Watch a video review from one of our experts

Kicker 12CX600.1

Mono subwoofer amplifier — 600 watts RMS x 1 at 2 ohms

Item #: 2062CX6001

In Stock

22 Reviews | 5 questions - 16 answers

Your price: $249.99 Earn up to 250 Rewards points

Add to Cart Free Shipping Lifetime Tech Support

+ Add to wishlist + Email me alerts for this product

View all associated offers

Power for your bass

Leave it to Kicker to come up with this bantam heavyweight. The CX600.1 amplifier delivers up to 600 watts RMS to your subwoofer from a 7" x 8" chassis that'll fit almost anywhere. And they don't cut any corners building this amp, using oversized transistors, special transformers, and a heavy-duty heat sink to bring you awesome power that won't fade when you push your system hard.

Control over your bass

Kicker includes a low-pass filter to keep high frequencies away from your sub, a fixed subsonic filter that protects your sub from inaudible, power-devouring ultra-low frequencies, and a variable bass boost that allows you to add some kick to the mix. An optional wired remote bass level controller is available so you can crank the bass up or down from the front seat.

Vertical mounting

Includes hardware for vertical mounting

Hooks in almost anywhere in almost any position

Kicker uses their Fail-Safe Integration Technology (FIT™) to keep this amp's input free from noise or interference, so you'll get a clean signal from almost any system, even a factory radio. Rugged metal end panels provide even more shielding from radiated interference. The CX600.1 also comes with hardware that lets you mount it vertically, so it'll take up very little floor space and look ultra-cool.

.

Kicker CX600.1 amplifier

CX600.1 control panel

Product Highlights:

  • mono subwoofer amplifier
  • 300 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms)
  • CEA-2006 compliant
  • Class D amp technology
  • variable low-pass filter (50-200 Hz, 12 dB/octave)
  • fixed subsonic filter (25 Hz, 24 dB/octave)
  • variable bass boost (0-12 dB at 40 Hz)
  • frequency response: 25-200 Hz
  • preamp and speaker-level inputs (optional wire adapter required for speaker-level inputs)
  • balanced differential inputs and Fail-Safe Integration Technology eliminate noise from your vehicle's electrical system
  • preamp outputs for connection to another amp
  • optional remote bass level controller available
  • 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier
  • no onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line fuse between the distribution block and the amplifier is recommended
  • includes hardware for vertical mounting
  • 8-5/8"W x 2-3/8"H x 7-1/8"D
  • warranty: 2 years (extends to 3 years when purchased with either a Kicker single amp wiring kit or a Kicker multi-amp kit)
  • Our 60-day money-back guarantee

My system has plenty of power. Who needs an amp?

You might think you don't need an amp because you have a 400-watt system in your car, or because your new stereo puts out 50 watts a channel. But those are peak wattage ratings, which may boil down to 15 or 20 watts per channel, using the more realistic RMS rating. An amp sends your speakers the power they need to deliver your music with clarity and impact, whether you're using factory speakers or high-performance components. And low-frequency reproduction requires lots of power, so an amp is an absolute must if you're adding a sub to your system.

Hands-on research

What's in the box?

Download owner's manual

  • Mono subwoofer amplifier
  • 2 Vertical mounting brackets
  • Four 3/4" Self-tapping screws
  • 3mm Allen wrench
  • Owner's manual (English/ Spanish/ German/ French)
  • Power certification sheet

Product Research

Features
Connections

Features

Gain: The rotary gain control is continuously variable from 125 mV to 5 V when the Input Sensitivity switch is set to Low and 250 mV to 10 V when the Input Sensitivity switch is set to High.

Input Level Switch: Set the input level switch to Lo when using a preamp level input signal and Hi when using a speaker level input signal.

Crossover: The crossover is always engaged (cannot be bypassed). The crossover point is continuously variable from 50 to 200 Hz and the slope is 12 dB per octave.

Subsonic Filter: The subsonic filter is fixed at 25 Hz and 24 dB per octave.

Auto Turn-on: The amp offers two automatic turn-on modes:

  • +12V: connect a wire from the remote turn-on lead from your source unit to the REM terminal on the amplifier; this is the preferred turn-on method
  • DC Offset: turns the amp on when a 6-volt DC offset is detected at the high-level speaker inputs when the source unit is turned on

Bass Boost: The bass boost circuit is continuously variable from 0 to +12 dB and centered at 40 Hz.

