About the Kicker 43DC122
Two Comp 12" subs
Two Comp 12" subs
Kicker's 43DC122 loaded enclosure puts the punch of a pair of thumping Comp 12" subs behind your music. This rugged ported box provides a reliable bass anchor for your sound system, no matter what kind of tunes you enjoy.
Kicker designed this side port to enhance bass response without adding noise.
Seriously sturdy construction
Each Comp 12" sub features a stiff injection-molded polypropylene cone with a double-stitched ribbed foam surround for deep excursion. Kicker's back-braced cone design keeps each woofer rigid and stable during those hard hits, while the perimeter venting system helps cool the sub's internal parts during demanding performances. A strong steel basket provides a stable foundation that won't flex during hard use.
Heavy-duty enclosure
Sturdy 3/4" medium-density fiberboard ensures long-lasting performance from the enclosure, and the generous side port provides more boom for your buck. You'll get hassle-free connection to your amp with the single set of speaker terminals, while the 2-ohm overall impedance draws maximum power from your mono amplifier.
Product highlights:
- ported enclosure with two 12" Comp subwoofers
- 3/4" medium-density fiberboard construction covered with carpet
- 2-ohm total impedance
- power handling: 100-300 watts RMS (600 watts peak power)
- frequency response: 27-500 Hz
- sensitivity: 99.9 dB
- 32-7/16"W x 16"H x 17-1/4"D1 x 13-7/8"D2
- warranty: 1 year
- MFR # 43DC122
What's in the box:
- Ported enclosure loaded with two 12" Subwoofers
- 4 Mounting brackets
- Four 1" Pan head screws
- Eight 5/8" Flat head screws
- Specification and mounting information
Customer reviews for Kicker 43DC122
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kicker 43DC122
Features & specs
General | ||
---|---|---|
Woofer Size (inches) | 12 | |
Speakers Per Box | 2 | |
Woofer Material | Polypropylene | |
Enclosure Type | Ported | |
Color | Black | |
Pieces in System | 1 | |
Width (inches) | 32-3/8 | |
Height (inches) | 16 | |
Depth (inches) | 17-1/4 | |
Connector Type | Spring post | |
Frequency Response | 27-500 Hz | |
Power Range (Watts RMS) | 300 | |
Maximum Wattage | 600 | |
Sensitivity | 95 dB | |
Impedance | 2 ohms | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year |
Product Research
Features
Speaker Terminals: The spring post terminals (one pair) are mounted on the left side of the enclosure and will accept pin connectors, single banana plugs, or bare wire up to 10 gauge.
Woofers: The Kicker 43DC122 enclosure uses two 12" Comp series subwoofers.
Break-in Period: Due to the complex nature of Kicker Comp speakers, they require a break-in period in order to produce optimum low-bass response. The suspension system is very stiff out-of-the-box. Approximately two weeks of daily playing will allow the suspension to break-in and reach its optimum equilibrium. Once broken-in, the subwoofer will exhibit stronger bass performance, smoother response, and greater low-bass extension.
The Kicker 43DC122 replaces these items
Kicker 10DC122
- ported enclosure with two Comp 12" subwoofers
- 2-ohm total impedance
- power handling: 100-300 watts RMS (600 watts peak power)
Loading...
Loading accessories...
Customer Q&A
8 questions already asked
Loading...
Loading articles...
Put this into my sons 2018 Compass with a Kicker 300/1 amp and it sounds so good. Takes me back 20 years and want to upgrade my truck now.
Aric from Levittown, PA