Skip Navigation

Kicker 11ZX300.1

Mono subwoofer amplifier — 300 watts RMS x 1 at 2 ohms

2 Reviews

Item #: 2061ZX3001

This item is no longer available.

Original Price: $179.99

Shop all Car Amplifiers

Overview

Our take on the Kicker 11ZX300.1

This Kicker ZX300.1 mono subwoofer amplifier pumps your bass up loud and clear with up to 300 watts RMS of power. This sub amp runs reliably even when pushed hard, thanks to its heavy-duty internal components and the efficient cooling system it uses as it boosts your bass.

Big bass

This Kicker ZX300.1 mono subwoofer amplifier pumps your bass up loud and clear with up to 300 watts RMS of power. This sub amp runs reliably even when pushed hard, thanks to its heavy-duty internal components and the efficient cooling system it uses as it boosts your bass.

Works with almost any stereo

Kicker employs their Fail-Safe Integration Technology™ (FIT) to reject noise and stop any interference generated by your car's electronics, so you'll enjoy your music clean and pure. Speaker-level inputs make it simpler to hook this amp up to your factory system.

Bass controls

The steeply-sloped subsonic and low-pass filters keep the bass tight and up front in your car. A bass boost gives you even more kick, if you so desire. Be sure to get the optional wired remote level controller so you can crank up the level of fun from the front seat.

I installed this amp which is powering the Boston Acoustics G110PD. It sounds much better now in my '02 Rodeo.

Jeff S, Athens, TN

What's in the Box:

  • Mono amplifier
  • Owner's manual (English/ Spanish/ German/ French)

Product Highlights:

  • mono subwoofer amplifier
  • 150 watts RMS x 1 at 4 ohms (300 watts RMS x 1 at 2 ohms)
  • CEA-2006 compliant
  • low-pass filter (80 Hz, 24 dB/octave)
  • fixed subsonic filter (25 Hz, 24 dB/octave)
  • switchable bass boost (12 dB at 40 Hz)
  • Class AB amp technology
  • Fail-Safe Integration Technology eliminates noise from your vehicle's electrical system
  • preamp and speaker-level inputs (speaker-level input requires an optional adapter)
  • preamp outputs
  • optional wired ZXRC Remote Bass Control available
  • 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • fuse rating: 20A x 2
  • 13-1/2"W x 2-1/8"H x 9-5/8"D
  • warranty: 2 years (extends to 3 years when purchased with either a Kicker single amp wiring kit or a Kicker multi-amp kit)
  • Our 60-day money-back guarantee
Reviews

Kicker 11ZX300.1 Reviews

Average Customer Review:

2 Reviews

Great power when you need it

Written by: Jeff S from Athens, TN on June 11, 2013

Crutchfield Customer Review (What's this?)

I installed this amp which is powering the Boston Acoustics G110PD. It sounds much better now in my '02 Rodeo.

Pros: Brand name, price and reliability all at the same time. You can't go wrong with that.

Cons:

kicker mono block

Written by: Anonymous from enid ok. on April 7, 2013

  • "Coolness Factor"
  • Build Quality
  • Ease of Use
  • Sound Quality
  • Value

such a small amp perfect for two 12 inch kicker comps. so if you dont know where to start start here .

Pros: kicker name known all over

Cons:

Details

Hands-on research

What's in the box?

Download the Kicker 11ZX300.1 manual

  • Mono amplifier
  • Owner's manual (English/ Spanish/ German/ French)

Product Research

Controls
Connections

Controls

Gain: The rotary gain control is continuously variable from 125 mV to 5 V when the Input Sensitivity switch is set to Low and 250 mV to 10 V when the Input Sensitivity switch is set to High.

Crossover: The crossover can be set to low-pass or off (full-range). The crossover point is fixed at 80 Hz and the slope is 24dB per octave.

Auto Turn-on Switch: The amp offers three automatic turn-on modes; select from:

  • +12V: connect a wire from the remote turn-on lead from your source unit to the REM terminal on the amplifier; this is the preferred turn-on method
  • DC Offset: turns the amp on when a 6-volt DC offset is detected at the high-level speaker inputs when the source unit is turned on
  • Audio: detects the incoming audio signal from your source unit and automatically turns the amp on; will not work if the input gain control is not set properly

Bass Boost: The bass boost circuit provides a 12 dB boost at 40Hz. The bass boost can be turned off if you prefer.

ZXRC Remote Bass Control: The bass output level can be controlled remotely using an optional wired remote bass control (item number 20610ZXRC, sold separately).

Connections

Left Side of Amplifier:

  • +12V (power): set screw terminal
  • REM (remote turn-on): set screw terminal
  • GND (ground): set screw terminal
  • Fuses: two 20-amp ATO fuses

Right Side of Amplifier:

  • Speaker Outputs: one pair of set screw terminals
  • RCA Input: one pair of stereo RCA input jacks; also used for speaker level input (item number 20609ZiSL needed, sold separately)
  • RCA Output: one pair of stereo RCA output jacks

Amp Wiring Kit: Kicker recommends using a 8-gauge wiring kit with this amplifier.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Library