CXRC Remote Bass Control: The bass output level can be controlled remotely using an optional wired remote bass control (item number 20612CXRC, sold separately).

Vertical Mounting: The amp can be mounted vertically using the included brackets. The vertical dimensions are approximately:

  • Width: 9"
  • Height: 7-1/4"
  • Depth: 2-3/8"

Signal to Noise Ratio: The S/N under CEA-2006 compliant conditions (1 watt output) is 75 dBA. The S/N at rated power is 95 dB.

Connections

Left Side of Amplifier:

  • +12V (power): set screw terminal; will accept bare wire up to 4-gauge
  • REM (remote turn-on): set screw terminal; will accept bare wire up to 8-gauge
  • GND (ground): set screw terminal; will accept bare wire up to 4-gauge
  • Speaker Outputs: terminal strip with two pair of subwoofer outputs; the two outputs are internally shorted together, making it easy to wire two subwoofers; accepts spade connectors up to 0.325" wide
Note: The Amplifier is not equipped with an internal fuse. An external 80-amp fuse (not included) must be installed on the power wire. If the system has only this amp and a wiring kit is used that includes a fuse with a value other than 80-amps, the original should be replaced with an 80-amp fuse.

Right Side of Amplifier:

  • RCA Input: one pair of stereo RCA input jacks; also used for speaker level input (item number 206KiSL needed, sold separately)
  • RCA Output: one pair of stereo RCA output jacks; line level output when using either preamp or speaker level inputs
  • Remote Bass: 3.5mm mini-jack for use with the optional CXRC wired remote bass level control

Amp Wiring Kit: Kicker recommends using a 4-gauge wiring kit with this amplifier.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Kicker 12CX600.1 Reviews

Average Customer Review:

22 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

(0)
(0)
(0)
(0)
(0)

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Big Power--Small Package

Written By J_tosti, Indiana on Wednesday, December 17, 2014

Crutchfield Customer Review (What's this?)

To be honest, I had some reservations regarding Kicker's CX line of amplifiers. However, after having experiences with two (2) of their models, I must say I am very impressed with the quality, design, and performance of this product. Regarding power: This amplifier is advertised as producing 600 watts x 1 at 2 ohms. Upon delivery, the final product quality certificate confirms that this power is achieved plus some. Regarding features: Nothing really special. You will find typical features such as gain, frequency, bass boost, and hi/lo pass; however, for the type of amplifier this is, I wouldn't expect much more. Amplifier adjustments are simple and directions are intuitive. Very nice amplifier at a nice price point.

Pros: Powerful, Efficient, Small Footprint, Option for remote bass control available.

Cons: None at this time.

Seems good

Written By Noah, Elko New Market, MN on Tuesday, December 09, 2014

Crutchfield Customer Review (What's this?)

Easily to install and seems to work pretty good

Pros: Compact and powerful

Cons: None

I love this amp

Written By tommytheblade, Denver, CO on Monday, October 20, 2014

this app is awesome I have it pushin a 1 12" Kicker comp R it is wild it sounds amazing I really think that it's pushing more than 600 watts I would highly recommend any kind of kicker amp to any of my friends or family

Pros: the pros of this app is at its compact holds a lot of power and I don't get hot easily and its just a good all around

Cons: honestly I don't have no cons I have no complaints about the dimensions: nothing this this technology is just superior

Tiny size with huge power!

Written By MavericksDad, Elk Grove ca on Monday, September 08, 2014

Crutchfield Customer Review (What's this?)

This amp was recommended by my Crutchfield technician, and I must say I was alittle skeptical that an amp rated at this output and at this cost could really be as good as advertised. Well let me say I am extremely happy with the clean, crisp lows this amp is providing my 2 12in JL W0's. The footprint is tiny and can be mounted dang near anywhere I wanted. Does not get that hot either! Overall bang for the buck?? 10/10

Pros: Plenty of wattage, small size, ease of adjustments

Cons: None

Kicker 12CX600.1

Written By Martin, Ga. on Saturday, August 30, 2014

Crutchfield Customer Review (What's this?)

