Watch a video review from one of our experts

Kicker 12CX600.5

5-channel car amplifier — 40 watts RMS x 4 at 4 ohms + 300 watts RMS x 1 at 2 ohms

Item #: 2062CX6005

In Stock

Be the first to write a review | 1 question - 1 answer

Your price: $399.99 Earn up to 400 Rewards points

Add to Cart Free Shipping Lifetime Tech Support

+ Add to wishlist + Email me alerts for this product

View all associated offers

1.888.955.6000

Email

Chat

We don't check this item for fit or compatibility.

Power for your complete system

Leave it to Kicker to come up with a smart way to power up your entire system with one compact amp that'll fit in some tight places. The CX600.5 5-channel amplifier sends 40 watts RMS to each of your front and rear speakers, plus up to 300 watts RMS to your subwoofer. And they don't cut any corners building this amp, using oversized transistors, special transformers, and a heavy-duty heat sink to bring you reliable power that won't fade when you push your system hard.

Plenty of control

High- and low-pass filters sculpt the sound so your speakers and subs can sound their best, while a variable bass boost allows you to add some strong kick to the mix. A fixed subsonic filter protects your sub from inaudible, power-devouring frequencies, and you can use an optional wired remote bass level controller to crank the bass up or down from the front seat. Got some nice component speakers up front? You can bridge the front and rear channels into 2-channel mode to drive them with 150 watts each, and still have 300 watts RMS left for your sub.

Vertical mounting

Includes hardware for vertical mounting

Hooks in almost anywhere in almost any position

Kicker uses their Fail-Safe Integration Technology (FIT™) to keep this amp's input free from noise or interference, so you'll get a clean signal from almost any system, even a factory radio. Rugged metal end panels provide even more shielding from radiated interference. The CX600.5 also comes with hardware that lets you you mount it vertically, so you can put it in a location that takes up very little floor space and looks ultra-cool.

Kicker CX600.5 amplifier

CX600.5 control panel

Product Highlights:

  • 5-channel car amplifier
  • 40 watts RMS x 4 + 150 watts RMS x 1 at 4 ohms
  • 75 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms
  • 150 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms
  • CEA-2006 compliant
  • Class AB and D amp technology
  • variable high-pass filters (50-200 Hz, 12 dB/octave) on front and rear channels
  • variable low-pass filter (50-200 Hz, 12 dB/octave) on subwoofer channel
  • variable bass boost (0-12 dB at 40 Hz) on sub channel
  • fixed subsonic filter (25 Hz, 24 dB/octave) on sub channel
  • frequency response: 10-20K Hz on front and rear channels; 25-200 Hz on sub channel
  • preamp and speaker-level inputs (optional wire adapter required for speaker-level inputs)
  • balanced differential inputs and Fail-Safe Integration Technology eliminate noise from your vehicle's electrical system
  • optional remote bass level controller available
  • 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier
  • no onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line fuse between the distribution block and the amplifier is recommended
  • includes hardware for vertical mounting
  • 14-3/4"W x 2-3/8"H x 7-1/8"D
  • warranty: 2 years (extends to 3 years when purchased with either a Kicker single amp wiring kit or a Kicker multi-amp kit)
  • Our 60-day money-back guarantee

My system has plenty of power. Who needs an amp?

You might think you don't need an amp because you have a 400-watt system in your car, or because your new stereo puts out 50 watts a channel. But those are peak wattage ratings, which may boil down to 15 or 20 watts per channel, using the more realistic RMS rating. An amp sends your speakers the power they need to deliver your music with clarity and impact, whether you're using factory speakers or high-performance components. And low-frequency reproduction requires lots of power, so an amp is an absolute must if you're adding a sub to your system.

Hands-on research

What's in the box?

Download owner's manual

  • 5-Channel amplifier
  • 2 Vertical mounting brackets
  • Four 3/4" Self-tapping screws
  • 3mm Allen wrench
  • Owner's manual (English/ Spanish/ German/ French)
  • Power certification sheet

Product Research

Features
Controls
Connections

Features

CEA 2006 Compliant: The Kicker CX600.5's power ratings are measured according to the criteria approved by the Consumer Electronics Association (CEA). These standards allow you to accurately compare the rated power output of all CEA 2006-compliant amplifiers, even from different brands. Manufacturers who adhere to the standards can display the CEA 2006 logo on their products and packaging.

