Gain: The rotary gain control is continuously variable from
125 mV to 5 V when the Input Sensitivity switch is set to Low and 250 mV to 10 V
when the Input Sensitivity switch is set to High.
Crossover: The crossover can be set to low-pass or off
(full-range). The crossover point is fixed at 80 Hz and
the slope is 24dB per octave.
Auto Turn-on Switch: The amp offers three automatic turn-on
modes; select from:
- +12V: connect a wire from the remote
turn-on lead from your source unit to the REM terminal on
the amplifier; this is the preferred turn-on method
- DC Offset: turns the amp on when a
6-volt DC offset is detected at the high-level speaker
inputs when the source unit is turned on
- Audio: detects the incoming audio
signal from your source unit and automatically turns the
amp on; will not work if the input gain control is not
Bass Boost: The bass boost circuit provides a 12 dB boost
at 40Hz. The bass boost can be turned off if you prefer.
ZXRC Remote Bass Control: The bass output level can be
controlled remotely using an optional wired remote bass control (item number
20610ZXRC, sold separately).
Left Side of Amplifier:
- +12V (power): set screw
- REM (remote turn-on): set
- GND (ground): set screw
- Fuses: two 20-amp ATO fuses
Right Side of Amplifier:
- Speaker Outputs: one pair of set screw
- RCA Input: one pair of stereo RCA
input jacks; also used for speaker level input (item number
20609ZiSL needed, sold separately)
- RCA Output: one pair of stereo RCA output jacks
Amp Wiring Kit: Kicker recommends using a 8-gauge wiring
kit with this amplifier.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.