Compact & powerful. Easy install.

Pros: Compact & $ wise

Cons: Bass controller should be included

Great Amp

Written By D, Framingham, Ma on Thursday, July 24, 2014

Crutchfield Customer Review (What's this?)

This amp brings out all the bass needed for both my 10" JL subs. The bass is so clean and clear. This amp has the option for me to install a volume knob. When i have people in the car I bring it down or just all the way down so it doesnt bother people. I love that. The amp itself is so small and I can fit it just about anywhere i like. I love it. Worth every penny.

Pros: Size, quality, clean bass

Cons: None

Compact

Written By Dewayne, Lebanon, IN on Wednesday, July 02, 2014

Crutchfield Customer Review (What's this?)

Very surprised of the size of the unit itself. I installed it in my nephews car and with the small footprint I was able to put it pretty much any place. Its got great power and easy to setup. Would recommend this item especially if you are limited on space like a single cab truck or lacking trunk space.

Pros: small, easy to setup, clean power

Cons: none so far

kicker amp

Written By Dustin, United States on Friday, May 23, 2014

Crutchfield Customer Review (What's this?)

Great paired with 2 comp s 10" enclosures under my z71 back seat.

Pros: Compact size

Cons: None

12CX600

Written By Dave y, Key west on Sunday, May 18, 2014

Crutchfield Customer Review (What's this?)

Provides plenty of power for my two JL 10's. Very clean bass. Mounts perfect under the rear seat in a 07 up tahoe.

Pros: Everything

Cons: Nothing

Plenty of power

Written By Dillon, La Verne, CA on Wednesday, May 14, 2014

Crutchfield Customer Review (What's this?)

This amp is powering a 10" Kicker CompRT, and it's just amazing. The sound is clean and distinct. the footprint is unbelievably small.

Pros: Clean sound Small footprint

Cons: none

Small size and great power

Written By jmd, bossier city, la on Monday, May 05, 2014

Crutchfield Customer Review (What's this?)

  • "Coolness Factor"
  • Build Quality
  • Ease of Use
  • Sound Quality
  • Value

This amp is great as far as size and power. I purchased it to install in my 2003 wrangler. This amp has brackets that allow you to install standing up on its side which is perfect because I selected the space inside the center console where the factory amp and sub lived prior to upgrade. The amp is pushing two SVC 4 ohm kicker subs that I ran in parallel for a 2 ohm load and the amp is perfectly suited. I ran 4 gauge wire for power and ground so the amp gets all the power it needs and did not get hot at all during the tuning process. The jeeps like mine that were equipped with factory sub and amp have a slotted hole where the sub fired out that also should help keep the amp cool.

Pros: Size is great, power is awesome, and the ability to mount standing on its side makes more install options possible. Not to mention the competitive pricing and kicker quality.

Cons: None yet

Great

Written By Dmills, Chesnee, sc on Sunday, May 04, 2014

Crutchfield Customer Review (What's this?)

Works as it says powers a kicker comp 12 very well

Pros: Good quality

Cons: None yet

Clean Power

Written By BlameTheBird, Destin, Florida on Friday, April 25, 2014

Crutchfield Customer Review (What's this?)

This is my first Class D amp. I am pushing two Kicker 10" DVC's, with them set to 1 ohm resistance and wired in serial to the amp. It is such an improvement from my last amp, which was rated at 850 Watts RMS. Well worth the price for this amp if you want to hear clean, powerful bass.

Pros: Lots of Power. Small Footprint. Easy to set up.

Cons: None that I have found.

very good affordable product great value

Written By bryanplez, Denver, CO on Tuesday, April 15, 2014

I got this amp to replace a blown jbl amp. It's powering two Boston G2 10s in a custom box. And gives all the power i need! Installed in a BMW 323I E46, absolutely pushes these high quality subs perfectly!! Great amp for the price. Easy to install,and also running a avh-x7500bt, and they compliment each other great!

Pros: Price,dependability,power, ease of install, i like the fact you do not need a LOC if you want to use the amp with a factory radio. The yellow line is a great value from Kicker!!!

Cons: Not many cons at all with this Amp after 3 months of being used. May have some complaints in the future. I will just have to wait and see.

