Skip Navigation

Kicker 11ZX750.1

Mono subwoofer amplifier — 750 watts RMS x 1 at 2 ohms

Item #: 2061ZX7501

This item is no longer available.

Original Price: $349.99

Shop all Car Amplifiers

Add to Cart

Kicker 11ZX750.1

Overview

Our take on the Kicker 11ZX750.1

This Kicker ZX750.1 mono subwoofer amplifier powers your bass with up to 750 watts RMS. This reliable amp remains cool even when pushed hard, due to its heavy-duty internal components and the efficient Class-D amplifier technology it uses to boost your bass.

Big bass

This Kicker ZX750.1 mono subwoofer amplifier powers your bass with up to 750 watts RMS. This reliable amp remains cool even when pushed hard, due to its heavy-duty internal components and the efficient Class-D amplifier technology it uses to boost your bass.

Works with almost any stereo

Kicker employs their Fail-Safe Integration Technology (FIT™) to reject noise and stop any interference generated by your car's electronics, so you'll enjoy your music clean and pure. Speaker-level inputs make it simpler to hook this amp up to your factory system.

Bass controls

You can tune for almost any enclosure and bass driver with the steeply-sloped subsonic and low-pass filters. A bass boost gives you even more kick, when you're in the mood. A wired remote level controller is included so you can crank up the fun from the front seat.

What's in the Box:

  • Mono subwoofer amplifier
  • ZXRC Wired remote control
  • ZXRC cable with RJ-14 plugs on both ends
  • Owner's manual (English/ Spanish/ German/ French)

Product Highlights:

  • mono subwoofer amplifier
  • 375 watts RMS x 1 at 4 ohms (750 watts RMS x 1 at 2 ohms)
  • CEA-2006 compliant
  • variable low-pass filter (50-200 Hz, 24 dB/octave)
  • fixed subsonic filter (25 Hz, 24 dB/octave)
  • variable bass boost (0-18 dB at 40 Hz)
  • Class D amp technology
  • Fail-Safe Integration Technology eliminates noise from your vehicle's electrical system
  • preamp and speaker-level inputs (speaker-level input requires an optional adapter)
  • preamp outputs
  • wired remote sub level control included
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • fuse rating: 40A x 2
  • 14-11/16"W x 2-1/8"H x 9-5/8"D
  • warranty: 2 years (extends to 3 years when purchased with either a Kicker single amp wiring kit or a Kicker multi-amp kit)
  • Our 60-day money-back guarantee
Reviews

Kicker 11ZX750.1 Reviews


Details

Hands-on research

What's in the box?

Download the Kicker 11ZX750.1 manual

  • Mono subwoofer amplifier
  • ZXRC Wired remote control
  • ZXRC cable with RJ-14 plugs on both ends
  • Owner's manual (English/ Spanish/ German/ French)

Product Research

Controls
Connections

Controls

Gain: The rotary gain control is continuously variable from 125 mV to 5 V when the Input Sensitivity switch is set to Low and 250 mV to 10 V when the Input Sensitivity switch is set to High.

Crossover: The crossover is always engaged (cannot be bypassed). The crossover point is continuously variable from 50 to 200 Hz and the slope is 24dB per octave.

Auto Turn-on Switch: The amp offers three automatic turn-on modes; select from:

  • +12V: connect a wire from the remote turn-on lead from your source unit to the REM terminal on the amplifier; this is the preferred turn-on method
  • DC Offset: turns the amp on when a 6-volt DC offset is detected at the high-level speaker inputs when the source unit is turned on
  • Audio: detects the incoming audio signal from your source unit and automatically turns the amp on; will not work if the input gain control is not set properly

Bass Boost: The bass boost circuit provides up to 18dB boost at 40Hz.

ZXRC Remote Bass Control: The bass output level can be controlled remotely using the included wired remote bass control.

Connections

Left Side of Amplifier:

  • +12V (power): set screw terminal
  • REM (remote turn-on): set screw terminal
  • GND (ground): set screw terminal
  • Fuses: two 40-amp ATO fuses

Right Side of Amplifier:

  • Speaker Outputs: one pair of set screw terminals
  • RCA Input: one pair of stereo RCA input jacks; also used for speaker level input (item number 20609ZiSL needed, sold separately)
  • RCA Output: one pair of stereo RCA output jacks

Amp Wiring Kit: Kicker recommends using a 4-gauge wiring kit with this amplifier.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Library