Kicker Livin' Loud Certified Power: The amplifier comes with a certificate that indicates the total maximum wattage of the particular amplifier, along with the model number, serial number, and whether the amplifier passed the total harmonic distortion, signal-to-noise ratio, and protection circuit tests.

5-Channel Design: The CX600.5 is made up of three sections, Amp1 (2-channel full range front), Amp2 (2-channel full range rear), and a subwoofer amp (1-channel). The front and rear amps are independently bridgeable, meaning the CX600.5 can be used as a 5-channel, 4-channel, or 3-channel amp. The minimum impedance for each section is 2Ω, 4Ω when bridged.

Power Output:

  • Amp1 and Amp2 (CEA 2006 Compliant): 40 watts x 4 RMS into 4Ω (20-20,000 Hz, <1% THD+N, 14.4 volts)
  • Subwoofer Channel (CEA 2006 Compliant): 150 watts x 1 RMS (25-200 Hz, <1% THD+N, 14.4 volts)
  • Amp1 and Amp2 (2Ω): 75 watts x 4 RMS (20-20,000 Hz, <1% THD+N, 14.4 volts)
  • Amp1 and Amp2 Bridged: 150 watts x 2 RMS into 4Ω (20-20,000 Hz, <1% THD+N, 14.4 volts)
  • Subwoofer Channel (2Ω): 300 watts x 1 RMS into 2Ω (25-200 Hz, <1.5% THD+N, 14.4 volts)

Auto Turn-on: The amp offers two automatic turn-on modes:

  • +12V: connect a wire from the remote turn-on lead from your source unit to the REM terminal on the amplifier; this is the preferred turn-on method
  • DC Offset: turns the amp on when a 6-volt DC offset is detected at the high-level speaker inputs when the source unit is turned on

Vertical Mounting: The amp can be mounted vertically using the included brackets. The vertical dimensions are approximately:

  • Width: 14-3/4"
  • Height: 7-1/4"
  • Depth: 2-3/8"

Signal to Noise Ratio: The S/N under CEA-2006 compliant conditions (1 watt output) is 75 dBA. The S/N at rated power is 95 dB for the full range amps and 90 dB for the subwoofer amp.

Subsonic Filter: The subsonic filter in the subwoofer amp is fixed at 25 Hz and 24 dB per octave.

Controls

Input Level Switch: Set the input level switch to Lo when using preamp level input signals and Hi when using speaker level input signals.

Fader: When your source unit has discrete front and rear outputs, set the fader switch to on. Turn the fader switch off to send a single stereo input to both the front and rear amps.

Front (Amp1):

  • Gain: rotary gain control; continuously variable from 125 mV to 5 V when the Input Level switch is set to Low and 250 mV to 10 V when the Input Level switch is set to High
  • Crossover: high-pass crossover; continuously variable from 50 to 200 Hz (can also be turned off, so the output signal is full range); the slope is 12 dB per octave

Rear (Amp2):

  • Gain: rotary gain control; continuously variable from 125 mV to 5 V when the Input Level switch is set to Low and 250 mV to 10 V when the Input Level switch is set to High
  • Crossover: high-pass crossover; continuously variable from 50 to 200 Hz (can also be turned off, so the output signal is full range); the slope is 12 dB per octave

Subwoofer:

  • Gain: rotary gain control; continuously variable from 125 mV to 5 V when the Input Level switch is set to Low and 250 mV to 10 V when the Input Level switch is set to High
  • Crossover: low-pass crossover; continuously variable from 50 to 200 Hz (always engaged/cannot be bypassed); the slope is 24 dB per octave
  • Bass Boost: continuously variable from 0 to +12 dB; centered at 40 Hz
  • CXRC Remote Bass Control: the sub output level can be controlled remotely using an optional wired remote bass control (item number 20612CXRC, sold separately)
  • Sub Input: when your source unit has a dedicated subwoofer output, set the sub input switch to Sub; set to Amp2 to get the signal from the rear amp