GREAT PERFECT for what I needed

Written By Shadow Drifter, Pittston pa 18640 on Tuesday, March 11, 2014

Crutchfield Customer Review (What's this?)

Perfect working for what I needed

Pros: Small and really powerful HIGHLY recommend

Cons: None

Power Haus

Written By JethroS, Los Alamos, NM on Monday, March 10, 2014

Crutchfield Customer Review (What's this?)

Always ran Kicker subs, never tried their amplifiers. Gave it a shot, not a complaint! Looks good, smells good (well, ok, doesn't smell at all) and it sure seems to push my SoloBaric excellently.

Pros: Tiny footprint Remote Bass Knob Vertical mounts No frills design

Cons: None

Big boom for the buck

Written By ptk61, Skiatook, OK on Thursday, December 26, 2013

Crutchfield Customer Review (What's this?)

This was my first foray into installing a power/sub amp in a vehicle, so I'm writing this from the perspective of someone who felt his way through the install. To someone new to car amp installs I would offer this advice: buy the Kicker PK4 wiring kit to go with the amp if you don't know what size wire or what the amperage of the fuse should be. There are plenty of good vids on a Kicker amp install, please watch at least one comprehensive one before starting out on your install if you are new to this.

I bolted the amp to the passenger seat back in my '07 Corvette and ran the cables along the passenger door panel. The amp is connected to a Polk Audio DXi104 10" subwoofer and even at low power the amp will really move the speaker. It sounds great and provides the bottom end depth that the miserable 2 ohm factory mid-bass units in the doors lack (and which are nearly impossible to replace). Although I'm impressed, this is the first car sub amp I've ever owned so I have nothing to compare it to.

Pros: plenty of power, multiple mount options

Cons: The volume and adjustment knobs on the amp don't have a detent you can put a screwdriver in so you can adjust them easily. I don't care for the mash-down connectors for amp power/ground/speaker outs.

Kicker 12CX600.1

Written By Kevin L, Leonardtown, MD on Tuesday, October 08, 2013

Crutchfield Customer Review (What's this?)

Toyota XRunner - down firing custom taco box - Kicker 40CWD104 sub. Perfect amount of bass as requested. Very clean and strong. Drum and Bass, Top 40 style music.

Pros: Clean crisp sound. Small but powerful. Great price.

Kicker 12CX600.1

Written By Ivan, Bayamon ,P.R on Wednesday, September 11, 2013

Crutchfield Customer Review (What's this?)

Kicker never fails.

Pros: Small and easy to install

Cons: none

Kicker 12CX600.1

Written By Anonymous, Flagstaff Arizona on Sunday, August 11, 2013

Crutchfield Customer Review (What's this?)

Small and easy to install

wow effect

Written By Mike, raleigh, NC on Sunday, July 28, 2013

I bought this amp to replace my 700w peak output planet audio amp (which is a great amp as well) to push my 2013 rockford P2....and wow what a difference in sound and depth of bass in the 2 amps!!! I also have the pioneer AVH-2400BT which makes this all so much better ....by the way this is all in a 05 Ford F-150

Pros: A lot to come I'm sure

Cons: None so far

amazing amp

Written By scandebob, great bend KS on Tuesday, June 04, 2013

Crutchfield Customer Review (What's this?)

The kicker cx 600.1 amplifier is by far the best for the money and it puts out what it says it will. Great investment.

Product reviews from the Crutchfield Labs

Kicker's Yellow Series of amps, speakers and subs gives you the performance you expect from Kicker at a more affordable price. And this year's models are better than ever.

What are the Labs?

Get everything you’ll need to enjoy your new Kicker 12CX600.1

Bring the music from your amp to your speakers.
Patch cables take the music from your stereo to the amplifier. Most amp wiring kits don't include them.
Get a spare fuse now so you won't be listening to silence later.
Add a remote and control your amp from the driver's seat.
For multi-amp systems, you'll need a separate fuse holder.
Helps protect your car's charging system and improves power handling. Required power and ground wires not included with cap.
The right tools will make the installation easier.
Have your new amplifier put in by a qualified professional in your area.
Kicker CK4

Kicker CK4

Complete 4-gauge amplifier wiring kit — includes 2-channel patch cable and speaker wire

Item #: 206CK4

(1)

