Chat
Contact us
Close contact box
Connect ID #
842 383 387 4
Connect ID #
842 383 387 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Kicker Solo-Baric L7 Series 11S10L74 10" subwoofer with dual 4-ohm voice coils

Item # 2061S10L74

Kicker builds the Solo-Baric L7 component subwoofer to deliver state-of-the-art bass.

Kicker builds the Solo-Baric L7 component subwoofer to deliver state-of-the-art bass.

3 questions - 4 answers

Item # 2061S10L74

About the Kicker Solo-Baric L7 Series 11S10L74

John Pollard

Immense bass

Kicker builds the Solo-Baric L7 component subwoofer to deliver state-of-the-art bass. An ultra-rigid cast aluminum basket houses the patented SoloKon™ one-piece square cone to create a speaker that moves lots more air than a comparably sized round sub. The precision-built motor structure won't yield to stress, giving you chest-thumping low end that won't quit when you push your system hard.

Immense bass

Kicker builds the Solo-Baric L7 component subwoofer to deliver state-of-the-art bass. An ultra-rigid cast aluminum basket houses the patented SoloKon™ one-piece square cone to create a speaker that moves lots more air than a comparably sized round sub. The precision-built motor structure won't yield to stress, giving you chest-thumping low end that won't quit when you push your system hard.

Solo-Baric L7 Series 11S10L74 10

Built tough

The Solo-Baric L7 Series 11S10L74 10" subwoofer features an injection-molded polypropylene cone that works with a tough Santoprene™ rubber surround to dish out monster bass in a sealed or ported enclosure. Its unusual shape and black finish make a strong style statement, and you can add an optional grille to further enhances its looks. This sub packs dual high-temperature 4-ohm voice coils, giving you the flexibility to build a multiple sub setup or to draw more power from your amp with a low-impedance load.

Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible.

READ LESS

Product highlights:

  • 10" subwoofer with dual 4-ohm voice coils
  • square SoloKon™ polypropylene cone with Santoprene rubber surround
  • aluminum basket
  • handles up to 600 watts RMS (300 watts per voice coil)
  • peak power: 1,200 watts
  • frequency response: 24-100 Hz
  • sensitivity: 85.87 dB
  • mounting depth: 6-5/16"
  • sealed box volume: 1.0-1.25 cubic feet
  • ported box volume: 1.25-2.25 cu. ft.
  • warranty: 1 year
  • MFR # 11S10L74

What's in the box:

  • One square 10" dual 4-ohm voice coil subwoofer
  • Owner's manual (English/ Spanish/ German/ French)
  • 2 Kicker decals
  • Template on box lid

Customer reviews for Kicker Solo-Baric L7 Series 11S10L74

Loading reviews...

Average review:

4.5 out of 5 stars
4 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Kicker Solo-Baric L7 Series 11S10L74

Pat M.

Product Research

Features
Enclosure Compatibility

Features

Dual Voice Coils: For increased system flexibility, the woofer has two 4 ohm voice coils. When the voice coils are wired in parallel, the woofer presents a 2 ohm load. When the voice coils are wired in series, the woofer presents an 8 ohm load.

Square Design: By making the Solo-Baric square, Kicker is giving you the most possible cone area (Sd) for a given size baffle, 16% to 20% more area than a conventional round subwoofer. More cone area means the Solo-Baric L7 moves more air, resulting in louder, deeper bass.

Cone Material: The square SoloKon design is a unique one-piece construction, using polypropylene material that moves as a lightweight piston, for improved control. The cone remains rigid, minimizing cone flex and distortion. A rear cone brace integrates into the cone with a continuous contact perimeter weld, which improves strength and resistance to deformation under pressure.

Surround: The tough, flexible Santoprene rubber surround has a long-throw, positive-roll design, which controls extreme cone excursion and is highly tear-resistant. The corners of the surround are ribbed to ensure linear cone motion. The surround is stitched to the reinforced cone edge, making separation between them virtually impossible, even in the harshest conditions.