Connections

Left Side of Amplifier:

  • +12V (power): set screw terminal; will accept bare wire up to 4-gauge
  • REM (remote turn-on): set screw terminal; will accept bare wire up to 8-gauge
  • GND (ground): set screw terminal; will accept bare wire up to 4-gauge
  • Speaker Outputs: terminal strip with five pair of outputs; accepts spade connectors up to 0.325" wide
Note: The Amplifier is not equipped with an internal fuse. An external 80-amp fuse (not included) must be installed on the power wire. If the system has only this amp and a wiring kit is used that includes a fuse with a value other than 80-amps, the original should be replaced with an 80-amp fuse.

Right Side of Amplifier:

  • RCA Inputs: three pair of stereo RCA inputs (Amp1, Amp2, and Sub); also used for speaker level input (up to three of item number 206KiSL needed, sold separately)
  • Remote Bass: 3.5mm mini-jack for use with the optional CXRC wired remote bass level control

Amp Wiring Kit: Kicker recommends using a 4-gauge wiring kit with this amplifier.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Be the first to review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Product reviews from the Crutchfield Labs

Kicker's Yellow Series of amps, speakers and subs gives you the performance you expect from Kicker at a more affordable price. And this year's models are better than ever.

What are the Labs?

Get everything you’ll need to enjoy your new Kicker 12CX600.5

Bring the music from your amp to your speakers.
Patch cables take the music from your stereo to the amplifier. Most amp wiring kits don't include them.
Add a remote and control your amp from the driver's seat.
Get a spare fuse now so you won't be listening to silence later.
For multi-amp systems, you'll need a separate fuse holder.
Helps protect your car's charging system and improves power handling. Required power and ground wires not included with cap.
The right tools will make the installation easier.
Have your new amplifier put in by a qualified professional in your area.
Kicker CK4

Kicker CK4

Complete 4-gauge amplifier wiring kit — includes 2-channel patch cable and speaker wire

Item #: 206CK4

$149.99
Add to Cart
Kicker PK4

Kicker PK4

4-gauge amplifier power wiring kit

Item #: 206PK4

$129.99
Add to Cart
Rockford Fosgate RFK4X

Rockford Fosgate RFK4X

Complete 4-gauge amplifier wiring kit
Includes patch cable and speaker wire

Item #: 575RFK4X

(12)

$159.99
Add to Cart
T-Spec 4PK Installation Kit

T-Spec 4PK Installation Kit

4-gauge amplifier wiring kit — includes speaker wire

Item #: 1204PK

(3)

$89.99
Add to Cart
Rockford Fosgate RFK4

Rockford Fosgate RFK4

4-gauge amplifier power wiring kit

Item #: 575RFK4

(10)

$114.99
Add to Cart
EFX PA4BX Wiring Kit

EFX PA4BX Wiring Kit

4-gauge amplifier wiring kit — includes 2-channel patch cable

Item #: 142PA4BX

(5)

$79.99
Add to Cart
T-Spec V10-RAK4

T-Spec V10-RAK4

4-gauge amplifier wiring kit — includes 2-channel patch cable

Item #: 120V10RAK4

(1)

$99.99
Add to Cart
Lightning Audio LA-4i

Lightning Audio LA-4i

4-gauge amplifier wiring kit — includes 2-channel patch cable

Item #: 495LA4I

(7)

$69.99
Add to Cart
T-Spec 12-gauge Speaker Wire

T-Spec 12-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW12WB1

(30)

T-Spec 16-gauge Speaker Wire

T-Spec 16-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW16WB1

(13)

Stinger PRO Series Speaker Wire

Stinger PRO Series Speaker Wire

Priced per foot (14 Gauge)

Item #: 541SPW514B

(51)

$0.65
Add to Cart
Kicker KISL

Kicker KISL

2-channel speaker wire adapter (bare-wire connector to RCAs)

Item #: 206KISL

(14)

