Chat
Contact us
Close contact box
Connect ID #
488 688 387 4
Connect ID #
488 688 387 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Kicker Solo-Baric L7 Series 11S10L72 10" subwoofer with dual 2-ohm voice coils

Item # 2061S10L72

Kicker builds the Solo-Baric L7 component subwoofer to deliver state-of-the-art bass.

Kicker builds the Solo-Baric L7 component subwoofer to deliver state-of-the-art bass.

4 questions - 4 answers

Item # 2061S10L72

About the Kicker Solo-Baric L7 Series 11S10L72

John Pollard

Immense bass

Kicker builds the Solo-Baric L7 component subwoofer to deliver state-of-the-art bass. An ultra-rigid cast aluminum basket houses the patented SoloKon™ one-piece square cone to create a speaker that moves lots more air than a comparably sized round sub. The precision-built motor structure won't yield to stress, giving you chest-thumping low end that won't quit when you push your system hard.

Immense bass

Kicker builds the Solo-Baric L7 component subwoofer to deliver state-of-the-art bass. An ultra-rigid cast aluminum basket houses the patented SoloKon™ one-piece square cone to create a speaker that moves lots more air than a comparably sized round sub. The precision-built motor structure won't yield to stress, giving you chest-thumping low end that won't quit when you push your system hard.

Solo-Baric L7 Series 11S10L72 10

Built tough

The Solo-Baric L7 Series 11S10L72 10" subwoofer features an injection-molded polypropylene cone that works with a tough Santoprene™ rubber surround to dish out monster bass in a sealed or ported enclosure. Its unusual shape and black finish make a strong style statement, and you can add an optional grille to further enhances its looks. This sub packs dual high-temperature 2-ohm voice coils, giving you the flexibility to build a multiple sub setup or to draw more power from your amp with a low-impedance load.

Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible.

READ LESS

Product highlights:

  • 10" subwoofer with dual 2-ohm voice coils
  • square SoloKon™ polypropylene cone with Santoprene rubber surround
  • aluminum basket
  • handles up to 600 watts RMS (300 watts per voice coil)
  • peak power: 1,200 watts
  • frequency response: 24-100 Hz
  • sensitivity: 85.87 dB
  • mounting depth: 6-5/16"
  • sealed box volume: 1.0-1.25 cubic feet
  • ported box volume: 1.25-2.25 cu. ft.
  • warranty: 1 year
  • MFR # 11S10L72

What's in the box:

  • One square 10" dual 2-ohm voice coil subwoofer
  • Owner's manual (English/ Spanish/ German/ French)
  • 2 Kicker decals
  • Template on box lid

Customer reviews for Kicker Solo-Baric L7 Series 11S10L72

Loading reviews...

Average review:

4.5 out of 5 stars
2 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Kicker Solo-Baric L7 Series 11S10L72

Pat M.

Product Research

Features
Enclosure Compatibility

Features

Dual Voice Coils: For increased system flexibility, the woofer has two 2 ohm voice coils. When the voice coils are wired in parallel, the woofer presents a 1 ohm load. When the voice coils are wired in series, the woofer presents a 4 ohm load.

Square Design: By making the Solo-Baric square, Kicker is giving you the most possible cone area (Sd) for a given size baffle, 16% to 20% more area than a conventional round subwoofer. More cone area means the Solo-Baric L7 moves more air, resulting in louder, deeper bass.

Cone Material: The square SoloKon design is a unique one-piece construction, using polypropylene material that moves as a lightweight piston, for improved control. The cone remains rigid, minimizing cone flex and distortion. A rear cone brace integrates into the cone with a continuous contact perimeter weld, which improves strength and resistance to deformation under pressure.

Surround: The tough, flexible Santoprene rubber surround has a long-throw, positive-roll design, which controls extreme cone excursion and is highly tear-resistant. The corners of the surround are ribbed to ensure linear cone motion. The surround is stitched to the reinforced cone edge, making separation between them virtually impossible, even in the harshest conditions.

