About the Kicker 41DSC44
Here's the Kicker
Here's the Kicker
As if Kicker wasn't already stiff competition for any affordable car speaker, their DS-Series speakers once again raise the bar. In addition to providing excellent sound, these Kickers offer a thin profile that allows them to fit in more vehicles.
Solid sound
The 41DSC44 4" speakers will give you clarity like you've never had with your factory speakers. The 2-way design recreates a dynamic sound, dedicating the highs to the PEI domed tweeters while sending the midrange and lows to the 4" polypropylene woofer. The 41DSC44's highly sensitive design conjures hefty volume even from low-powered factory radios, so you can crank your tunes and keep 'em blasting the whole ride. Grilles included.
Highlights:
- 2-way car speakers (pair)
- 4" polypropylene woofer with ribbed polyester foam surround
- 1/2" PEI domed tweeter
- power range: 2-30 watts RMS (120 watts peak power)
- frequency range: 60-20,000 Hz
- sensitivity: 88 dB
- top-mount depth: 1-13/16"
- impedance: 4 ohms
- grilles included
- warranty: 1 year
- MFR # 41DSC44
What's in the box:
- Two 4" Coaxial speakers
- 2 Grilles
- Two 11" lengths of speaker wire (tinned wire on one end and 0.205" + 0.110" female quick slides on the other)
- 4 Red plastic butt connectors
- Eight 1-1/8" Self-tapping screws
- 8 Speed clips
- Owner's manual (English/ Spanish/ German/ French)
Featured video:
Customer reviews for Kicker 41DSC44
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kicker 41DSC44
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | 1/2" Balanced Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | PEI | |
Woofer Composition | Polypropylene | |
Woofer Surround | Polyester Foam | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 88 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 60 - 20k Hz | |
Minimum RMS Wattage | 2 | |
Maximum RMS Wattage | 30 | |
Peak Power Handling (Watts) | 120 | |
Top-mount Depth (Inches) | 1 13/16 | |
Bottom-mount Depth (Inches) | 2 1/16 | |
Cutout Diameter or Length (inches) | 3 3/4 | |
Mounting Height (Inches) | 0.232 | |
Frame Width | 4.039 | |
Frame Length | 4.039 |
Product Research
Features
Polypropylene Woofer Cones: The Kicker DS-series speakers feature durable polypropylene woofer cones for their rigidity and light weight. Polypropylene is also resistant to moisture and high temperature extremes found in automotive applications.
Ribbed Polyester Foam Surrounds: The ribbed polyester foam surrounds allow extended cone excursion for additional bass output and higher SPL.
1/2" PEI Balanced-dome Tweeters: The 1/2" PEI balanced-dome tweeters provide a smooth high frequency response with quick, detailed and spatially-correct imaging. PEI is an acronym for polyetherimide. The tweeters have strong neodymium magnets for higher power handling.
4/2 Hole Compatibility: Most 4" factory speakers use four mounting screws, however, in some vehicles, only two are used. The DSC4's mounting tabs can be removed, allowing installation in 4-hole or 2-hole applications. Care should be taken handling the speaker after any tabs are removed because the broken edges may be sharp. Please check the Find What Fits Your Car application to confirm fit in your vehicle.
The Kicker 41DSC44 replaces these items
Kicker DS40
- Polypropylene woofer with ribbed polyfoam surround
- 1/2" PEI balanced-dome tweeter
- 6-25 watts RMS power range
Loading...
Loading accessories...
Customer Q&A
2 questions already asked
Loading...
Loading articles...
Easy install with supplied adapters for mounting and wiring. Look good. I needed something small but with good sound and found everything I was looking for in these speakers.
Brian B. from Michigan