/8 | |
Depth (inches) | 3-5/8 | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years |
Product Research
Features
Overview: The Kicker PXi50.2 is a simple 2-channel amplifier that allows you to listen to your iPod or iPhone in a vehicle without a built-in music source. This Amplified Controller for iPod and iPhone can be installed in boats, ATVs, utility vehicles, golf carts, tractors, snowmobiles, hot rods, motorcycles, and riding lawnmowers. The PXi50.2 provides a 5-volt fast-charge current for the iPod/iPhone, and pause playback when power is off.
Components: The PXi50.2 consists of the following components:
- Amplifier: A simple 2-channel amp with a weather-resistant cover and multiple 4" pigtail connections for power, speakers, remote controller, and iPod/iPhone.
- iPod Cable: A 70" cable with a 30-pin iPod dock connector on one end and a 13-pin DIN connector on the amp end. The amp connection has a weather-resistant, screw-on plug.
- Remote Controller: The PXi50.2 comes with an 8-button, weather-resistant, blue backlit remote controller and an attached 5.5' cable. The remote controller can be mounted to a pipe or bar (1.5" diameter max) with the supplied clamp-type mount, flush-mounted using the supplied bracket, or surface-mounted using an adhesive or hook-and-loop fastener (not included).
- Wiring Harness: A 24" wiring harness that provides power connections (constant power, switched power, ground, amp turn-on), speaker wires for 2 speakers (speakers not included), an RCA stereo output, and a 3.5mm auxiliary input for adding another source. Note: A 10A fuse--not included--should be placed in-line with the constant power wire.
Remote Controller: With the remote controller, you can raise and lower the volume, change to next or previous track, select playlists, turn shuffle on or off, and turn off the unit. Dimensions: 3.146"W x 1.568"H x 0.601"D. If flush-mounted, the unit requires a cutout of 3.385" (86mm) x 1.616" (41mm) with a minimum mounting depth of 0.708" (18mm).
iPod Compatibility: The PXi50.2 is compatible with the following iPods and iPhones:
- iPod touch: 1st generation (8GB, 16GB, 32GB), 2nd generation (8GB, 16GB, 32GB), 3rd generation (32GB, 64GB), 4th generation (8GB, 32GB, 64GB)
- iPod classic: 160GB (2009), 160GB (2007), 80GB
- iPod: 5th generation (video): 30GB, 60GB, 80GB
- iPod nano: 1st generation (1GB, 2GB, 4GB), 2nd generation-aluminum (2GB, 4GB, 8GB), 3rd generation--video (4GB, 8GB), 4th generation--video (8GB, 16GB), 5th generation-video camera (8GB, 16GB), 6th generation (8GB, 16GB), 7th generation (Lightning to 30-pin adapter required and not included)
- iPhone: iPhone (4GB, 8GB, 16GB), iPhone 3G (8GB, 16GB), iPhone 3GS (8GB, 16GB, 32GB), iPhone 4 (16GB, 32GB), iPhone 5 (Lightning to 30-pin adapter required and not included) Note: The PXi50.2 is not compatible with iPhone 4S (lab tested)
Additional Inputs/Outputs: In addition to the iPod connection, the PXi50.2 has a 3.5mm auxiliary input for adding an additional source, such as a portable CD, satellite radio, or other MP3 device. There is also a pair of stereo RCA preamp outputs for use with additional amplifiers.
Specifications:
- Power Output: 15 watts RMS x 2 (4 ohms); 25 watts RMS x 2 (2 ohms)
- Frequency Response: 20Hz - 20kHz (+/- 1dB)
- RCA Preout Voltage: 2.5V RMS
- Signal-to-Noise Ratio: 90dB
- Max Current Draw: 10A
- Aux-Input Sensitivity: 500mV to 1.75V
- iPod Charging: 5V @ 1A
Loading...
Loading accessories...
Customer Q&A
3 questions already asked
Loading...
Loading articles...