About the Kicker 40CSS654
It's time for an upgrade
It's time for an upgrade
Upgrading the old factory speakers in your car will give you a huge bump in sound quality, and Kicker designed CS Series speakers to get your sound system rockin' without breaking the bank. You'll enjoy your music even more when you hear all the details that your muddy-sounding factory speakers couldn't begin to reproduce.
Bring on the treble and the bass
Kicker's 40CSS654 component speaker set provides low end from a tough 6-1/2" polypropylene woofer, with a polyester foam surround that will stay strong for years to come. The separate 3/4" titanium dome tweeter takes care of the vocal and instrumental details that'll really bring your music to life. The outboard crossover network allows you to pick from three different tweeter level settings so you'll get balanced sound wherever you're sitting. Grilles are included.
Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.
Product highlights:
- component speaker system includes 2 woofers, 2 tweeters, and 2 crossovers
- 6-1/2" polypropylene woofers with polyester foam surrounds
- 3/4" titanium dome tweeters
- external crossover network with 3 tweeter levels (0, +3, +6 dB)
- power range: 2-100 watts RMS (300 watts peak power)
- frequency response: 35-21,000 Hz
- sensitivity: 90 dB
- top-mount depth: 1-13/16"
- warranty: 1 year
- MFR # 40CSS654
What's in the box:
Kicker 40CSS654 owner's manual
- Two woofers
- 2 Woofer grilles
- Two tweeters (each with 35" Wire attached)
- 2 Crossovers (each with 35" Input wire/ 35" Tweeter output wire/ 35" Woofer output wire attached)
- 2 Flush mount tweeter rings
- 2 Short tweeter mounting nuts
- 2 Long tweeter mounting nuts
- 2 Back angled tweeter rings
- 2 Front angled tweeter rings
- 2 Angled surface mount tweeter housings
- Twelve 1" Self-tapping screws
- Two 5/8" Self-tapping screws
- 8 Speed clips
- Four 7" Zip-ties
- 4 Red plastic butt connectors
- Owner's manual (English/ Spanish/ German/ French)
Featured video:
Customer reviews for Kicker 40CSS654
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kicker 40CSS654
Features & specs
General | ||
---|---|---|
Speaker Size | 6 1/2 | |
Design | 2-way | |
Tweeter Design | 3/4" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Titanium | |
Woofer Composition | Polypropylene | |
Woofer Surround | Polyester Foam | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 90 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 35 - 21k Hz | |
Minimum RMS Wattage | 2 | |
Maximum RMS Wattage | 100 | |
Peak Power Handling (Watts) | 300 | |
Top-mount Depth (Inches) | 1 13/16 | |
Bottom-mount Depth (Inches) | 2 1/8 | |
Cutout Diameter or Length (inches) | 4 7/8 | |
Mounting Height (Inches) | 0.433 | |
Frame Width | 6.25 | |
Frame Length | 6.25 |
Product Research
Features
Polypropylene Woofer Cones: The Kicker CS-series speakers feature durable polypropylene woofer cones, resistant to the moisture and temperature extremes found in automotive applications.
Ribbed Polyester Foam Surrounds: The ribbed polyester foam surrounds allow extended cone excursion for additional bass output and higher SPL.
Tweeter Mounting Options: The tweeters come with brackets to allow multiple mounting configurations: flush-mounted, angled flush-mounted (approximately 10°), and angled surface-mounted (approximately 15°).
Tweeter Dimensions:
Flush Mount | Angled Flush Mount | Angled Surface Mount | |
---|---|---|---|
Mounting Height | 0.238" | 0.563" | 1.272" |
Depth | 0.532" | 0.612" | 0.554" (screw depth) |
Frame Diameter | 1.976" | 1.976" | N/A |
Cutout Diameter | 1.57" | 1.587" | N/A |
Frame Width | N/A | N/A | 1.688" |
Frame Length | N/A | N/A | 1.897" |
Crossovers: The component system includes passive 2-way crossover networks for a seamless transition between the woofers and tweeters. The slope is 12dB per octave (both high pass and low pass) and the crossover point is 4000 Hz. A switch on each crossover allows you to set the tweeter output; 0 dB, +3 dB, or +6 dB. The crossovers' input and output wires are attached; the woofer output has quick slide terminals that connect directly to the woofer and the tweeter output has bullet terminals that mate to the terminals on the tweeter wires. The crossovers' dimensions are:
- Length: 4.595"
- Width: 2.463"
- Height: 1.004"
Woofer Mounting: In addition to fitting standard 6-1/2 and 4-hole 6-1/2 applications, the woofer also has a standard 6-3/4 bolt pattern. However, if mounted in a 6-3/4 location the holes for the smaller pattern create an air leak, which should be sealed using a speaker baffle, or something similar.
The Kicker 40CSS654 replaces these items
Kicker DS6.2
- polypropylene woofer with polyester foam surround
- 3/4" titanium dome tweeters
- 6-60 watts RMS power range
Loading...
Loading accessories...
Customer Q&A
12 questions already asked
Loading...
Loading articles...
nice sounding components.. and at a good price!! very easy too hook up.. Crutchfield helped me out with all the wires.. i got the hoooked up too a alpine mrx v70 and man does it sound great... very good buy if you clean loud sound..
johnnyA from hammond in