Spider: The woofer is equipped with a wide poly-cotton spider which easily handles high cone excursions due to its increased diameter and unique shape.

Enhanced BAM (Basket And Motor) Assembly: The Solo-Baric L7 utilizes a high strength stamped steel basket which features a low-profile open design and provides a solid foundation for the precision-aligned motor assembly. Perimeter venting in the BAM relieves pressure from under the spider, supports linear excursion, and helps dissipate heat from the voice coil and motor structure.

Voice Coils: The dual ultra length voice coils sustain enormous cone excursion and provide flexible impedance matching options. The high-temperature Polyimide Film Voice Coil former improves sonic and conducive properties, and prevents thermal-electrical meltdown. The voice coils are rated to 220° Celsius.

UniPlate Construction: The Solo-Baric L7 features a one-piece UniPlate construction with a vented hyper-extended pole piece and backplate. This unique design provides the following benefits:

  • Optimizes heat transfer efficiency for cooler operation and maximum power handling capability
  • Eliminates erratic magnetic flux from the voice coil gap
  • Releases pressure under the suspension for uniform cone movement and responsive low bass
  • Prevents the voice coil from bottoming out and the corresponding damage

Tinsel Lead Wires: The sleeved, high-power tinsel lead wires eliminate broken leads and power loss, due to the common use of insufficient gauge lead wires. The lead wires are terminated with multiple polymer-based strain relieving mechanical fasteners.

Speaker Terminals: The terminals are spring loaded and nickel plated for solid connections with speaker wire up to 10 gauge.

Break-in Period: Due to the complex nature of Kicker Solo-Baric L7 woofers, they require a break-in period in order to produce optimum low-bass response. The high-performance suspension system makes the speakers very stiff out-of-the-box. Approximately two weeks of daily playing will allow the suspension to break-in and reach its optimum equilibrium. A broken-in subwoofer will exhibit stronger bass performance, smoother response, and greater low-bass extension.

Enclosure Compatibility

Recommended Sealed Box Volume:

  • Compact (minimum enclosure volume): 1.0 cubic feet
  • SQ (maximum enclosure volume): 1.25 cubic feet

Recommended Vented Box Volume:

  • Compact: 1.25 cubic feet; 2.5" x 11.25" port opening; 19.75" port length
  • SQ: 2.25 cubic feet; 3" x 11.25" port opening; 18" port length

Cutout: The woofer will not mount in a standard enclosure with a round cutout. Instead, the woofer must be mounted in an enclosure with a 9.275" x 9.275" square opening.

Loading accessories...

Customer Q&A

4 questions already asked

Q
Can I hook up a kicker 10-inch Solo-Baric subwoofer to a home stereo just to see if it works? Or do you have to have it put on an amp in order for them to work at all if you can how would I wire it
ricardo  Aug 13, 2016
1 answer
A
There are so many potential issues with connecting car subwoofers/speakers to home equipment that I generally say no. It should not be done. However, if you purchased your subwoofer through us, you can call our technical support and they can cover safe ways to test it. HTH! My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=101
jason  Aug 15, 2016 (Staff)
Q
Would a kicker cxa1200.1 drive a L7 15" dual 2ohm good in a vented enclosure?
jason  Aug 10, 2016
1 answer
A
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.
kenneth  Aug 10, 2016 (Staff)
Q
So how much would i want the amp to carry if i got 2 l7 10s?
jose  Jan 25, 2016
1 answer
A
To properly drive two of these L7 10" subs, you'd want an amp to put out between 1,200-1,800 watts RMS at 2-ohm. My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=159
david  Jan 27, 2016 (Staff)
Q
What are recommended amplifiers for this sub only using one of them for max power?
joseph  Nov 26, 2015
1 answer
A
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.
kristina  Nov 26, 2015 (Staff)

Loading articles...

Compare the sound