Spider: The woofer is equipped with a wide poly-cotton spider which easily handles high cone excursions due to its increased diameter and unique shape.

Enhanced BAM (Basket And Motor) Assembly: The Solo-Baric L7 utilizes a high strength stamped steel basket which features a low-profile open design and provides a solid foundation for the precision-aligned motor assembly. Perimeter venting in the BAM relieves pressure from under the spider, supports linear excursion, and helps dissipate heat from the voice coil and motor structure.

Voice Coils: The dual ultra length voice coils sustain enormous cone excursion and provide flexible impedance matching options. The high-temperature Polyimide Film Voice Coil former improves sonic and conducive properties, and prevents thermal-electrical meltdown. The voice coils are rated to 220° Celsius.

UniPlate Construction: The Solo-Baric L7 features a one-piece UniPlate construction with a vented hyper-extended pole piece and backplate. This unique design provides the following benefits:

  • Optimizes heat transfer efficiency for cooler operation and maximum power handling capability
  • Eliminates erratic magnetic flux from the voice coil gap
  • Releases pressure under the suspension for uniform cone movement and responsive low bass
  • Prevents the voice coil from bottoming out and the corresponding damage

Tinsel Lead Wires: The sleeved, high-power tinsel lead wires eliminate broken leads and power loss, due to the common use of insufficient gauge lead wires. The lead wires are terminated with multiple polymer-based strain relieving mechanical fasteners.

Speaker Terminals: The terminals are spring loaded and nickel plated for solid connections with speaker wire up to 10 gauge.

Break-in Period: Due to the complex nature of Kicker Solo-Baric L7 woofers, they require a break-in period in order to produce optimum low-bass response. The high-performance suspension system makes the speakers very stiff out-of-the-box. Approximately two weeks of daily playing will allow the suspension to break-in and reach its optimum equilibrium. A broken-in subwoofer will exhibit stronger bass performance, smoother response, and greater low-bass extension.

Enclosure Compatibility

Recommended Sealed Box Volume:

  • Compact (minimum enclosure volume): 1.0 cubic feet
  • SQ (maximum enclosure volume): 1.25 cubic feet

Recommended Vented Box Volume:

  • Compact: 1.25 cubic feet; 2.5" x 11.25" port opening; 19.75" port length
  • SQ: 2.25 cubic feet; 3" x 11.25" port opening; 18" port length

Cutout: The woofer will not mount in a standard enclosure with a round cutout. Instead, the woofer must be mounted in an enclosure with a 9.275" x 9.275" square opening.

Loading accessories...

Customer Q&A

3 questions already asked

Q
Does this product come with a sub box?
bryan  Jul 20, 2016
1 answer
A
Thanks for your question. No there is no box included. It does come with a template to help with mounting to a box. Hope that helps.
kenneth  Jul 20, 2016 (Staff)
Q
I have two of these L7 kickers what will be a good amp for these speakers i currently have a alpine amp and these speakers really don't sound how I want them to?
luis  Jan 29, 2014
2 answers
A
If you have a pair of L7 and there not sounding correctly, then you've installed them incorrectly. You really can't mess up with an L7 subwoofer, except for giving it too little power, which is a waste of time. Too answer your question us the (JL audio 1000 V2) and place the system "Q" to mid-band with the crossover roll-off @ 55hz, I assure you'll be impressed!
carlfred  Feb 03, 2014
A
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.
jeff  Jan 31, 2014 (Staff)
Q
Can I fit this in the back of an 2006 F-150. Under the backseat?
david  Dec 14, 2013
1 answer
A
For specific fit information I would recommend contacting an Advisor. They can pull up your vehicle and see if we have fit information for that location in your vehicle.
jeff  Dec 15, 2013 (Staff)

Loading articles...

Compare the sound