$12.99
Add to Cart
JL Audio XD-CLRAIC2-SW

JL Audio XD-CLRAIC2-SW

2-channel speaker output converter (bare speaker wires to male RCAs)

Item #: 136XDCLR2S

(12)

T-Spec 2-Channel RCA Patch Cables

T-Spec 2-Channel RCA Patch Cables

Available in 7 different lengths (20-foot)

Item #: 120RCA202

(27)

$20.99
Add to Cart
T-Spec 4-Channel RCA Patch Cable

T-Spec 4-Channel RCA Patch Cable

17-foot length

Item #: 120RCA174

(8)

$29.99
Add to Cart
EFX 17-foot RCA Patch Cable

EFX 17-foot RCA Patch Cable

Item #: 142A17C

(55)

$7.99
After $2.00 Savings Add to Cart
Kicker 12CXRC Remote Bass Control

Kicker 12CXRC Remote Bass Control

Dash-mount wired remote for Kicker CX-Series amplifiers

Item #: 20612CXRC

(16)

$24.99
Add to Cart
Rockford Fosgate RFF80 MAXI Fuse

Rockford Fosgate RFF80 MAXI Fuse

Pair of 80-amp platinum-plated wafer fuses

Item #: 575RFFM80

(1)

Rockford Fosgate RFFAGU Fuse Holder

Rockford Fosgate RFFAGU Fuse Holder

Platinum-plated AGU fuse holder
Fits 4- or 8-gauge cable

Item #: 575RFFAGU

(25)

$10.99
Add to Cart
EFX CFHG4 Fuse Holder

EFX CFHG4 Fuse Holder

In-line AGU fuse holder accepts 4- to 8-gauge wire

Item #: 142CFHG4

T-Spec Capacitor

T-Spec Capacitor

1.5-farad capacitor with red LCD meter

Item #: 12015DDC

(11)

$79.99
Add to Cart
S&G Wire Cutter/Stripper Tool

S&G Wire Cutter/Stripper Tool

Cuts and strips 12- to 22-gauge wire

Item #: 18119100

(15)

$19.99
Add to Cart
Pro.Fit Wire Worm

Pro.Fit Wire Worm

Installation tool helps route wiring through tight spaces

Item #: 042DM4533

(33)

$12.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6NGL

(52)

$24.99
Add to Cart
S&G Tool Aid 87650

S&G Tool Aid 87650

Door Trim and Panel Removal Tool

Item #: 18187650

(69)

Pro.Fit Trim Panel Tool

Pro.Fit Trim Panel Tool

Remove your vehicle's trim panels without damage

Item #: 042DM4022

(87)

Skewdriver Pro SPK4042

Skewdriver Pro SPK4042

Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)

Item #: 180SPK4042

(8)

$49.99
Add to Cart
Spec Tools SQR-200a Squeeze Wrench

Spec Tools SQR-200a Squeeze Wrench

Narrow space ratchet kit with 18 sockets

Item #: 180SQR200A

(1)

$49.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6LNGL

(2)

$29.99
Add to Cart
DEI Heat Shrink Tubing

DEI Heat Shrink Tubing

Black 4-foot length (Assortment)

Item #: 696010839

(7)

$24.99
Add to Cart
InstallCard: Amp or Equalizer

InstallCard: Amp or Equalizer

Prepaid professional amplifier or EQ installation

Item #: 597421003

(18)

$79.99
Add to Cart
Autosound 2000 Disc One

Autosound 2000 Disc One

Low Frequency Test CD (Disc One)

Item #: 503CD101

(1)

$19.99
Add to Cart
Autosound 2000 Disc Five

Autosound 2000 Disc Five

System Demonstration — Test CD

Item #: 503CD105

Questions & Answers Ask the community. Share your knowledge.

1 question already asked

Thanks for your question. For information on selecting the size wire, I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences and help you make the best choice for your system. [ Krissy  Jan 26, 2014 ]  Staff

Searches related to the Kicker 12CX600.5 5-channel car amplifier — 40 watts RMS x 4 at 4 ohms + 300 watts RMS x 1 at 2 ohms