$149.99
Add to Cart
Kicker PK4

Kicker PK4

4-gauge amplifier power wiring kit

Item #: 206PK4

(1)

$129.99
Add to Cart
T-Spec 4PK Installation Kit

T-Spec 4PK Installation Kit

4-gauge amplifier wiring kit — includes speaker wire

Item #: 1204PK

(3)

$89.99
Add to Cart
Rockford Fosgate RFK4X

Rockford Fosgate RFK4X

Complete 4-gauge amplifier wiring kit
Includes patch cable and speaker wire

Item #: 575RFK4X

(12)

$159.99
Add to Cart
Rockford Fosgate RFK4

Rockford Fosgate RFK4

4-gauge amplifier power wiring kit

Item #: 575RFK4

(10)

$114.99
Add to Cart
EFX PA4BX Wiring Kit

EFX PA4BX Wiring Kit

4-gauge amplifier wiring kit — includes 2-channel patch cable

Item #: 142PA4BX

(6)

$79.99
Add to Cart
T-Spec V10-RAK4

T-Spec V10-RAK4

4-gauge amplifier wiring kit — includes 2-channel patch cable

Item #: 120V10RAK4

(1)

$99.99
Add to Cart
Lightning Audio LA-4i

Lightning Audio LA-4i

4-gauge amplifier wiring kit — includes 2-channel patch cable

Item #: 495LA4I

(10)

$69.99
Add to Cart
T-Spec 12-gauge Speaker Wire

T-Spec 12-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW12WB1

(30)

T-Spec 16-gauge Speaker Wire

T-Spec 16-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW16WB1

(13)

Kicker KISL

Kicker KISL

2-channel speaker wire adapter (bare-wire connector to RCAs)

Item #: 206KISL

(16)

$12.99
Add to Cart
JL Audio XD-CLRAIC2-SW

JL Audio XD-CLRAIC2-SW

2-channel speaker output converter (bare speaker wires to male RCAs)

Item #: 136XDCLR2S

(12)

T-Spec 2-Channel RCA Patch Cables

T-Spec 2-Channel RCA Patch Cables

Available in 7 different lengths (20-foot)

Item #: 120RCA202

(27)

$20.99
Add to Cart
EFX 17-foot RCA Patch Cable

EFX 17-foot RCA Patch Cable

Item #: 142A17C

(55)

$7.99
After $2.00 Savings Add to Cart
EFX 2-Channel RCA Patch Cables

EFX 2-Channel RCA Patch Cables

Reference Series Multi-Core RCA patch cables — available in 5 different lengths (12-foot)

Item #: 142RR12

$19.95
Add to Cart
EFX 2-Channel RCA Patch Cables

EFX 2-Channel RCA Patch Cables

Core Series Twisted RCA patch cables — available in 5 different lengths (12-foot)

Item #: 142RCT12B

$9.95
Add to Cart
EFX 2-Channel RCA Patch Cables

EFX 2-Channel RCA Patch Cables

Elite Series Braided Multi-Core RCA patch cables — available in 5 different lengths (25-foot)

Item #: 142RE25

$99.95
Add to Cart
Rockford Fosgate RFF80 MAXI Fuse

Rockford Fosgate RFF80 MAXI Fuse

Pair of 80-amp platinum-plated wafer fuses

Item #: 575RFFM80

(1)

Kicker 12CXRC Remote Bass Control

Kicker 12CXRC Remote Bass Control

Dash-mount wired remote for Kicker CX-Series amplifiers

Item #: 20612CXRC

(16)

$24.99
Add to Cart
Rockford Fosgate RFFAGU Fuse Holder

Rockford Fosgate RFFAGU Fuse Holder

Platinum-plated AGU fuse holder
Fits 4- or 8-gauge cable

Item #: 575RFFAGU

(25)

$10.99
Add to Cart
EFX CFHG4 Fuse Holder

EFX CFHG4 Fuse Holder

In-line AGU fuse holder accepts 4- to 8-gauge wire

Item #: 142CFHG4

T-Spec Capacitor

T-Spec Capacitor

1.5-farad capacitor with red LCD meter

Item #: 12015DDC

(11)

$79.99
Add to Cart
S&G Wire Cutter/Stripper Tool

S&G Wire Cutter/Stripper Tool

Cuts and strips 12- to 22-gauge wire

Item #: 18119100

(17)

