Kicker 40DCWR122

Ported enclosure with dual 12" CompR subwoofers

Item #: 2064DWR122

In Stock

3 Reviews | 7 questions - 8 answers

Your price: $399.99 Earn up to 400 Rewards points

Add to Cart Free Shipping Lifetime Tech Support

+ Add to wishlist + Email me alerts for this product

Ships Free From Manufacturer

View all associated offers

1.888.955.6000

Email

Chat

We don't check this item for fit or compatibility.

A match made in heaven...or Oklahoma

Kicker's 40DCWR122 loaded enclosure puts a pair of thumping 12" CompR subs behind your music. The rugged ported box was designed specifically for the subs, so you can count on getting maximum performance, no matter what kind of tunes you enjoy.

Side-view of Kicker 40DCWR122 dual 12" sub enclosure

The specially designed port gives you more bass without sounding sloppy.

Two hard-hitting CompR subs

Each 12” CompR subwoofer features a tough, polypropylene cone that stays rigid during intense play sessions so you hear accurate bass. A custom-designed back and top plate give the woofers plenty of room to travel, while the durable rubber surround helps to control cone movement during a heavy workout. These subs use extensive venting in their heavy steel baskets to shrug off heat, so you can count on reliable performance.   

Heavy-duty enclosure

Sturdy medium-density fiberboard ensures long-lasting performance from the enclosure, and the special-design side port enhances bass production without getting sloppy. The enclosure's 2-ohm impedance draws maximum power from your mono amplifier. This Kicker will handle up to 1,600 watts RMS, so make sure you pick an amp that'll make those CompR subs happy.

Product Highlights:

  • ported enclosure with two 12" CompR subwoofers
  • medium-density fiberboard construction covered with carpet
  • 2-ohm total impedance
  • power handling: 200-1,600 watts RMS (3,200 watts peak power)
  • frequency response: 25-500 Hz
  • sensitivity: 98 dB
  • 31-7/8"W x 16"H x 16-7/16"D1 x 13-7/16"D2
  • warranty: 1 year
  • Our 60-day money-back guarantee

Enclosed Subwoofers 101

An enclosed subwoofer is a box with a subwoofer already installed. The advantage to buying an enclosed sub is that the manufacturer made the sub, then designed and built the box as a perfect match, so you'll get the best possible performance. Every enclosed sub has a maximum RMS power handling rating, so pair it with an amp with a similar RMS power rating to get the best performance.

Preliminary info from the manufacturer

Kicker 40DCWR122 Reviews

Average Customer Review:

3 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

(0)
(0)
(0)
(0)
(0)

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
Rate the following specific attributes
  Value
 Sound Quality
 Ease of Use
 "Coolness Factor"
 Build Quality
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Great value and performance

Written By VictorS, Independence, MO on Monday, February 24, 2014

  • "Coolness Factor"
  • Build Quality
  • Ease of Use
  • Sound Quality
  • Value

I just picked this set of 12"s up in the Kicker box with a Kicker CX1200.1 and love the setup. Sounds and looks great in my Expedition. I've yet to really turn it up but it's nice to know I haven't hit their ceiling yet. I didn't want something where at its peak I wanted more, and with these I don't see that ever happening.

Pros: Price, design, value

Cons: None yet

great product

Written By mr b, santa maria, ca on Tuesday, December 17, 2013

Crutchfield Customer Review (What's this?)

  • "Coolness Factor"
  • Build Quality
  • Ease of Use
  • Sound Quality
  • Value

Fast shipping, wasn't expecting the quality.

Kicker 40DCWR122

Written By Brian, kennett square, pa on Wednesday, August 07, 2013

  • "Coolness Factor"
  • Build Quality
  • Ease of Use
  • Sound Quality
  • Value

I was at a local retailer a few weeks ago and saw this sitting on the shelf, it was very visually appealing to me. It was only hooked up to a little 300 watt kicker amp so i really wasnt expecting much. So i turned it on and turned the volume up to about 10-12 and it started pounding much harder then i expected. I turned it up to 16 and it was rattling everything around and the boom could be heard outside, that sold me right there considering i was planning on putting a 750.1 on them i could only imagine the power it would produce.

Pros: Everything

Cons: didn't find it sooner

Get everything you’ll need to enjoy your new Kicker 40DCWR122

It's critical to have good wire, and none is included with the sub.
Dynamat helps reduce ambient road noise and your vehicle's "rattles," making it easier for you to hear your music better. Easy to install.
Keep your sub from rolling around in your trunk by using mounting hardware.
T-Spec 16-gauge Speaker Wire

T-Spec 16-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW16WB1

(13)

T-Spec 12-gauge Speaker Wire

T-Spec 12-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW12WB1

(30)

Stinger PRO Series Speaker Wire

Stinger PRO Series Speaker Wire

Priced per foot (16 Gauge)

Item #: 541SPW516B

(51)

Dynamat SuperLite Tri-Pak

Dynamat SuperLite Tri-Pak

Triple package — 3 sheets, 12 square feet (Model #10612)

Item #: 15410612

(17)

$69.99
Add to Cart
Dynamat Xtreme Wedge Pack

Dynamat Xtreme Wedge Pack

1 sheet, 4 square feet

Item #: 15410425

(7)

$39.99
Add to Cart
Dynamat 19100

Dynamat 19100

License Frame Kit

Item #: 15419100

(15)

$14.99
Add to Cart
Dynamat Xtreme Trunk Kit

Dynamat Xtreme Trunk Kit

5 sheets, 20 square feet

Item #: 15419405

(13)

$169.99
Add to Cart
Dynamat Dynaliner

Dynamat Dynaliner

One 54" x 32" sheet (1/8" thick)

Item #: 15411101

(6)

$69.99
Add to Cart
Box Brackets

Box Brackets

Item #: 125B702KIT

(5)

Autosound 2000 Disc One

Autosound 2000 Disc One

Low Frequency Test CD (Disc One)

Item #: 503CD101

(1)

$19.99
Add to Cart
Autosound 2000 Disc Five

Autosound 2000 Disc Five

System Demonstration — Test CD

Item #: 503CD105

Questions & Answers Ask the community. Share your knowledge.

7 questions already asked

We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question. [ Krissy  Sep 29, 2014 ]  Staff
Gracias por su interés en efectuar sus compras con Crutchfield. Para servicio en español, por favor, contáctenos al 1-800-955-9039 y con mucho gusto uno de nuestros representantes le ayudará. [ Krissy  Aug 28, 2014 ]  Staff
We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question. [ Greg  Aug 04, 2014 ]  Staff
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Krissy  Feb 24, 2014 ]  Staff
The 40DCWR122 has a single wiring terminal out for wiring at 2-ohms. Since that's what the 12CX1200.1 operates at you'll go from negative on the subwoofer input to negative of the amplifier output and do the same for the positive. You should be all set from there! [ Krissy  Feb 25, 2014 ]  Staff
A good rule of thumb for speakers is to get an amplifier that is up to twice the RMS of the speakers at the proper ohms. That amp will work perfect. It is better to over power speakers then under power them, that when speaker damage will occur. [ Matthew  Jan 28, 2014 ]
Ideally you don't want to push more than 1,600 watts RMS to these subs. If your amp is pushing out more than that, you can always set the gain down. However, with an amp that is double the power, you might want to consider an amp that will be a closer match power wise. [ Jeff  Jan 19, 2014 ]  Staff
The sub box has a single set of 2-ohm inputs. This will mean that you need to bridge a 2-channel amp. You will want to make sure your amp is 2-ohm compatible in mono. [ Jeff  Dec 16, 2013 ]  Staff