About the Kicker 41KSS654
The component sound
The component sound
Kicker's 41KSS654 component system features two quality 6-1/2" woofers, two powerful tweeters and two external crossovers. The highly sensitive design of these speakers conjures hefty volume, even from low-powered factory radios. And with efficient crossovers dialing in the division of low and high frequencies to designated speakers, this system will reveal nuances in your music you may have never heard.
You'll gain the satisfying impact of full midbass and midrange sound from the 6-1/2" polypropylene woofer and its powerful magnet. The silk dome tweeter will deliver all those subtle vocal and instrumental details, adding musical dimension that factory speakers just can't manage. The crossover network features 3 tweeter settings so you can attenuate the highs to match the woofer's output.
Versatile structure
This 41KSS654 system is one of the most installation-friendly Kicker systems yet. These low-profile woofers woofers are well under 2" deep, making them a match for almost any car. Kicker also gives you the option of screwing the tweeter on in place of the woofer's removable phase plug, giving you a coaxial speaker that benefits from the cleaner sound of using external crossovers.
Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.
Highlights:
- component speaker system includes 2 woofers, 2 tweeters, and 2 crossovers
- 6-1/2" polypropylene woofer cone with rubber surround
- 1" silk dome tweeter
- power range: 2-125 watts RMS (250 watts peak power)
- frequency range: 35-21,000 Hz
- sensitivity: 90 dB
- top-mount depth: 1-13/16"
- impedance: 4 ohms
- grilles included
- warranty: 1 year
- MFR # 41KSS654
What's in the box:
Kicker 41KSS654 owner's manual
- 2 Woofers
- 2 Phase plugs (installed)
- 2 Woofer grilles
- 2 Grille mounting rings
- Two 1" Tweeters (each with 6" Wire attached)
- 2 Tweeter mounting posts
- 2 Tweeter backs
- 2 Crossovers
- 2 Surface mount tweeter housings
- 2 Flush mount rings (tweeter)
- 2 Front angle rings (tweeter)
- 2 Back angle rings (tweeter)
- 2 Short mounting nuts (tweeter)
- 2 Long mounting nuts (tweeter)
- Two 10' Lengths of woofer speaker wire (tinned wire on one end and 0.205" + 0.110" female quick slides on the other)
- Two 10' Lengths of speaker wire (tinned wire on both ends)
- Two 70" Lengths of tweeter speaker wire (tinned wire on one end/one 0.110" male and one 0.110" female quick slide on the other)
- Two M4x8mm Machine screws
- Twelve 1-1/8" Self-tapping screws
- Four 5/8" Self-tapping flat head screws
- 12 Speed clips
- 4 Butt connectors
- Two 3-1/2" Zip ties
- 2 Pieces of grille putty
- Owner's manual (English/ Spanish/ German/ French)
Customer reviews for Kicker 41KSS654
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kicker 41KSS654
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | 1" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Silk | |
Woofer Composition | Polypropylene | |
Woofer Surround | Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 90 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 35 - 21k Hz | |
Minimum RMS Wattage | 2 | |
Maximum RMS Wattage | 125 | |
Peak Power Handling (Watts) | 250 | |
Top-mount Depth (Inches) | 1 13/16 | |
Bottom-mount Depth (Inches) | 2 3/16 | |
Cutout Diameter or Length (inches) | 4 7/8 | |
Mounting Height (Inches) | 0.513 | |
Frame Width | 6.247 | |
Frame Length | 6.247 |
Product Research
Features
Woofer Cones: The Kicker KS-series speakers feature durable Polypropylene woofer cones, resistant to the moisture and temperature extremes found in automotive applications.
Woofer Mounting: The woofer baskets have multiple mounting holes and are designed to fit standard 3-hole 6-1/2" applications, Ford's 4-hole 6-1/2" applications, and a standard 4-hole 6-3/4" application. (When mounting in a 6-3/4" application, a speaker baffle must be used to seal the inner ring of screw holes.)
Tweeter Mounting Options: The tweeters come with brackets to allow multiple mounting configurations; flush-mounted, angle-mounted, and surface-mounted:
Flush | Angle | Surface | |
---|---|---|---|
Mounting Height | 0.30" | 0.616" | 1.165" |
Mounting Depth | 0.65" | 0.5" | screw depth |
Frame Diameter | 2.317" | 2.335" | 1.914" |
Cutout Diameter | 1.753" | 1.765" | N/A |
Coaxial Tweeter Mount: In addition to standard tweeter mounting options, the included tweeter mounting post lets you mount the tweeter directly to the center of the woofer, giving you a standard coaxial speaker. When the tweeter is attached to the woofer the mounting height increases to 0.838" (top mount) and the tweeter protrusion increases to 0.472" (bottom mount).
Crossovers: The component system includes passive 2-way crossover networks for a seamless transition between the woofers and tweeters. The slope is 12dB per octave (both high pass and low pass) and the crossover point is 4000 Hz. A switch on each crossover allows you to attenuate the tweeter output; 0 dB, -4.5 dB, or -9 dB. The crossover has screw terminals that will accept bare wire or spade terminals up to 0.3" wide. The crossovers' dimensions are:
- Length: 5.58"
- Width: 2.85"
- Height: 1.27"
Loading...
Loading accessories...
Customer Q&A
2 questions already asked
Loading...
Loading articles...
Chose these to pair with Kicker 40CS654 in roll bar and Sony MEX-XB100BT head unit. Sound amazing compared to factory Alpine upgrade. Would highly recommend.
AF from Montana