$19.99
Add to Cart
Pro.Fit Wire Worm

Pro.Fit Wire Worm

Installation tool helps route wiring through tight spaces

Item #: 042DM4533

(34)

$12.99
Add to Cart
Metra Crimp Tool and Connectors

Metra Crimp Tool and Connectors

Package contains crimp tool and over 150 pieces

Item #: 120CRIMPKT

(15)

$19.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6NGL

(54)

$24.99
Add to Cart
S&G Tool Aid 87650

S&G Tool Aid 87650

Door Trim and Panel Removal Tool

Item #: 18187650

(71)

Skewdriver Pro SPK4042

Skewdriver Pro SPK4042

Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)

Item #: 180SPK4042

(8)

$49.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6LNGL

(3)

$29.99
Add to Cart
Install Bay IB35400

Install Bay IB35400

Premium door panel and trim tool

Item #: 12035400

$15.99
Add to Cart
Install Bay 3320

Install Bay 3320

Auto-ranging digital multimeter

Item #: 1203320

$39.99
Add to Cart
DEI Heat Shrink Tubing

DEI Heat Shrink Tubing

Black 4-foot length (Assortment)

Item #: 696010839

(8)

$24.99
Add to Cart
InstallCard: Amp or Equalizer

InstallCard: Amp or Equalizer

Prepaid professional amplifier or EQ installation

Item #: 597421003

(18)

$79.99
Add to Cart
Autosound 2000 Disc One

Autosound 2000 Disc One

Low Frequency Test CD (Disc One)

Item #: 503CD101

(1)

$19.99
Add to Cart

Questions & Answers Ask the community. Share your knowledge.

5 questions already asked

This amp is not equipped with an internal fuse. An 80A inline fuse is recommended. By the way, this thing powers my 1200 watt kicker sub fantastically! What a great combo. [ DILLON  Sep 29, 2014 ]
Some where along your run the ground wire or power wire are grounding the unit out improperly. you might also want to check the fuses to see if there blown. or if the gound wire is not pushed in all the way and is touch the power wire its sending the unit into protection mode. [ SEAN  Sep 23, 2014 ]
I can't give you anything but guesses, but if the protection circuit is on and there is no power indicator light the first thing to check is that you have correct voltage to the amp. This amp requires 4 gauge wire run from the battery with an 80-amp fuse in line on the positive lead within 18 inches from the battery. So that lead runs from the battery positive terminal and the negative grounded to the frame and both run through the firewall to wherever you installed the amp inside the car. I read posts of other people with the same problem that changed out the amp but that did not help them as the issue persisted. If it's hooked up correctly then the next thing to do is take it to a car audio installer. [ P T  Sep 21, 2014 ]
Gain [ MICHAEL P  Aug 10, 2014 ]
Controls the BOOST [ RICKY A  Aug 09, 2014 ]
Gain [ SAMUEL  Aug 09, 2014 ]
Yes it controls the bass boost. Bass is either too low or not enough without it. I suggest getting it as the bass needs adjusted all the time depending on the song and type of music. [ TRAVIS J  Aug 09, 2014 ]
Yes. The amp has two pairs of speaker outputs. You can bridge the amp and drive one 2ohm sub, or you can use all of the outputs and drive 2 4ohm subs. [ P T  May 14, 2014 ]
Yes [ ALEXANDER  May 13, 2014 ]
Yes. That's exactly what I have running mine. [ AARON  May 13, 2014 ]
Depending on ohm, and output I would say probably yes [ MICHAEL P  May 13, 2014 ]
Yes, I have two 12" subs hooked up currently [ JUSTIN  May 12, 2014 ]
What kind of subs? I have two kicker comp d 12" hooked up and they are pretty loud. [ JACOB  May 12, 2014 ]
Yes... No problem. I have the amp running 2 10" Kickers & they hit great!! [ THOMAS  May 12, 2014 ]
It depends on the watts of the subs, if each sub is 300 watts you should be ok, this amp is rated for 600 watts peak. Personally I use this amp to power one 12in apline type s which has 500 watts so I'm never peaking the amp. [ SCOTT  May 12, 2014 ]
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Krissy  Jan 21, 2014 ]  Staff