Chat
Contact us
Close contact box
Connect ID #
915 870 897 4
Connect ID #
915 870 897 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Kicker 40CWRT671 CompRT shallow-mount 6-3/4" subwoofer with dual 1-ohm voice coils

Item # 2064CRT671

If you're looking for bass for a tight space, Kicker designed their CompRT subs with compact cars, pickup...

If you're looking for bass for a tight space, Kicker designed their CompRT subs with compact cars, pickup...

7 questions - 11 answers

Item # 2064CRT671

About the Kicker 40CWRT671

John Pollard

A thin sub with big sub bass

If you're looking for bass for a tight space, Kicker designed their CompRT subs with compact cars, pickup trucks, and even motorcycles in mind. The low-profile 40CWRT671 6-3/4” subwoofer performs just like a full-size sub, but without killing all your cargo space. This high-performance CompRT sub stands less than 3" tall, so your installation options are wide open.

A thin sub with big sub bass

If you're looking for bass for a tight space, Kicker designed their CompRT subs with compact cars, pickup trucks, and even motorcycles in mind. The low-profile 40CWRT671 6-3/4” subwoofer performs just like a full-size sub, but without killing all your cargo space. This high-performance CompRT sub stands less than 3" tall, so your installation options are wide open.

Kicker 40CWRT671

This sub clocks in at less than 3" deep.

Built with boom in mind

The 40CWRT671 comes equipped with a rigid injection-molded polypropylene cone that won't flex and cause distortion while you're cranking the bass. Its rubber surround will last through years of heavy use, combining with a special-design back and top plate to give you more excursion (which equals more bass) than other skinny subs.   

Made to work with many systems

This sub handles up to 150 watts RMS so make sure you've got a solid amp to power it, and Kicker offers a compact PX Series amp that's a great match if you're trying to save space. You can wire the dual voice coils for either 2- or 1/2-ohm total impedance, giving you more wiring options when setting up your system. This sub sounds great in a sealed enclosure.

Important Note: If you are wiring this DVC sub for extremely low impedance, make sure that your amp is compatible. You can damage or destroy your amp by exceeding recommended minimum impedance.

READ LESS

Product highlights:

  • 6-3/4" subwoofer with dual 1-ohm voice coils
  • injection-molded polypropylene cone
  • rubber surround
  • power handling: 50-150 watts RMS (75 watts per coil)
  • peak power handling: 300 watts
  • frequency response: 30-500 Hz
  • sensitivity: 84.6 dB
  • top-mount depth: 2-3/4"
  • sealed box volume: .18 - .75 cu. ft.
  • warranty: 1 year
  • MFR # 40CWRT671

What's in the box:

  • One 6-3/4" Subwoofer
  • Kicker logo stickers
  • Manual (English/ Spanish/ German/ French)
  • Template on box

Customer reviews for Kicker 40CWRT671

Loading reviews...

Average review:

4.5 out of 5 stars
8 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

Product Research

Features

Dual 1-ohm Voice Coils: This woofer features dual 1-ohm voice coils, offering wiring flexibility. When the voice coils are wired in parallel the woofer presents a 1/2-ohm load. When the voice coils are wired in series the woofer presents a 2-ohm load.

Tinsel Leads: CompRT subwoofers use Spiralead tinsel-lead technology; the tinsel lead wires are woven into the spider to relieve mechanical stress.

Enclosure Compatibility

Shallow-Mount: Kicker's CompRT series is designed to minimize depth, giving you subwoofer options where standard enclosures don't fit. The vent-less, solid-pole design allows the woofer to be mounted directly against the rear wall of a sealed enclosure.

Recommended Enclosure: Kicker recommends a sealed enclosure for the 40CWRT671 (vented enclosures are not recommended):

  • Minimum Enclosure Volume: 0.18 ft³
  • Maximum Enclosure Volume: 0.75 ft³

Loading accessories...

Customer Q&A

7 questions already asked

Q
Can you mount this from your rear deck to replace 6x9's? Does it come with the bracket. I blew a 6x9 sub in my lincoln MKZ and would like to replace it with something like this.
brian  Feb 17, 2016
1 answer
A
You can check to see if this will fit your vehicle by using our Outfit My Car tool: http://www.crutchfield.com/car/carselector.aspx For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
kristina  Feb 17, 2016 (Staff)
Q
I know that the mounting requires 2-3/4 inch depth but what is the dimension required from the mounting face to the top without the grill?
richard  Feb 01, 2016
1 answer
A
I installed in the side panels on a 2000 Tran Am. This car came with the Monsoon factory stereo upgrade and I replaced the busted factory subs with these and used the factory grill to cover them with no clearance problems. I do not have the actual dimension.
kyle  Feb 02, 2016
Q
Will this sub work on my Samsung TV now I have a Polk audio sub and the sub woofer tore from age?
david  Oct 28, 2015
1 answer
A
This sub is designed for use in 12-volt car audio systems and given the low impedance it presents, it wouldn't work well in any sort of home audio application.
david  Nov 01, 2015 (Staff)
Q
is it compatable with jbl amps?
billy  Oct 25, 2015
5 answers
A
It is compatible with any brand amp, the important part is to match the impedance otherwise known as ohms.
john  Oct 27, 2015
A
Check the impedence of the amps. these are 1 ohm. won't shake the house but will re-inforce the lower end.
douglas  Oct 27, 2015
A
I don't know.I used mine with my Jeep's stock amp. But it should be compatible with anyamp really.
goldenflow glas  Oct 27, 2015
A
These subs offer multiple hook up options. Depends on the Ohm rating of the amp you are using. I am running my Subs at Two Ohms.
kyle  Oct 27, 2015
Q
Will this replace the stock sub in my 2001 z3 roadster 2.5?
john  Sep 07, 2015
1 answer
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
kristina  Sep 08, 2015 (Staff)
Q
Will this fit where my current bose subwoofer is? Thanks Brad
bradlee  Dec 08, 2014
1 answer
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
kristina  Dec 08, 2014 (Staff)
Q
Will this subwoofer fit where my bose sub is on an 08 gmc Sierra?
bradlee  Dec 08, 2014
1 answer
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
kristina  Dec 08, 2014 (Staff)
SHOW MORESHOW LESS

Loading articles...

Compare the sound